Nuvo 500 - Manuals - manualsarea.com

Page 2 - Never; READ BEFORE YOU START

~2~ ~3~ 1. LOCATING YOUR WINE CELLAR - Remember, it is not an appliance, it is a piece of furniture 2. AREA FOR ASSEMBLING YOUR WINE CELLAR Choose a clear 12’ by 12’ area with a level floor and carpeting to help reduce scratching of surfaces. 3. TOOLS * Hex wrench (included) * Phillips screwdriver *...

Page 3 - Hardware quantities for Model 500 are indicated in parenthesis.; HARDWARE KIT

~2~ ~3~ Cam Cap x 26 (x30)* Hex bolt x 22 (x30)* Coupler screw x 8 Hex wrench x 1 Cam x 24 (x28)* Cam Pin x 24 (x28)* Coupler hanger x 4 Hinge x 4 In Cooling Unit Box Hex Bolt (Flange) x 2 Panel Insulation Strip *NOTE : Hardware quantities for Model 500 are indicated in parenthesis. HARDWARE KIT C B...

Page 4 - STEP 1 : PANEL PREPARATION; TAB

~4~ ~5~ Open Boxes VP6 and VP7. Install INSULATION STRIP (J) to Back, Top, and Bottom Panels. PUSH IN FULLY! Insert Cam Pins (F) in BACK PANEL’S predrilled holes down to TAB. (May require some force) STEP 1 : PANEL PREPARATION 1 PANEL EDGE J CAUTION : 1. Watch for sharp staples on boxes.2. DO NOT ST...

Page 5 - STEP 2 : CABINET ASSEMBLY; MET

~4~ ~5~ Use allen key provided or #3 phillips screwdriver. Attach TOP and Bottom to Back by CAREFULLY aligning edge holes over Cam Pins and gently push together to avoid damaging cam pins. DO NOT BANG OR SLAP PANELS TOGETHER!!! Insert Cam, push all the way in under panel level (may require some forc...

Page 6 - STEP 2 : CABINET ASSEMBLY CONTINUED; BOTT

~6~ ~7~ Insert Cam Cap (A) in all Cam Holes . 3 STEP 2 : CABINET ASSEMBLY CONTINUED TOP !!! Open Box VP5 or VP2. Insert Cam Pins (F) in BACK PANEL’S predrilled holes down to TAB. (May require some force) Attach SIDES to Back/Bottom/Top by CAREFULLY aligning edge holes over Cam Pins and gently push t...

Page 7 - STEP 3 : HINGE,BASE AND LEGS INSTALLATION

~6~ ~7~ Open Box VP3. Fasten one HINGE (found in door box) to the SIDE of the cabinet Install four LEGS (H) into BASES fully in. Fasten FRONT BASE to the BOTTOM of the cabinet ( FRONT BASE has to be set with end tabs away from front edge) Fasten BASE with HEX BOLTS (B) 4 1 3 4 STEP 3 : HINGE,BASE AN...

Page 9 - STEP 5 : COOLING UNIT INSTALLATION; GET HELP; KEEP UNIT LEVEL; CHECK; bolts in

~8~ ~9~ STEP 5 : COOLING UNIT INSTALLATION GET HELP BEFORE INSTALLING AND KEEP CHILDREN CLEAR OF CELLAR CONSTRUCTION AREA. Get helper to help guide unit, keep light cord clear of edge inside cellar and to prevent tipping of cellar. MAKE SURE INSULATION STRIP IS IN CORRECT ORIENTATION . Run light cor...

Page 10 - STEP 6 : LIGHT AND LIGHT COVER INSTALLATION

~10~ ~11~ STEP 6 : LIGHT AND LIGHT COVER INSTALLATION 4 Insert LIGHT COVER to holes pre drilled on front edge of TOP panel. 2 Plug cord to LIGHTS and 1 Remove plastic CAP at right end for only LIGHT , DO NOT remove CAP from LIGHT . CAP 1 LIGHT 2 LIGHT 1 2 3 Insert LIGHT to LIGHT COVER 1 2 Cord behin...

Page 11 - STEP 7 : DOORS INSTALLATION

~10~ ~11~ 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 4 5 6 7 1 2 3 5 6 7 1 2 3 4 5 6 7 1 2 4 5 6 7 1 2 3 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 5 6 7 1 2 3 4 5 6 7 1 2 4 5 6 7 1 2 3 4 5 6 7 1 2 3 5 6 7 1 2 3 4 5 6 7 4 4 33 444 Install TOP HINGES with HEX BOLTS ( B) NOTE : STEP 7 : DOORS INSTALLA...

Page 12 - CONTROLS : PLUG IT IN; KEYS; A L

~12~ ~13~ FEATURES: - Default SET temperature 57º F/14º C (ideal for wine storage). - Calibration option of the temperature sensor. - Display of actual temperature by request. - SET temperature range 52ºF-64ºF. - Digital temperature sensor. - Dual display Fº/Cº. - Settings are stored in memory for p...

Page 13 - MAXIMUM CAPACITIES AND LOADING TIPS

~12~ ~13~ MAXIMUM CAPACITIES AND LOADING TIPS 8 MODEL 500 220 248 � 38 40 40 26 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Max 4" dia.bottles Max3.5" dia.bottles 3 rows3" dia.or 2 rows4.5" dia. Max: 506 3" bottles 26 2 12 8 8 4 MODEL 250 110 124 � 19 ...

Page 14 - TROUBLE SHOOTING GUIDE

~14~ ~15~ TROUBLE SHOOTING GUIDE Although each Vintage Keeper cooling unit has been carefully tested at every stage of manufacture, occasional problems arise, the majority of which are due to rough or careless handling during shipping or installation. Other problems may derive from improper cabinet ...

Page 15 - LIMITED WARRANTY AND PRODUCT SUPPORT

~14~ ~15~ LIMITED WARRANTY AND PRODUCT SUPPORT ONE YEAR LIMITED WARRANTY If your Koolspace cooling unit or cabinet fails to perform as designed within one year of the date of purchase, VINTAGE KEEPER INC. warrants that, upon your request, it will be repaired or replaced, at our option, during the on...

Page 16 - C E L L A R; nuvo

~16~ Toll free: 1-888-274-8813 www.koolspace.com 2 5 0 / 5 0 0 C E L L A R nuvo k o o l s pa c e TM