Nissan 2011 Titan - Manuals

NISSAN CARES . . . Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer areour primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs. However...

0 Illustrated table of contents Air bags, seat belts and child restraints . . . . . . . . . . . . . . 0-2Exterior front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-3Exterior rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-4Passen...

1. 2nd row seat belts (P. 1-13) 2. Roof-mounted curtain side-impact androllover supplemental air bag (P. 1-45) 3. Front seat belts (P. 1-13) 4. Front-seat Active Head Restraints 5. Supplemental front-impact airbags (P. 1-45) 6. Seats (P. 1-2) 7. Occupant classification sensor(pressure sensor) (P. 1-...

1. Engine hood (P. 3-11) 2. Windshield wiper and washerswitch (P. 2-27) 3. Windshield (P. 8-19) 4. Moonroof (if so equipped) (P. 2-52) 5. Power windows (P. 2-48) 6. Door locks, keyfob, keys(P. 3-3, 3-7, 3-2) 7. Mirrors (P. 3-16) 8. Tire pressure (P. 9-12) 9. Flat tire (P. 6-2) 10. Tire chains (P. 8-...

1. Rear sliding window(if so equipped) (P. 2-51) 2. Vehicle loading (P. 9-13) 3. Tailgate/Truckbox (P. 3-22) 4. Trailer hitch/Towing(if so equipped) (P. 9-24) 5. Replacing bulbs (P. 8-29) 6. Bedside storage compartment(if so equipped) (P. 2-48) 7. Fuel-filler cap, fuelrecommendation (P. 3-12, P. 9-3...

1. DVD entertainment system(if so equipped) (P. 4-56) 2. Moonroof (if so equipped) (P. 2-52) 3. Map lights (if so equipped) (P. 2-56) 4. Sun visors (P. 3-15) 5. HomeLink 姞 (if so equipped) (P. 2-56) 6. Glove box (P. 2-42) 7. Cup holders (P. 2-45) 8. Front seats (P. 1-2) 9. Folding rear bench seat (P...

1. Vents (P. 4-13) 2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-29) 3. Steering wheel switch for audiocontrol/Bluetooth 姞 Hands-Free Phone System (if so equipped)(P. 4-54, P. 4-70) 4. Instrument brightness control (P. 2-32) 5. Driver supplemental air bag/horn(P. 1-45, P. 2-35) 6. ...

1. Battery (P. 8-14) 2. Fuse/fusible link box (P. 8-21) 3. Transmission dipstick (P. 8-11) 4. Engine oil filler cap (P. 8-9) 5. Brake fluid reservoir (P. 8-13) 6. Windshield-washer fluidreservoir (P. 8-13) 7. Air cleaner (P. 8-17) 8. Drive belt location (P. 8-16) 9. Radiator cap (P. 8-7) 10. Power s...

Warning light Name Page or Anti-lock BrakingSystem (ABS) warn-ing light 2-14 Automatic transmis-sion check warninglight 2-14 Automatic transmis-sion park warninglight (model) 2-14 or Brake warning light 2-14 Charge warninglight 2-15 Warning light Name Page Engine oil pressurelow/engine coolanttemper...

WARNING ● Do not ride in a moving vehicle whenthe seatback is reclined. This can bedangerous. The shoulder belt will notbe against your body. In an accident,you could be thrown into it and receiveneck or other serious injuries. Youcould also slide under the lap belt andreceive serious internal injur...

ARMRESTS (if so equipped) To use the armrests on the captain’s chairs (typeA, if so equipped) , pull them down to the restingposition. To use the center armrest on the bench seat (typeB, if so equipped) , pull on the tab in the center ofthe seat and fold it down to the resting position. HEAD RESTRAI...

The illustration shows the seating positionsequipped with head restraints. All of the headrestraints are adjustable. 䉱 Indicates the seating position is equipped with a head restraint. + Indicates the seating position is not equippedwith a head restraint. Components 1. Head restraint 2. Adjustment n...

To raise the head restraint, pull it up. To lower, push and hold the lock knob and pushthe head restraint down. Removal Use the following procedure to remove the ad-justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head res...

● If the head restraints are removed forany reason, they should be securelystored to prevent them from causinginjury to passengers or damage to thevehicle in case of sudden braking or anaccident. ● When returning the seatbacks to theupright position, be certain they arecompletely secured in the latc...

WARNING ● If you fold the front passenger’s seat-back flat forward to carry longer ob-jects, be sure this cargo is properly se-cured and not near an air bag. In acrash, an inflating air bag might forcethat object toward a person. This couldcause severe injury or even death. Se-cure objects away from...

䊊 3 Repeat this process to raise and secure theseat cushion on the other side of the vehiclefor maximum storage capacity. To return the rear bench seat to a seating posi-tion, reverse the process. Make sure to prop- erly push the seat cushion down into place. WARNING ● When the vehicle is being used...

WARNING Never allow anyone to ride in the cargoarea or on the rear seat when it is in thefold-down position. Use of these areas bypassengers without proper restraints could result in serious injury in an acci-dent or sudden stop. PRECAUTIONS ON SEAT BELTUSAGE If you are wearing your seat belt proper...

WARNING ● Every person who drives or rides in thisvehicle should use a seat belt at alltimes. Children should be properly re-strained in the rear seat and, if appro-priate, in a child restraint. WARNING ● The seat belt should be properly ad-justed to a snug fit. Failure to do so mayreduce the effect...

