Page 2 - Warning regarding data loss:; Caution for usage environment
EN Introduction Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. Keep the instructions handy for future reference. To ensure successful recordings, we recommend that you test the record function a...
Page 3 - Battery handling precautions; Getting started
EN f Caution: • Stop using the recorder immediately if you notice any unusual odors, noise, or smoke around it. Never remove the batteries with bare hands, which may cause a fire or burn your hands. • Be careful with the strap. Be careful with the strap when you carry the recorder. It could easily c...
Page 4 - Setting time and date; Recording
EN Inserting batteries ▼ Strap hole (Strap is not supplied.)When [ ] appears on the display, replace the batteries as soon as possible. When the batteries are too weak, [ ], [LO] and [bATT] appears on the display and the recorder shuts down. " • Remove the batteries if you are not going to use t...
Page 5 - Playback
5 EN • If the number of files inside the recording folder reached 200 or the memory becomes full, you will not be able to record any further, and [FULL] will be displayed. Select another folder or delete any unnecessary file before recording. • When the remaining recording time is less than 60 secon...
Page 6 - Erasing; Menu setting method
6 EN Cancel the segment repeat playback function: To cancel the segment repeat playback, press either STOP ( 4 ), REC ( s ), 9 , or the 0 button. " • If you press and hold 0 and rewind past the start position, or press and hold 9 and fast forward past the end position, the segment repeat playbac...
Page 8 - Formatting the recorder; Troubleshooting
EN [ON]: Enables the alarm playback function.[OFF]: Disables this function. 1 Select [ ON ] and press the ` OK button. • The “hour” will flash on the display. Press the + or − button to change the setting. Press the ` OK or 9 button to set. • Repeat steps 2 and 3 to set the “minute”. Press the + or ...
Page 9 - Specifications
EN Q2: Nothing happens when a button is pressed. A2: • The POWER switch may be set to the [OFF/HOLD] position. Slide the POWER switch to the [ON] position. Q3: No sound or quiet sound is heard from the speaker while playing back. A3: The earphone plug may be plugged into the recorder. The volume may...