Olympus MAUSB-10 - Manuals - manualsarea.com

Page 2 - Introduction; Main features; Supports Hot Plug for USB connection.; Trademarks; Declaration of Conformity

2 Introduction Thank you for purchasing our product.This product is exclusively for reading and writing data to an xD-Picture Card/SmartMedia. You can transfer largeamounts of data to and from the card quickly and easily using a computer equipped with a USB port (IBM PC/ATcompatibles and Macintosh)....

Page 3 - Contents; Macintosh OS X

3 Contents Introduction .................................................................................................................................... 2 Contents .......................................................................................................................................

Page 5 - Before getting started; System requirements; Compatible operating systems; Supported cards; SmartMedia; Precautions

5 Before getting started System requirements Your computer must conform to the following minimum standards in order to use it with the MAUSB-10. ● Compatible operating systems IBM PC/AT compatible: pre-installed Windows 98/98 SE/Me/2000 Professional (referred to as Windows 2000 in this manual)/XP Po...

Page 6 - Getting started; Windows; Place provided

6 Windows Macintosh [USB 1.1 compatible] Turn on computer. Place provided Installation CD-ROM in CD-ROM drive. *2 Install driver. *2 Restart computer. *2 Connect to computer. Get started! *4 *1 : Windows 95/3.1/NT are not compatible.*2 : You only need to perform this procedure before using the MAUSB...

Page 7 - Click the “Next” button.

7 How to install Also refer to your computer’s user manual and the manuals for any optional devices you are using. 1 Turn on the computer <98/98 SE/Me ⽧ Install> Turn on your computer’s power (and connected devices) to start Windows. 2 Install the device driver <98/98 SE/Me ⽧ Install> Wh...

Page 8 - During installation, the window at right appears.

8 <98/98 SE/Me ⽧ Install> 4. During installation, the window at right appears. * The installation time may vary, depending on your computer. 5. When the driver installation is complete, thewindow at right appears.Click the “Finish” button. The device driver is now installed.Once the driver has...

Page 9 - When the “Add New Hardware Wizard” window appears

9 1. Double-click “My Computer”. <98/98 SE/Me ⽧ Install> 2. Right-click “OLYMPUS”. Select “Open” from the pop-up menu. 4. Double-click “SETUP”. * The “OLYMPUS USB Reader/Writer InstallShield Wizard” window appears. Startinstalling by following “Install the device driver”( 墌 p. 7). 1. Disconnec...

Page 12 - Inserting a card; Close the card cover.; Notes

12 2 Inserting a card <98/98 SE/Me ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding cardslot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down. Insert the card all the wayinto the l...

Page 13 - Removing a card; Note; “My Computer” on the desktop.

13 3 Removing a card <98/98 SE/Me ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer, graphics applications), thenfollow the steps below. Attention! If you do not follow the steps below, the data on the card(s) may be damaged. Note NEVER open the card cover...

Page 14 - Copying files from a card; drop

14 4 Copying files from a card <98/98 SE/Me ⽧ Operation> 4. Drag the file icons you want to copy and drop them onto the destination folder. * The process is the same as copying files from a floppy disk. * It is also possible to move files to another folder, erase files, or write data from anot...

Page 15 - Make sure that the status lamp is NOT on.; Open the card cover and remove the card (

15 5 Formatting a card <98/98 SE/Me ⽧ Operation> 6 Disconnecting the MAUSB-10 <98/98 SE/Me ⽧ Operation> Close all software programs that are using the card (e. g. Explorer, graphics applications), then follow the stepsbelow. 1. Make sure that the status lamp is NOT on. * If the status la...

Page 16 - How to uninstall the device driver

16 How to uninstall the device driver <98/98 SE/Me> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 isdisconnected from the computer’s USB port, then follow the steps below.* On-screen displays or messages may vary depending on the version of Windo...

Page 17 - A confirmation window appears. Click “OK”.

17 How to uninstall the device driver (Cont.) <98/98 SE/Me> 4. A confirmation window appears. Click “OK”. 5. The “InstallShield Wizard” window appears. 6. The window at right appears. Click the “Finish”button. 7. The window at right appears. Select “Yes, Iwant to restart my computer now.” if y...

Page 18 - How to install; Turn on the computer; When the “Found New Hardware Wizard” window appears

18 How to install Also refer to your computer’s user manual and the manuals for any optional devices you are using. 1 Turn on the computer <2000/XP ⽧ Install> Turn on your computer’s power (and connected devices) to start Windows 2000/XP. To install the device driver, log on with the user name...

Page 21 - Operating the MAUSB-10; Connecting to the computer; Installing the new hardware

21 Operating the MAUSB-10 The operating procedures for the MAUSB-10 under Windows 2000/XP are described below. 1 Connecting to the computer <2000/XP ⽧ Operation> After installing the device driver, connect the MAUSB-10’s connector to the USB port on your computer. (Youcan plug in the USB conne...

Page 22 - The searching window appears.; Click the “Continue Anyway” button.