PREGNANT WOMEN NISSAN recommends that pregnant women useseat belts. The seat belt should be worn snug andalways position the lap belt as low as possiblearound the hips, not the waist. Place the shoulderbelt over your shoulder and across your chest.Never run the lap/shoulder belt over your ab-dominal...

䊊 2 Slowly pull the seat belt out of the retractorand insert the tongue into the buckle untilyou hear and feel the latch engage. ● The retractor is designed to lock dur-ing a sudden stop or on impact. Aslow pulling motion permits the seatbelt to move, and allows you somefreedom of movement in the se...

WARNING When fastening the seat belts, be certainthat the seatbacks are completely se-cured in the latched position. If they arenot completely secured, passengers maybe injured in an accident or sudden stop. Unfastening the seat belts 䊊 1 To unfasten the seat belt, press the button onthe buckle. The...

Shoulder belt height adjustment (frontoutboard seats) The shoulder belt anchor height should be ad-justed to the position best for you. (See “Precau-tions on seat belt usage” earlier in this section.)To adjust, pull out 䊊 1 the adjustment button and move the shoulder belt anchor 䊊 2 to the desired p...

Fastening the seat belts 䊊 1 Insert the tongue into the buckle until youhear and feel the latch engage. 䊊 2 Tighten the belt by pulling the free end of thebelt away from the tongue. 䊊 3 Position the lap belt low and snug on the hips as illustrated. LRS0643 LRS0644 LRS0645 1-20 Safety—Seats, seat bel...

䊊 4 Loosen the belt by holding the tongue at aright angle to the belt, then pull on the belt. Unfastening the seat belts 䊊 1 To unfasten the seat belt, press the button on the buckle. SEAT BELT EXTENDERS If, because of body size or driving position, it isnot possible to properly fit the lap/shoulder...

● Periodically check to see that the seatbelt and the metal components, such as buckles, tongues, retractors, flexible wiresand anchors, work properly. If loose parts,deterioration, cuts or other damage on thewebbing is found, the entire seat belt as-sembly should be replaced. Children need adults t...

PRECAUTIONS ON CHILDRESTRAINTS WARNING ● Failure to follow the warnings and in-structions for proper use and installa-tion of child restraints could result inserious injury or death of a child orother passengers in a sudden stop orcollision: – The child restraint must be used and installed properly....

LATCH (Lower Anchors and Tethers for CHildren) SYSTEM Your vehicle is equipped with special anchorpoints that are used with LATCH (Lower Anchorsand Tethers for CHildren) system compatiblechild restraints. This system may also be referredto as the ISOFIX or ISOFIX compatible system.With this system, ...

Top tether anchor point locations Anchor points are located under the rear windowbehind the rear bench seat. REAR-FACING CHILD RESTRAINTINSTALLATION USING LATCH Refer to all Warnings and Cautions in the “ChildSafety” and “Child Restraints” sections beforeinstalling a child restraint. Follow these st...

3. For child restraints that are equipped with webbing-mounted attachments, remove anyadditional slack from the anchor attach-ments. Press downward and rearward firmlyin the center of the child restraint with yourhand to compress the vehicle seat cushionand seatback while tightening the webbingof th...

5. Check to make sure the child restraint is properly secured prior to each use. If thechild restraint is loose, repeat steps 2through 4. REAR-FACING CHILD RESTRAINTINSTALLATION USING THE SEATBELTS WARNING The three-point seat belt with AutomaticLocking Retractor (ALR) must be usedwhen installing a ...

7. Check to make sure that the child restraint is properly secured prior to each use. If theseat belt is not locked, repeat steps 1through 6. After the child restraint is removed and the seatbelt fully retracted, the ALR mode (child restraintmode) is canceled. FORWARD-FACING CHILDRESTRAINT INSTALLAT...

4. For child restraints that are equipped with webbing-mounted attachments, remove anyadditional slack from the anchor attach-ments. Press downward and rearward firmlyin the center of the child restraint with yourknee to compress the vehicle seat cushionand seatback while tightening the webbingof th...

Refer to all Warnings and Cautions in the “ChildSafety” and “Child Restraints” sections beforeinstalling a child restraint. Follow these steps to install a forward-facingchild restraint using the vehicle seat belt in therear seats or in the front passenger seat: 1. If you must install a child restra...

FORWARD-FACING CHILDRESTRAINT INSTALLATION USINGTHE SEAT BELTS — FRONT BENCHCENTER POSITION WARNING ● Never install a rear-facing child re-straint in the front passenger seat.Front air bags inflate with great force. Arear-facing child restraint could bestruck by the front air bag in a crash andcould...

2. Position the child restraint on the seat. Al- ways follow the child restraint manufactur-er’s instructions. The back of the child restraint should besecured against the vehicle seat back. Ifnecessary, adjust or remove the head re-straint to obtain the correct child restraint fit.See “Head restrai...

5. After attaching the child restraint, test it be- fore you place the child in it. Push it from sideto side while holding the child restraint nearthe seat belt path. The child restraint shouldnot move more than 1 inch (25 mm) , fromside to side. Try to tug it forward and checkto see if the seat bel...

Before securing the child restraint with theLATCH lower anchors (rear outboard seating po-sitions only) or the seat belt, as applicable, followthese steps. 1. If necessary, raise or remove the head re- straint to position the top tether strap 䊊 1 over the top of the seatback. If the headrestraint is...

● Make sure the child’s head will be properlysupported by the booster seat or vehicleseat. The seatback must be at or above thecenter of the child’s ears. For example, if alow back booster seat 䊊 1 is chosen, the vehicle seatback must be at or above thecenter of the child’s ears. If the seatback isl...

