NTI 17-N-PRIMUX - Manuals

2 (Rear View) CAT5 Cableto User Station Cable to CPU Terminating Plug (Supplied) Hardware Setup 1. Disconnect power from the CPU. Note: The Host Adapter must be connected to the CPU before power is connected to the CPU. Failure to do so may result in damage to the Host Adapter. 2. Plug the Host Adap...

3 5. Connect the power cord to the User Station. 6. Press the switch to power-up the RACKMUX. 7. Plug in the power cord(s) and power-up the CPU(s). Daisy-Chained Host Adapters Up to 64 CPUs can be connected in a daisy-chain to a create a segment of CPUs controlled by a single user from a User Statio...

4 Initial Startup Upon startup, the Command Mode screen will be displayed, autologging you in as NEWUSER1 without administrative rights. No password will be necessary. As NEWUSER1 you have full access to all Host Adapters and their connected CPUs. To logout as a user, press < L > and the login...