Nokia 9860 S - Manuals

GB 6 AUDIO L Rphono connectors Stereo outputs forconnection to a HiFisystem TV SCART for connec-tion to theTV AUX SCART for connection to a VCR,or an analogue satellitereceiver * LNB cable also feeds the LNB with asupply voltage of 13/18 V (V/H polarisa-tion) and a 0/22 kHz signal (bandswitch).Max L...

GB 7 Pay TV Services with a Smartcard (Viaccess) Only for Pay-TV services coded with the Viaccess CA system. • Insert your Smartcard fully into the lower left slot (Smart Card 2) behind the lid of the front panel of the Mediamaster. Thegold chip should face downwards and inwards . PIN Code The Smart...

GB 8 The box for your Mediamaster should contain thefollowing items: • the Mediamaster • a remote control with 2 AAA batteries • a SCART lead (fully featured 1,0 metre) • an aerial/RF lead (double screened 1,5 metres) • an Owner’s Manual (this document) • a Software License agreement INSTALLATION OF...

GB 9 Connecting the Mediamaster to the TV • Connect the SCART lead between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. • Connect an RF lead from the TV/VCR output on the Mediamaster to the RF input socket on the TV. • Connect the TV aerial to the TV AERIAL input socke...

GB 10 Connecting an Analogue Satellite Receiver and VCR Nokia Smart Priority Switch Analogue receiver Mediamaster Connecting a HiFi System • Connect an RCA/Cinch stereo cable from the AUDIO L R sock- ets on the Mediamaster to the LINE, AUX, SPARE or EXTRAinput sockets on your HiFi system. • If avail...

GB 11 This procedure is necessary only if your Mediamaster is con- nected to the TV with an RF lead and no SCART leads areused. To tune your TV to the RF signal you might also need your TVmanual in addition to this manual. The steps below explain whatto do if you have been unable to use SCART leads ...

GB 12 Language Select the desired menu language.This will also be the main language for audio and subtitling. General Information Once you have correctly connected the Mediamaster, you alsohave to perform a “First Time Installation.”During this procedure, helpful information is displayed at the bot-...

GB 13 Antenna/Satellite Selection Select one of the alternatives from line 1 to 5 if you have a sin-gle antenna equipped with one LNB for receiving signals fromeither NILESAT, HOTBIRD, ASIASAT, ARABSAT or PANAMSAT. Select the alternative from line 6 if you have one antenna withtwo LNBs or two antenn...

GB 14 FIRST TIME INSTALLATION * ) About Signal Strength (AGC)and Signal Quality (SNR) The different signal indicators at the top of the menu provide in-formation about two things: AGC: The AGC, shown with a red bar , will indicate the average strength of any incoming signal, digital as well as analo...

GB 16 Line on the Antenna Satellite SelectionMenu One Antenna/One LNB Configuration Select this alternative if you have one LNB mounted on the an- tenna and you want to select another, not preprogrammed, sat-ellite. LNB Type Select the local oscillator (L. O.) frequency valid for the presentLNB. The...

GB 17 Multisatellite/DiSEqC Switch Configuration Select this alternative if your antenna system has more than one LNB . You can connect up to 4 LNBs. The selection of the different LNBsmust be controlled by an external switch. Refer to page 15, “Con-nection of a DiSEqC switch.” FIRST TIME INSTALLATI...

GB 18 Channel Search Progress This menu will be shown as long as the Mediamaster is search-ing for channels to download All channels found will be listed in two columns on the screen;with TV channels in one column and Radio channels in the other. Please note that the search procedure may take a few ...

GB 19 VIEWING MODE General Information The following describes the basic functions of your Mediamasterwhile watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on theService Provider and can only be used if they are included inthe transmitted pro...

GB 20 VIEWING MODE The “i” (Information) Button The Mediamaster has the ability to display information about pro-grammes currently being broadcast as well as those being broad-cast next. This procedure is the same for both TV and Radio mode. • By pressing the “ i ” button while watching TV you will ...

GB 21 List of TV or Radio Channels At the channel search procedure, two Channel lists are created.One list named “All TV” containing all channels, and anothernamed “Free TV” containing only free channels. In the “All TV” list scrambled channels are marked with a pictureof a Smartcard (if this inform...