WARNING ● Even with the NISSAN Advanced AirBag System, never install a rear-facingchild restraint in the front seat. An in-flating front air bag could seriously in-jure or kill your child. See “Child re-straints” earlier in this section fordetails. WARNING Front seat-mounted side-impact supple-menta...

The driver supplemental front-impact air bag islocated in the center of the steering wheel. Thepassenger supplemental front-impact air bag ismounted in the dashboard above the glove box.The supplemental front air bags are designed toinflate in higher severity frontal collisions, al-though they may i...

Front passenger air bag and status light WARNING The front passenger air bag is designed toautomatically turn OFF under some con-ditions. Read this section carefully tolearn how it operates. Proper use of theseat, seat belt and child restraints is nec-essary for most effective protection. Fail-ure t...

Front passenger seat adult occupants who areproperly seated and using the seat belt as out-lined in this manual should not cause the passen-ger air bag to be automatically turned OFF. Forsmall adults it may be turned OFF; however, if theoccupant takes his/her weight off the seat cush-ion (for exampl...

SUPPLEMENTAL AIR BAGWARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impactair bag, front seat-mounted side-impact supple-mental air bag, roof-mounted curtain side-impactand rollover supplemental air bag and s...

2 Instruments and controls Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-5Tachometer . . . . . . . . ....

1. Vents (P. 4-13) 2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-29) 3. Steering wheel switch for audiocontrol/Bluetooth 姞 Hands-Free Phone System (if so equipped)(P. 4-54, P. 4-70) 4. Instrument brightness control (P. 2-32) 5. Driver supplemental air bag/horn(P. 1-45, P. 2-35) 6. ...

1. Warning/indicator lights 2. Tachometer 3. Engine coolant temperature gauge 4. Voltmeter (if so equipped) 5. Fuel gauge 6. Speedometer 7. Automatic transmission fluid tempera-ture gauge (if so equipped) 8. Odometer/Twin trip odometer/VehicleInformation Display 9. Engine oil pressure gauge(if so eq...

1. Speedometer 2. Odometer/twin trip display 3. Change button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/Twin trip odometer The odometer/twin trip odometer is displayedwhen the ignition switch is placed in the ONposition. The odometer records the total dis...

TACHOMETER The tachometer indicates engine speed in revo-lutions per minute (rpm) . Do not rev the engineinto the red zone 䊊 1 . CAUTION When engine speed approaches the redzone, shift to a higher gear or reduce en-gine speed. Operating the engine in thered zone may cause serious engine damage. ENGI...

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking,turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after theignition switch is placed in the OFF position. The low fuel warning light comes on when t...

CAUTION ● This gauge is not designed to indicatelow engine oil level. Use the dipstick tocheck the oil level. (See “Engine oil” inthe “Maintenance and do-it-yourself”section.) ● If the gauge needle does not move withthe proper amount of engine oil, havethe vehicle checked by a NISSANdealer. Continue...

CAUTION ● This gauge is not designed to indicatelow automatic transmission fluid level.Use the dipstick to check the fluid level.(See “5-speed automatic transmissionfluid” in the “Maintenance and do-it-yourself” section.) ● If the gauge indicates automatic trans-mission fluid temperature over the no...

COMPASS DISPLAY Push the or button for about 1 sec- ond when the ignition switch is placed in the ONposition to toggle the compass direction display 䊊 1 on or off. The display will indicate the direction that the vehicle is heading. N: NorthE: EastS: SouthW: West If the display reads “C”, calibrate ...

Zone variation change procedure The difference between magnetic north and geo-graphical north is known as variance. In someareas, this difference can sometimes be greatenough to cause false compass readings. Followthese instructions to set the variance for yourparticular location if this happens: 1....

or Anti-lock Braking System (ABS)warning light Low fuel warning light High beam indicator light (Blue) Automatic transmission check warning light Low tire pressure warning light Malfunction indicator light (MIL) Automatic transmission park warning light( model) Master warning light (if so equipped) ...

or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ONposition, the Anti-lock Braking System (ABS)warning light illuminates and then turns off. Thisindicates the ABS is operational. If the ABS warning light illuminates while theengine is running, or while drivin...

WARNING ● Your brake system may not be workingproperly if the warning light is on. Driv-ing could be dangerous. If you judge itto be safe, drive carefully to the nearestservice station for repairs. Otherwise,have your vehicle towed because driv-ing it could be dangerous. ● Pressing the brake pedal w...

● If the gauge indicates engine coolanttemperature over the normal range,stop the vehicle as soon as safely pos-sible. If the engine is overheated, con-tinued operation of the vehicle may se-riously damage the engine. See “If yourvehicle overheats” in the “In case ofemergency” section for immediate ...

Seat belt warning light andchime The light and chime remind you to fasten yourseat belts. The light illuminates whenever theignition switch is placed in the ON or STARTposition and remains illuminated until the driver’sseat belt is fastened. At the same time, the chimesounds for about 6 seconds unle...

Front passenger air bag statuslight The front passenger air bag status light ( ) will be lit and the passenger front air bag will beOFF depending on how the right front passengerseat is being used. For front passenger air bag status light operation,see “Front passenger air bag and status light” inth...

CAUTION Continued vehicle operation without hav-ing the emission control system checkedand repaired as necessary could lead topoor driveability, reduced fuel economy,and possible damage to the emission con-trol system. Security indicator light (if soequipped) This light blinks whenever the ignition ...

