Page 2 - WARRANTY INFORMATION; number is required for all repairs/returns.; COPYRIGHT; notification to its users.; Damage to devices connected
WARRANTY INFORMATION The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.nti1.com for information regarding repairs and/or return...
Page 4 - needed without having the CPU there too, taking up valuable space; Materials; Materials Included with this kit:; This owner's manual; Introduction
1 Introduction The XTENDEX Series ST-C5KVM-600 PS/2 KVM Extender is designed to enable one PS/2 CPU to becontrolled by two users, one local and one remote. The remote user can be located as much as 600 feet awayfrom a PS/2 CPU via Category 5 shielded twisted-pair cable. The local user will be locate...
Page 5 - S T - C 5 K V M - 6 0 0 L o c a l U n i t; F E A T U R E S A N D F U N C T I O N S; TI; N T I; TI
2 Features and Functions 1. Green LED- traffic indicator- illuminates when there is communication between the local and remote units. 2. Yellow LED- power indicator- illuminates when power has been supplied to the unit 3. Cat 5- RJ45 female- for connecting the CAT 5 cable 4. Video Connector- 15HD fe...
Page 6 - NOTE; Preparation for Installation
3 Limitations • Hot-plugging of devices is supported provided devices were originally connected at power-up. • Devices connected to the Local and Remote Units must be identical. Same mice, same keyboards, etc. • In order for two users to share a PS/2 CPU, the user in control must pause for at least ...
Page 7 - The Local Unit; on it to the keyboard port on the back of the CPU.; Figure 1- Connect the Local Unit to the CPU; Installation
4 Installation The Local Unit 1. Plug the cables of the Local Unit into the back of the CPU. (See Fig. 1.) a) Connect the purple 6 pin miniDIN cable end with the keyboard symbol on it to the keyboard port on the back of the CPU. b) Connect the green 6 pin miniDIN cable end with the mouse symbol on i...
Page 8 - Figure 2- Connect Local User Components to Local Unit; the cable end should snap into place.; V G A; F r o n t V i e w o f; S T - C 5 K V M - 6 0 0 L o c a l U n i t ( F r o n t a n d R e a r V i e w ); R e a r V i e w o f L o c a l U n i t; L o c a l U s e r ' s K e y b o a r d , M o n i t o r , a n d M o u s e
5 Figure 2- Connect Local User Components to Local Unit 3. Connect the CAT5 cable to the “Cat 5” port on the Local Unit. (See Fig. 2.) When properly inserted the cable end should snap into place. Note: If an RJ45 wall outlet is being used, connect the other end of the extension cable to the RJ45 wal...
Page 9 - R e m o t e U s e r ' s K e y b o a r d , M o n i t o r , a n d M o u s e
6 The Remote Unit 1. Position the Remote Unit such that the CAT5 cable, the monitor cable, device cables, and the AC adapter power connector can each reach the Remote Unit comfortably. 2. Connect the monitor cable to the female 15HD video connector on the Remote Unit. 3. Connect the device(s) to the...
Page 10 - Figure 4- Connect the AC adapter to the Remote Unit; P o w e r C o n n e c t o r; R e a r V i e w o f R e m o t e / L o c a l U n i t
7 4. Make sure the CAT5 cable has been installed in accordance with the “Preparation for Installation” instructions on page 3. Connect the CAT5 cable to the “Cat 5” port on the Remote Unit. (See Fig. 3.) When properly inserted the CAT5 cable end should snap into place. Note: If an RJ45 wall outlet i...
Page 11 - Pin; Video Quality
8 Video Quality Video quality adjustment is done automatically to assure the image is as clear as possible. Note: When the cable is longer than 300 feet some colored lines can be seen at the black-to-whitetransitions. This is a normal behavior and is caused by the different twisting rates of each pa...
Page 12 - No Video on monitor; Troubleshooting
9 Troubleshooting Each and every piece of every product produced by Network Technologies Inc is 100% tested to exactingspecifications. We make every effort to insure trouble-free installation and operation of our products. Ifproblems are experienced while installing this product, please look over th...
Page 13 - CE remark; SERIAL NO:
10 1. NTI Model Number and Serial Number (from the bottom) of the Local Unit and the Remote Unit. Local M/N __________ S/N ______________ Remote M/N __________ S/N ______________ 2. The total length of the CAT5 extension cable in use.______ 3. Make and Model Numbers of the Monitor, Mouse, and Keyboa...