GB 22 VIEWING MODE TV Release (0) With the 0 button you can toggle between analogue terrestrial TV, video, analogue and digital satellite TV signals.(This is only valid if the units are connected via SCART cables, andnot by a RF connection.) Video Recording Please note, that during the recording of ...

GB 23 MAIN MENU General Information Many of the functions of the Mediamaster are available from theMain Menu. • Press MENU to open it. TV and Radio Channels Please refer to “List of TV and Radio channels” on page 21. Edit Channels From these menus you can create and edit channel lists. You can,among...

GB 27 MAIN MENU Update Channels When new TV and radio channels are added to the different sat-ellites, you can check and automatically update the main and freechannel lists. New channels will be marked with a star in the channel lists. After each download, check the channel lists for new channelsmar...

GB 28 MAIN MENU System Configuration You will be asked to enter your access code before you can openthis menu. The code is preset to 1234 from the factory.(The code can be changed from the Parental Control menu. Re-fer to page 34.) If you want to customize the system to suit you better, you canspeci...

GB 30 MAIN MENU Edit Satellites When a new satellite has been sent into orbit, or if you select anot preprogrammed satellite, you can add it to the existing sat-ellite list. To add a new satellite • Select the line “New Satellite”. • Press OK . • Enter the name of the new satellite. (How to enter a ...

GB 31 MAIN MENU View attributes Chech position and orientation for different satellites by select-ing the line “View Attributes”. Delete Satellite You can also delete an added satellite. (This is not possible for thefactory preprogrammed satellites.) If you want to delete the satellite from which yo...

GB 32 MAIN MENU TV Settings From here you can adjust settings concerning your TV. TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens.Select 16:9 for a wide screen TV. TV signal If the teletext function does not work when watching channelsfrom an ...

GB 33 MAIN MENU Receiver Upgrade In order to keep the Mediamaster up-to-date, it will be possibleto download new versions of the system software via satelliteand from the Internet. New software may include new or im-proved features for existing menus. Enter this menu to check for new software. If ne...

GB 34 MAIN MENU Parental Control To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . The following settings can be altered from this menu. Receiver lock If you select “On,” you will have to enter the access code everytime you start the Med...

GB 35 MAIN MENU System Information If you have to contact your service provider or a service center,they might ask for information available from this menu. There-fore, it is important that you first check the information in thefollowing menus. Diagnostics To find out the condition of certain parts ...

GB 36 Conditional Access This menu will only be activated if you have inserted a valid Smart-card in the slot behind the front lid. If more than one CA system is activated, select the one fromwhich you want information. The Viaccess Conditional Access (CA) System is embedded in theMediamaster. A Sma...

GB 37 Network A number of digital channels transmitted from onesource. Grouped under separate headings in the chan-nel list. Parental control A feature that allows parents to "lock" programmes thatthey consider unsuitable for children. A "locked" chan-nel or programme can only be ...

GB 38 Problem The display on the front panel doesnot light up/is not lit. No sound or picture, but the frontpanel shows the time or - - : - -. No sound or picture. No sound or picture on horizontalmodulated transponder. Bad picture/blocking error. There is no Welcome menu on thescreen after you swit...

GB 39 PROBLEM SOLVING FRONT PANEL DISPLAY Problem The remote control is not working. You see the on-screen message. Viewing card error. You have forgotten your secret PINcode. CA Module is not working. Black picture. Possible causes Battery exhausted.Remote control is incorrectlyaimed. The Mediamast...

GB 40 Transmission Standards DVB, MPEG 2 LNB / Tuner input Connector 1x F-type (LNB) RF input frequency 920-2150 MHz RF input power level -20 to -70 dBmSupply voltage 13,5 /18,5 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0,65 V pp DiSEqC Tone burst A/B orLevel 1.2 RF impe...

GB 41 Main Menu 1 TV Channels 2 Radio Channels 3 Edit Channels 4 Update Channels 5 Guide 6 System Configuration 7 User Preferences 8 System Information 9 Viaccess Embedded (9 Conditional Access) System Configuration 1 Channel Search 2 Edit Satellites 3 Antenna/Satellite Configuration 4 TV Settings 5...