Check tire pressure warning This warning appears when the low tire pressurewarning light in the meter illuminates and low tirepressure is detected. If this warning appears,stop the vehicle and adjust the tire pressure tothe recommended COLD tire pressure shown onthe Tire and Loading Information labe...

3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference)separate from the registered key. If the no start condition re-occurs, NISSAN rec-ommends placing the registered key on a sepa-rate key ring to avoid interference from otherdevices. Statem...

NOTE: If the rear power window (if so equipped) islowered while the defroster switch is on,the rear window defroster will automati-cally shut off. The heated outside mirrors (ifso equipped) will remain on. The rear win-dow defroster will automatically turn onwhen the rear power window is fully close...

CAUTION Use the headlights with the engine run-ning to avoid discharging the vehiclebattery. Autolight system (if so equipped) The autolight system allows the headlights to beset so they turn on and off automatically. Theautolight system can: ● Turn on the headlights, front parking, tail,license pla...

To turn on the autolight system: 1. Turn the headlight switch to the AUTO posi- tion 䊊 1 . 2. Place the ignition switch in the ON position. 3. The autolight system automatically turns the headlights on and off. Initially, if the ignition switch is placed in the OFFposition and a door is opened and l...

TURN SIGNAL SWITCH Turn signal 䊊 1 Move the lever up or down to signal theturning direction. When the turn is com-pleted, the turn signals cancel automatically. Lane change signal 䊊 2 To signal a lane change, move the lever up ordown to the point where the indicator lightbegins to flash, but the lev...

To sound the horn, push the center pad area ofthe steering wheel. WARNING Do not disassemble the horn. Doing socould affect proper operation of thesupplemental front air bag system. Tam-pering with the supplemental front air bagsystem may result in serious personalinjury. The front seats are warmed ...

The vehicle should be driven with the VehicleDynamic Control (VDC) system on for most driv-ing conditions.If the vehicle is stuck in mud or snow, the VDCsystem reduces the engine output to reducewheel spin. The engine speed will be reducedeven if the accelerator is depressed to the floor. Ifmaximum ...

Tow mode should be used when pulling a heavytrailer or hauling a heavy load. Driving the vehiclein the tow mode with no trailer/load or lighttrailer/light load will not cause any damage. How-ever, fuel economy may be reduced, and thetransmission/engine driving characteristics mayfeel unusual. Press ...

The power outlets are for powering electricalaccessories such as cellular telephones. The power outlets located on the driver’s side ofthe instrument panel and in the truck box arepowered directly by the vehicle’s battery. The power outlets located on the passenger’sside of the instrument panel, ins...

Do not use the outlet located in the truck box withaccessories that exceed 12 volt, 120W (15A)power draw . Do not use double adapters or morethan one electrical accessory. CAUTION For the power outlet located in the bed ofthe truck, do not use with accessories thatexceed a 12 volt, 120W (15A) power ...

Console box storage trays Console box storage Pull up on the lever 䊊 1 to open the console box lid 䊊 2 . Console box lock Use the master key to lock 䊊 1 or unlock 䊊 2 the console box. LIC1369 LIC1370 LIC1371 Instruments and controls 2-41

CENTER ARMREST STORAGE (if soequipped) To access the center armrest storage area, lowerthe center armrest and lift the lid. GLOVE BOX Open the glove box by pulling the handle. Use the master key to lock or unlock the glove boxlock (if so equipped) . The valet key cannot beused. WARNING Keep glove bo...

SUNGLASSES HOLDER (if soequipped) To open the sunglasses holder, push and release. WARNING ● Keep the sunglasses holder closedwhile driving to prevent an accident. CAUTION ● Do not use for anything other thansunglasses. ● Do not leave sunglasses in the sun-glasses holder while parking in directsunli...

SEATBACK POCKET (if so equipped) The seatback pocket is located on the back of thedriver’s seat. The pocket can be used to storemaps. OVERHEAD CONSOLE (if soequipped) Storage bins WARNING Keep storage bins closed while driving tohelp prevent injury in an accident or asudden stop. Push the button to ...

CUP HOLDERS CAUTION ● Avoid abrupt starting and braking whenthe cup holder is being used to preventspilling the drink. If the liquid is hot, itcan scald you or your passenger. ● Use only soft cups in the cup holder.Hard objects can injure you in anaccident. Position the arm on the adjustable cup hol...

CAUTION ● Do not use bottle holder for any otherobjects that could be thrown about inthe vehicle and possibly injure peopleduring sudden braking or an accident. ● Do not use bottle holder for open liquidcontainers. GROCERY HOOKS (if so equipped) The grocery hooks allow for standard size plasticgroce...

LOCKABLE BEDSIDE STORAGECOMPARTMENT (if so equipped) To access the bedside storage compartment,hold the key hole cover open and insert themaster key. Turn the key clockwise to unlock thelid. The tray inside the bedside storage compartmentis adjustable. The bedside storage compartment will automati-c...

1. Window lock button 2. Power door lock switch 3. Front passenger side automatic switch 4. Right rear passenger window switch 5. Left rear passenger window switch 6. Driver side automatic switch Driver’s side power window switch The driver’s side control panel is equipped withswitches to open or cl...

Rear power window switch The rear power window switches open or closeonly the corresponding windows. To open thewindow, push the switch and hold it down 䊊 1 . To close the window, pull the switch up 䊊 2 . Locking passengers’ windows When the window lock button is depressed, onlythe driver’s side win...