22 <2000/XP ⽧ Operation> [Installing the hardware] 1. The “Found New Hardware Wizard” windowappears when the MAUSB-10 is connected toWindows XP for the first time.Make sure that “Install the software automatically[Recommended]” is selected and click the “Next”button. * On Windows 2000, the har...

Page 28 - Formatting a card; Otherwise, formatting the card will be impossible.

28 5 Formatting a card <2000/XP ⽧ Operation> [Before formatting the card] • To format a card, log on with the user name “Administrator”, or use a user name with administrator privileges. Otherwise, formatting the card will be impossible. • If a card is going to be used with a digital camera, b...

Page 29 - Disconnecting the MAUSB-10; Click the “OK” button.

29 6 Disconnecting the MAUSB-10 <2000/XP ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer, graphics applications), then followthe steps below. 1. Make sure that the status lamp is NOT on. 2. Left-click the “Unplug or Eject Hardware” icon on the taskbar. 3...

Page 30 - “Add or Remove Programs”.

30 How to uninstall the device driver <2000/XP> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 isdisconnected from the computer’s USB port, then follow the steps below.* On-screen displays or messages may vary depending on the version of Windows y...

Page 32 - Turn on your computer’s power (and connected devices) to start Mac OS.; The “OLYMPUS” icon appears on the desktop.

32 How to install Also refer to your computer’s user manual and the manuals for any optional devices you are using. 1 Turn on the computer <Mac OS 8.6~9.2 ⽧ Install> Turn on your computer’s power (and connected devices) to start Mac OS. [Notes] • Do NOT connect the MAUSB-10 to the computer unt...

Page 33 - Install the device driver; the “Mac OS 9” folder.

33 3 Install the device driver <Mac OS 8.6~9.2 ⽧ Install> When using the MAUSB-10 for the first time, you must first install the device driver included on theprovided CD-ROM. 3. Double-click the “Mac OS 9” folder. 4. Double-click “USB Reader_Writer”. Before installation, make sure that:• Your ...

Page 34 - Click the “Restart” button.

34 <Mac OS 8.6~9.2 ⽧ Install> 6. Click the “Restart” button. The device driver is now installed.(Remove the CD-ROM from the CD-ROM drive and store it in a safe place.) 5. When the Mac OS 8.x, 9.x installer starts up, thewindow at right appears. Confirm “Install Location”, then click the “Insta...

Page 37 - the card’s icon

37 3 Removing a card <Mac OS 8.6~9.2 ⽧ Operation> Close all software programs that are using data on the card (e. g. graphics applications), then follow the stepsbelow. Attention! If you do not follow the steps below, the data on the card(s) may be damaged. 2. Make sure that the status lamp is...

Page 39 - the hard disk; Drag and drop; the files onto the Trash icon.

39 How to uninstall the device driver <Mac OS 8.6~9.2> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 isdisconnected from the computer’s USB port, then follow the steps below. 1. From the desktop, double-click the hard disk icon. Drag & Drop 5...

Page 40 - It is not possible to uninstall the device driver in Mac OS X.; system is configured.

40 How to install Also refer to your computer’s user manual and the manuals for any optional devices you are using. 1 Turn on the computer <Mac OS X ⽧ Install> Turn on your computer’s power (and connected devices) to start Mac OS. [Notes] • Do NOT connect the MAUSB-10 to the computer until ins...

Page 41 - the “Mac OS X” folder.

41 3 Install the device driver <Mac OS X ⽧ Install> When using the MAUSB-10 for the first time, you must first install the device driver included on theprovided CD-ROM. 1. Double-click the “OLYMPUS” icon. 2. Double-click the “MAUSB-10” folder. 5. The window at right appears.Click the lock icon...

Page 45 - * The titles of the cards vary depending on the

45 2 Inserting a card <Mac OS X ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding cardslot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down. Insert the card all the wayinto the left...

Page 48 - Troubleshooting; PROBLEM

48 Troubleshooting Windows The status lamp (green) doesnot light. A “Found New HardwareWizard” window appears whenyou connect the MAUSB-10. The MAUSB-10 doesn’t workeven after installing the driverand connecting the MAUSB-10to the computer. “?” appears in Device Manager.(This is after you have perfo...

Page 49 - Macintosh

49 Troubleshooting Macintosh The status lamp (green) doesnot light. No card icon(s) appears on thecomputer’s screen. You can read a card, but notwrite to it. You cannot write with aSmartMedia. The error message “FileSharing is invalid.” appears. The card(s) is not insertedcorrectly. The card cover i...

Page 50 - Specifications

50 Specifications * The specifications in this manual are subject to change without prior notice. * For the latest information, visit the OLYMPUS web site (http://www.olympus.com). * 1 Some cards with ID are not generally available for purchase. Consult your nearest SmartMedia dealer for details.(OL...

Page 51 - Glossary of Terms; A group of data, such as a document comprised of text and images.

51 Glossary of Terms A program used to operate or manage a peripheral device (printer, modem, digitalcamera, USB reader/writer, etc.). Without the proper driver installed, a peripheraldevice will not be recognized by the computer. A window that appears on the monitor when the computer requires user ...