Nokia 9600S - Manuals

Nokia 9600S – Manual in PDF format online.

Manuals:

Manual

Manual Nokia 9600S

Summary

Page 2 - Important Information

GB 2 Important Information Wiring the plug (UK and Eire only) The mains lead on this product is already fitted with a non-rewireable (moulded)plug incorporating a fuse, the value of which is indicated on the pin face of theplug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362fus...

Page 4 - Welcome; Rear panel

GB 4 Welcome AUDIO L R Stereo outputsfor connectionto a HiFi system TV SCART for the audio /video input ofthe TV set SAT SCART for an analoguereceiver VCR SCART for a videorecorder * LNB cables also feed the LNB with a supply voltage of 13/18 V (V/H polarisa-tion) and a 0/22 kHz signal for LNB switc...

Page 5 - Installation; Connecting the Mediamaster to the satellite dish

GB 5 Installing the satellite dish • Your satellite dish should be installed with a cable for you to connect to the Mediamaster. If you do not have this cable youwill need to buy one from a dealer (tell the dealer you need acoaxial cable and F-connectors). • Connect the cable from the satellite dish...

Page 7 - on the; Preparing the remote control

GB 7 With Video recorder Connecting to an analogue satellite receiver and a video recorder • Connect one SCART cable between the TV set and the TV SCART socket on the Mediamaster. • Connect one SCART cable between the TV SCART socket on the analogue satellite receiver and the SAT SCART socket onthe ...

Page 8 - CA module and Smart Card. Model 9600 S only; not; Switching on for the first time

GB 8 You can now plug in the mains plug of the Mediamaster to thewall socket. • Switch on your TV set. • When the Mediamaster is connected to the TV set, you will now see a welcome message on the screen. You may nowproceed to page 11 “Basic Settings”. However, we recomend that you read the other inf...

Page 9 - Remote control

GB 9 To turn the Mediamaster on/off (standby). Press once to switch to audio language/audio track(if available). Press twice to switch to Radio mode. TV To leave a menu and go back to watch a TV pro-gramme. To switch from Radio Mode to TV Mode.To toggle between terrestrial TV, VCR, analogue andthe d...

Page 10 - The Service Provider is the distributor of the programmes.; PIN Code; About the Smart Card and CA Module. Model 9600 S only

GB 10 To be able to receive pay-TV channels you will need a CA Mod-ule and a Smart Card from the Service Provider of your choice. The Service Provider is the distributor of the programmes. If you are subscribing to services from more than one ServiceProvider, you might have to change between differe...

Page 11 - Basic Settings

GB 11 Antenna configuration In order to configure your equipment (satellite dish and LNB) youwill need to use the following menus. The LNB is the receiving unit which is mounted on the satel- lite dish. For the following setup procedure you have to knowthe Local Oscillator (LO) frequency valid for y...

Page 14 - Antenna Configuration Set-Up

GB 14 Antenna alternative : Select an Antenna alternative from 1 to 8. Please note, that the parameters in the menu are prepro-grammed, but you can change any of them to suit your combi-nation. Name for the satellite: From here you can select a name for the configuration. LNB frequency : Selection i...

Page 15 - Channel Search set-up

GB 15 SMATV or IF frequency channel searchModel 9200 S only A SMATV network is commonly found in smaller block of flats.In such a network you will have access to a central antenna sys-tem. If the Mediamaster is connected to a SMATV network, select“SMATV or IF frequency search”. Pressing the OK butto...

Page 16 - Viewing TV

GB 16 Start/stop watching TV To start the Mediamaster from stand-by mode, press the but- ton, TV button or one of the number buttons on the remote con- trol. It is also possible to start by pressing the button behind the lid on the front of the Mediamaster. Put the Mediamaster into stand-by by press...

Page 20 - Settings from the Main Menu; The TV Guide and Radio Guide

GB 20 How to show the Main Menu Press the MENU button and you will get the Main Menu on the TV screen. Press the TV or EXIT button to leave the menu. Submenus from the Main Menu If you select one of the highlighted titles and press the OK but- ton, a submenu will be shown on the TV screen. From a su...

Page 22 - Select this Menu from the line “Installation” in the Main Menu.; Installation Submenus; Advanced Channel Search; : Select the satellite from which

GB 22 Antenna Configuration and Channel Search The “Antenna Configuration” line will bring you to the “AntennaConfiguration Set-up” menu. The settings for this menu are al-ready described on page 14. If you select “Channel Search”, you can choose between the“Channel Search set up” described on page ...

Page 24 - Symbols on the Mediamaster display; No TS; No Transport Stream; Err; Automatic Installation; Will start the Installation procedure from the “Welcome Menu”.

GB 24 Symbols on the Mediamaster display No TS No Transport Stream = No signal. Channel name. Signal indicator.A square means full signal. ? No function. Err Error message. UPGRADE The Mediamaster is busydownloading new software. Automatic Installation Will start the Installation procedure from the ...

Page 25 - Glossary of terms

GB 25 MPEG Moving Picture Experts Group NVOD Near Video On Demand PCR Program Clock Reference PID Package Identifier P I N c o d e P e r s o n a l I d e n t i f i c a t i o n N u m b e r. A four-digit code that is used for locking/unlocking, egwith the parental control feature. Default value is nor-...

Page 26 - Problem solvings

GB 26 Problem solvings What to do if you can’t solve the problem If you have tried all of the actions suggested above, without solving the problem, please contact your dealer. Problem The display on the front panel doesnot light up/is not lit No sound or picture Bad picture/blocking error The remote...

Page 27 - Technical Specifications

GB 27 Transmission Standards DVB, MPEG 2 LNB / Tuner input Connector 1x F-type (LNB) RF input frequency 950-2150 MHz RF input power level -20 to -70 dBmSupply voltage 13,5 /18,5 V ± 5% Max. current 400 mA, overload protected Control voltage 22 kHz, 0,65 V pp DiSEqC Tone burst A/B orLevel 1, 1-4 RF i...