Auto-reverse function (when closing ortilting down the moonroof) The auto-reverse function can be activated whenthe moonroof is closed or tilted down by auto-matic operation when the ignition switch isplaced in the ON position or for about 45 sec-onds after the ignition switch is placed in the OFFpo...

The interior light has a three-position switch andoperates regardless of ignition switch position. When the switch is in the ON position 䊊 1 , the interior lights illuminate, regardless of door posi-tion. The lights will go off after about 15 minutesunless the ignition switch is placed in the ONposi...

When the switch is in the OFF position 䊊 3 , the interior lights do not illuminate, regardless of doorposition. The puddle lights (if so equipped) andcargo light come on when any front or rear pas-senger door is opened. The lights will turn off automatically after 15 min-utes while doors are open to...

To turn the map lights on, press the switches. Toturn them off, press the switches again. CAUTION Do not use for extended periods of timewith the engine stopped. This could resultin a discharged battery. The HomeLink 姞 Universal Transceiver provides a convenient way to consolidate the functions of u...

PROGRAMMING HOMELINK 姞 1. To begin, press and hold the two outer HomeLink 姞 buttons (to clear the memory) until the indicator light 䊊 1 blinks (after 20 seconds) . Release both buttons. 2. Position the end of the hand-held transmitter 1 - 3 inches (26 - 76 mm) away from theHomeLink 姞 surface. 3. Usi...

REPROGRAMMING A SINGLEHOMELINK 姞 BUTTON To reprogram a HomeLink 姞 Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink 姞 but- ton. Do not release the button until step 4 has been completed. 2. When the indicator light begins to flash slowly (after 20 seconds) ...

3 Pre-driving checks and adjustments Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 NISSAN vehicle immobilizer system keys(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Doors . . . . . . . . . . . . . . . . . ....

1. Two master keys (black) with transpon-der chip (if so equipped) and chromeNISSAN brand symbol on one side 2. Valet key (black) with transponder chip(if so equipped) 3. Key number plate 4. Transponder chip (if so equipped) A key number plate is supplied with your keys.Record the key number and kee...

When the doors are locked using one of thefollowing methods, the doors can not be openedusing the inside or outside door handles. Thedoors must be unlocked to open the doors. WARNING ● Always have the doors locked whiledriving. Along with the use of seat belts,this provides greater safety in the eve...

Opening and closing windows The driver’s door key operation allows you toopen and close windows equipped with auto-matic operation at the same time. ● To open the windows, turn the driver’s doorkey toward the rear of the vehicle for longer than 1 second after the door is unlocked. ● To close the win...

Lockout protection When the power door lock switch (driver’s orfront passenger’s side) is moved to the lockposition with the key in the ignition switch and anydoor open, all doors will lock and then unlockautomatically. This helps to prevent the keys frombeing accidently locked inside the vehicle. W...

Be sure to remove the key from the vehiclebefore locking the doors. The keyfob can operate at a maximum distance ofapproximately 33 ft (10 m) from the vehicle. Theeffective distance depends upon the conditionsaround the vehicle. As many as 5 keyfobs can be used with onevehicle. For information conce...

NOTE: If you change the horn beep and light flashfeature with the keyfob, the display screen(if so equipped) will not show the currentmode and cannot be used to change themode. Use the keyfob to return to the pre-vious mode and re-enable the displayscreen control. To deactivate: Press and hold the a...

● Failure to tighten the fuel-filler cap properly may cause the Mal- function Indicator Light (MIL) to illumi- nate. If the light illuminates be- cause the fuel-filler cap is loose ormissing, tighten or install the cap andcontinue to drive the vehicle. The light should turn off after a few driving t...

TILT OPERATION WARNING Do not adjust the steering wheel whiledriving. You could lose control of yourvehicle and cause an accident. Pull the lock lever forward and hold it to adjust thesteering wheel up or down to the desired posi-tion. Release the lock lever to lock the steering wheelin place. The a...

䊊 1 To block glare from the front, swing down themain sun visor. 䊊 2 To block glare from the side, remove themain sun visor from the center mount andswing the visor to the side. 䊊 3 To block glare from the side and front, swingdown the sub-sun visor (if so equipped) . 䊊 4 Slide the extension sun vis...

VANITY MIRRORS (if so equipped) To access the vanity mirror, pull the sun visordown and flip open the mirror cover (if soequipped) . Some vanity mirrors are illuminatedand turn on when the mirror cover is open. REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights...

AUTOMATIC ANTI-GLAREREARVIEW MIRROR (if so equipped) The inside mirror is designed so that it automati-cally dims during night time conditions and ac-cording to the intensity of the headlights of thevehicle following you. The automatic anti-glarefeature is activated when the ignition switch is inthe...

Pull the trailer tow mirror outward to extend it tothe desired position for better visibility while tow-ing a trailer. WARNING Do not extend or retract mirrors while driv-ing. You may lose control of your vehicleand cause an accident. CAUTION Driving in tight spaces with mirrors ex-tended may cause ...

Power folding outside mirrors (if soequipped) CAUTION Do not manually fold the power foldingmirrors. Manually folding the mirrors candamage the mirrors. Push the switch to open or close the mirrors. If one of the mirrors are manually operated orbumped, the mirror body can become loose atthe pivot po...

TAILGATE Opening the tailgate Pull the tailgate handle upward and lower thetailgate. The support cables hold the tailgateopen. When closing the tailgate, make sure the latchesare securely locked. Do not drive the vehicle with the tailgatedown, unless equipped with NISSAN’s BedExtender (accessory) or...

