Nutone NP64000 - Manuals - manualsarea.com

Page 3 - INTERIOR BLOWERS

HL0070 - 3 - RMP Series Backsplash (Stainless Steel wall covering with warming shelves. Optional) Model 418 10” round adjustable elbow (optional) Model 412 transition(3 1 / 4 ” x 10” to 7”) Adapter and damper 3 1 / 4 ” x 10” (supplied with P5 blower) Adapter and damper 3 1 / 4 ’’ x 14’’ (supplied wi...

Page 4 - IN-LINE AND EXTERIOR BLOWERS

- 4 - HL0071 RMP Series Backsplash (Stainless Steel wall covering with warming shelves. Optional) NP64000 SERIES HOOD - NP64000 SERIES RANGE HOOD SYSTEM - IN-LINE AND EXTERIOR BLOWERS 332KR in-line and exterior blowerrough-in kit - Purchase separately. Model 418 10” Rd adjustable elbow (optional) Mo...

Page 5 - SELECT BLOWER OPTION AND INSTALL DUCTWORK; TYPICAL RECTANGULAR DUCTWORK

- 5 - 1. SELECT BLOWER OPTION AND INSTALL DUCTWORK Either an interior or exterior blower or in-line blower may be used with this hood. The NuTone premier NP64000 Series mustbe installed with blower models P5, P8, HLB3, HLB6, HLB9, HLB11, 331H, 332H, 335 or 336 only. Other blowers cannot be substitut...

Page 6 - PREPARE THE INSTALLATION

- 6 - 2. PREPARE THE INSTALLATION Make sure that the following items are included: - Range hood - Accessories: • Filters • Bag of parts including: (4) lock nuts, (1) wire clamp, (8) 1 / 2 ” double thread screws, (2) wire connectors, (2) 1 / 2 ” standard screws, (6) 3 / 8 screws. Parts sold separatel...

Page 7 - CAUTION

- 7 - Removing horizontal knockout opening on back of hood HD0076 5. CHOOSE THE OPENING (INTERIOR BLOWER) Remove the knockout for the chosen opening (horizontal at the back of the hood or vertical on rough-in plate). See pictures below. CAUTION When using P5 blower, remove the 10’’ wide knockout (sm...

Page 9 - WARNING

- 9 - 10. CONNECT WIRING (ALL BLOWERS) INTERIOR BLOWER: Connect cable into wiring box using wire connectors. Connect wires as follow: BLACK to BLACK, WHITE to WHITE andGREEN or BARE wire under ground screw. Reinstall wiring cover. DO NOT FORGET TO CONNECT THE GROUND . IN-LINE OR EXTERIOR BLOWER: Rem...

Page 10 - Never plug the 2-prong blower cord to the 3-prong power supply cord.

- 10 - 11. INSTALL THE BLOWER (INTERIOR BLOWER) (CONT’D) Secure the blower by installing 2 more screws into the locations shown in the pictures below (single blower or dualblower). Reinstall impeller(s) and cover. Plug the power supply to the 3-prong male connector ( A ) and the blower unit into the...

Page 12 - BLOWER

- 12 - 15. USE AND CARE (CONT’D) Hood cleaning Stainless steel cleaning: How to maintain its « BRIGHT LOOK » Do: - Regularly wash surfaces with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent. - Always clean in the direction of original polish lines. - Always rinse w...

Page 13 - HEAT SENTRY; Never place highly flammable material under warming lamps.; WARRANTY

- 13 - WARMING LAMPS (INFRARED) Each warming lamp is controlled with its own ON/OFF switch. Use infrared light bulbs (120V, IR175W, PAR38) or white halogen bulbs (120V, 90W, PAR38) if food warming shelves arenot used. HEAT SENTRY This hood is equipped with a Heat Sentry thermostat. This thermostat i...

Page 14 - SERVICE PARTS

KEY QTY (hood width) # PART NUMBER DESCRIPTION 30” 36” 42” 48” - 14 - 1 7 8 9 10 1 7 16 16 16 4 5 13 11 12 6 14 15 3 2 19 18 16 1 1 16 17 HL0073 SERVICE PARTS NP64000 Series 123456789 1011 1213141516 17 18 19 V02264V02773V02772V03435V03436V03501V03507V03502V03503V03504V03505V03517V03518V03519V03520V...

Nutone NP64000 - Manuals

Manuals:

Manual Nutone NP64000

Summary

Nutone Manuals