WARNING ● Properly secure all cargo with ropes orstraps to help prevent it from sliding orshifting. In a sudden stop or collision,unsecured cargo could cause personalinjury. The automatic drive positioner system has twofeatures: ● Memory storage function ● Entry/exit function MEMORY STORAGE FUNCTION...

The driver’s seat, accelerator and brake pedals,and outside mirrors will move to the memorizedposition with the indicator light blinking, and thenthe light will stay on for approximately 5 seconds. ENTRY/EXIT FUNCTION This system is designed so that the driver’s seatwill automatically move when the ...

Playing a digital video disc (DVD) . . . . . . . . . . . . . . . 4-60Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 4-63How to handle the DVD . . . . . . . . . . . . . . . . . . . . . . . . 4-63 Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6...

WARNING ● Positioning of the heating or air condi-tioning controls and display controlsshould not be done while driving in or-der that full attention may be given tothe driving operation. ● Do not disassemble or modify this sys-tem. If you do, it may result in accidents,fire, or electrical shock. ● ...

9. GUIDE VOICE button* 10. zoom out button* 11. zoom in button* *For Navigation system control buttons, refer tothe separate Navigation System Owner’s Manual(if so equipped) . CAUTION ● The glass screen on the liquid crystaldisplay may break if it is hit with a hardor sharp object. If the glass brea...

HOW TO USE THE TRIP BUTTON When the TRIP button is pressed, the followingmodes will display on the screen. Warning message (if any) → TRIP 1 → TRIP 2 → FUEL ECONOMY → MAINTENANCE → Audio or OFF → TRIP 1 Each trip display tracks an independent trip anddisplays the following: ● Elapsed Time - Journey ...

Resetting fuel economy The average fuel economy calculation can bereset to 0. Press the TRIP button repeatedly untilthe FUEL ECONOMY menu is shown, then ei-ther: ● Select the “Reset” key on screen by press-ing the ENTER button, or ● Press the TRIP button for more than approxi-mately 1.5 seconds. Dis...

Resetting the maintenance interval The ENGINE OIL and TIRE ROTATION mainte-nance intervals can be reset to 0 miles (kilome-ters) . Select the “Reset” key using the joystick andpress the ENTER button. Displaying the maintenance notice re-minder Select the “Display Maintenance Notification”key and pre...

Tire pressure information To display tire pressure information, press theTRIP button repeatedly until the MAINTENANCEscreen is displayed. Select the “Tire Pressure”key using the joystick and press the ENTER but-ton. Pressure indication in ** psi on the screen indi-cates that the pressure is being me...

Display settings Select the “Display” key and press the ENTERbutton. The DISPLAY SETTINGS screen will ap-pear. Brightness/contrast: Select the “Brightness/Contrast” key to adjustthe brightness and contrast of the map back-ground. Use the joystick to adjust the brightnessto darker or brighter and the...

To turn the screen on, ● Press the SETTING button and select the“Display” key and then select the “DisplayOff” key. Then set the screen to on by press-ing the ENTER button, or ● Hold the button for approximately 2 seconds and the message “resuming dis-play” will appear and the “Display Off” keywill ...

NOTE: If you change the horn beep or the lampflash feature with the keyfob, the displayscreen will not show the current mode. Usethe keyfob to return to the previous modeand re-enable the display screen control. Keyless Remote Response — Lights: Select to turn on or turn off the hazard indicator fla...

You can select the language and unit using thejoystick or pressing the ENTER button. The settings are automatically saved when youexit the menu by pressing the BACK button orany other mode button. Clock Adjusting the time: Select the “Hours” or “Minutes” key and move thejoystick to the right or left...

The GPS time (manual time) corresponding tothe selected zone will be displayed. Pacific zonehas been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if anyaudio button is pressed. Navigation settings Refer to the separate Navigation System Own-er’s Manual fo...

WARNING ● The air conditioner cooling function op-erates only when the engine is running. ● Do not leave children or adults whowould normally require the assistanceof others alone in your vehicle. Petsshould also not be left alone. Theycould accidentally injure themselves orothers through inadverten...

The air conditioner cooling function oper-ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Press the button to the OFF position. 2. Press the air flow control button. 3. Turn the fan control dial to the desired posi- tion. 4. Press the button. The in...

— Air flows mainly from the front and rear floor outlets. — Air flows from defroster outlets and the front and rear floor outlets. — Air flows mainly from defroster outlets. The air flow control dial also has intermediatepositions which allow the air flow to be distrib-uted between 2 of the icon pos...

AIR FLOW CHARTS The following charts show the button and dialpositions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional informationon heating and cooling see “Heater and air con-ditioner” in this section. The air recirculation ( ) button should always be in the OFF position for h...

1. Driver temperature control dial 2. A/C ON/OFF button 3. Front window defroster button 4. Fan speed control dial 5. System OFF button 6. Rear window defroster button 7. Air recirculation button 8. Passenger temperature control dial 9. DUAL button 10. Air flow control buttons11. AUTO button WARNING...

The sunload sensor 䊊 1 , located on the top center of the instrument panel, helps the system main-tain a constant temperature. Do not put anythingon or around this sensor. The air conditioner system in your NISSAN ve-hicle is charged with a refrigerant designed withthe environment in mind. This refr...

Reception conditions will constantly change be-cause of vehicle movement. Buildings, terrain,signal distance and interference from other ve-hicles can work against ideal reception. De-scribed below are some of the factors that canaffect your radio reception. Some cellular phones or other devices may...

AUDIO OPERATION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CDinsert slot. This could damage the CDand/or CD changer/player. ● Trying to load a CD with the CD doorclosed could damage the CD and/or CDchanger. ● Only one CD can be loaded into the CDplayer at a t...

CHECK DISC: ● Confirm that the CD is inserted cor-rectly (the label side is facing up,etc.) . ● Confirm that the CD is not bent orwarped and it is free of scratches. PRESS EJECT: This is an error due to excessive tem-perature inside the player. Remove theCD by pressing the EJECT button. Aftera short...

Playback order: Music playback order of a CD with MP3 or WMAfiles is as illustrated. ● The names of folders not containing MP3 orWMA files are not shown in the display. ● If there is a file in the top level of the disc,“Root Folder” is displayed. ● The playback order is the order in which thefiles w...

Troubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there i...

1. PRESET A·B·C button 2. CD eject button 3. MENU button 4. CD insert slot 5. CD button 6. FM·AM button 7. TUNE buttons 8. RPT button 9. PWR button/VOL control knob 10. RDM button11. Station select (1 - 6) buttons12. SEEK buttons FM/AM RADIO WITH COMPACTDISC (CD) PLAYER (if so equipped) For all oper...

To adjust Bass, Treble, Fade and Balance, pressthe MENU button until the desired mode appearsin the display. Press the SEEK button to adjustBass and Treble to the desired level. You can alsouse the SEEK button to adjust Fade and Balancemodes. Fade adjusts the sound level between thefront and rear sp...

1. SEEK/TRACK button 2. TUNE/FOLDER·CAT button 3. Display 4. SCAN button 5. RPT RDM button 6. H/M button (clock set buttons) 7. PRESET A·B·C button 8. CD button 9. FM AM button 10. SAT (satellite) radio button* 11. AUX button12. DISP button13. LOAD button14. CD insert slot15. CD eject button 16. POW...

1. SEEK/TRACK button 2. TUNE/FOLDER·CAT button 3. Display 4. SCAN RPT button 5. DISP button 6. H/M button (clock set buttons) 7. PRESET A·B·C button 8. CD·DVD button 9. RADIO button* 10. AUX button 11. REAR ON·OFF button12. speaker control button 13. LOAD button14. CD insert slot15. CD eject button ...

1. PRESET A·B·C button 2. Display 3. DISP/CLOCK button 4. SEEK/TRACK button 5. CD button 6. RADIO button* 7. AUX button 8. SCAN RPT button 9. CAT FOLDER button 10. CD LOAD button 11. CD insert slot12. CD eject button 13. PWR/VOL (power/volume) control knob 14. Station and CD select (1 - 6) buttons15...

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend thedisc. Never touch the surface of the disc. ● Always place the discs in the storage casewhen they are not being used. ● To clean a disc, wipe the surface from thecenter to the outer edge using a clean, softcloth. Do not wipe the disc usi...

1. Volume control switch 2. Phone operation switch 3. Power on and MODE select switch 4. Tuning switch STEERING WHEEL SWITCH FORAUDIO CONTROL (if so equipped) The audio system can be operated using thecontrols on the steering wheel. POWER on/off switch If you have the Type A switch, with the ignitio...

VOL (volume) button: The VOL button allows the rear passengers toadjust the headphone volume level. The vehiclevolume can also be changed if the REAR CTRL isenabled and the rear audio mode is the same asthe front. (SPEAKER CONTROL) button: Press this button to turn the rear speakers off and headphon...

1. POWER button 2. STOP button 3. NEXT TRACK/CHAPTER and PREVI-OUS TRACK/CHAPTER button 4. TITLE button 5. ENTER button 6. DISPLAY button 7. MODE button 8. SUBTITLE button 9. AUDIO button 10. ANGLE button11. CLEAR button12. PAUSE button13. PLAY button14. FAST FORWARD/FAST REVERSE button 15. MENU but...

● The screen rotates down to view and upinto the housing to store when not inuse. Ensure that the screen is latchedsecurely into the housing when stored. Headphones Power ON/OFF: Press the power button to turn the headphoneson or off. Volume control: Turn the volume control knob to adjust the vol-um...

PLAYING A DIGITAL VIDEO DISC(DVD) CAUTION ● Only operate the DVD while the vehicleengine is running. Operating the DVDfor extended periods of time with theengine OFF can discharge the vehiclebattery. ● Do not allow the system to get wet.Excessive moisture such as spilled liq-uids may cause the syste...

FF (Fast Forward) , REW (Remote control only) : Press the FAST FORWARD/FAST REVERSEbuttons to carry out the fast forward or fast re-verse presentation at 5 times normal play speed. Press the FAST FORWARD/FAST REVERSEbuttons again or PLAY button to resume thenormal play speed. NEXT CHAPTER/PREVIOUS C...

Use the “ ≥ 10” button to input numbers greater than or equal to 10. Up to three digits can beinputted when selecting the chapter/title/tracknumber. The subsequent actuation of numeric buttons willcontinuously shift the previously input number tothe “left”. The chapter/title/track number will be aut...

● A new disc may be rough on its innerand outer edges. Remove the roughedges using the side of a pen or pencilas illustrated. ● Never attempt to use a DVD that hasbeen cracked, deformed, or repairedusing adhesive. Doing so may causedamage to the equipment. ● Handle the DVD carefully to avoid contami...

Remote control and headphonesbattery replacement Replace the battery as follows: 1. Open the lid. 2. Replace batteries with new ones. ● Size AA (remote control) ● Size AAA (headphones) Make sure that the and ends on the batteries match the markings inside thecompartment. 3. Close the lid securely. I...

When installing a CB, ham radio or car phone inyour NISSAN, be sure to observe the followingprecautions; otherwise, the new equipment mayadversely affect the engine control system andother electronic parts. WARNING ● A cellular telephone should not be usedwhile driving so full attention may begiven ...

– Your cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not idealor ambient sound is too loud, it may bedifficult to hear the other person’s voice dur-ing a call. ● Do not place the cellular phone in an areasurrounded by metal or far away from thein-vehicl...

Operating tips To get the best performance out of the NISSANVoice Recognition system, observe the following: ● Keep the interior of the vehicle as quiet aspossible. Close the windows to eliminatesurrounding noises (traffic noises, vibrationsounds, etc.) , which may prevent the systemfrom recognizing...

● Numbers can be spoken in small groups.The system will prompt you to continue en-tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers andprompts you to enter more. – “six six two” The system repeats the numbers andprompts you to enter more. – “si...

PHONE/END Press the button to cancel a VR session or end a call. GETTING STARTED The following procedures will help you getstarted using the Bluetooth 姞 Hands-Free Phone System with NISSAN Voice Recognition. For ad-ditional command options, refer to “List of voicecommands” in this section. Choosing ...

4. Say: “New phone” 䊊 C . The system acknowl- edges the command and asks you to initiatepairing from the phone handset 䊊 D . The pairing procedure of the cellular phonevaries according to each cellular phonemodel. See the cellular phone Owner’sManual for details. You can also visitwww.nissanusa.com/...

For additional command options, see “List ofvoice commands” later in this section. LIST OF VOICE COMMANDS Main Menu “Call” or “Call International” “Phone Book” “Memo Pad” “Setup” When you press and release the button on the steering wheel, you can choose from thecommands on the Main Menu. The follow...

If a redial number does not exist, the systemannounces, “There is no number to redial” andends the VR session. “Call back” 䊊 D Use the Call Back command to dial the number ofthe last incoming call within the vehicle. The system acknowledges the command, re-peats the number and begins dialing. If a c...

The transfer procedure varies according to eachcellular phone. See the cellular phone Owner’sManual for details. You can also visit www.nissanusa.com/bluetooth for instructionson transferring phone numbers from NISSANrecommended cellular phones. The system repeats the number and prompts youfor the n...

“Setup” Main Menu “Setup” “Pair Phone” 䊊 A “List Phone” 䊊 B “Select Phone” 䊊 C “Change Priority” 䊊 D “Delete Phone” 䊊 E “Select Ringtone” 䊊 F “Bluetooth Off” 䊊 G Use the Setup command to change options as-sociated with the Bluetooth 姞 Hands-Free Phone System. “Pair phone” 䊊 A Use the Pair Phone comm...

For example, if the current priority levels are: Priority Level 1 = Phone APriority Level 2 = Phone BPriority Level 3 = Phone C and you change the priority level of Phone C toLevel 1, then: Priority Level 1 = Phone CPriority Level 2 = Phone BPriority Level 3 = Phone A “Delete phone” 䊊 E Use the Dele...

speaker adaptation mode or press thePHONE/END ( ) button to select a dif- ferent language.” 5. Press the button. For information on selecting a different lan-guage, see “Choosing a language” earlier inthis section. 6. Voice memory A or memory B is selected automatically. If both memory locations are...

TROUBLESHOOTING GUIDE The system should respond correctly to all voicecommands without difficulty. If problems are en-countered, try the following solutions. Where the solutions are listed by number, tryeach solution in turn, starting with number 1, untilthe problem is resolved. Symptom Solution Sys...

5 Starting and driving Precautions when starting and driving. . . . . . . . . . . . . . . . 5-2 Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . 5-2Three-way catalyst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2On-pavement and off-road drivingprecautions . . . . ....

CAUTION ● Do not use leaded gasoline. Depositsfrom leaded gasoline will seriously re-duce the three-way catalyst’s ability tohelp reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc-tions in the ignition, fuel injection, orelectrical systems can cause overrichfuel flow into the three-way...

Please note that the TPMS is not a substitute forproper tire maintenance, and it is the driver’sresponsibility to maintain correct tire pressure,even if under-inflation has not reached the level totrigger illumination of the TPMS low tire pressuretelltale. Your vehicle has also been equipped with aT...

WARNING ● If the low tire pressure warning lightilluminates while driving, avoid suddensteering maneuvers or abrupt braking,reduce vehicle speed, pull off the roadto a safe location and stop the vehicleas soon as possible. Driving with under-inflated tires may permanently damagethe tires and increas...

For Canada: This device complies with RSS-210 of In-dustry Canada. Operation is subject to thefollowing two conditions: 1. This device may not cause interfer-ence, and 2. This device must accept any interfer- ence, include interference that maycause undesired operation of the de-vice. AVOIDING COLLI...

Help prevent rapid air pressure loss by maintain-ing the correct air pressure and visually inspectthe tires for wear and damage. See “Wheels andtires” in the “Maintenance and do-it-yourself”section of this manual. If a tire rapidly loses airpressure or “blows-out” while driving, maintaincontrol of t...

Please observe the following precautions: WARNING ● Drive carefully when off the road andavoid dangerous areas. Every personwho drives or rides in this vehicleshould be seated with their seat beltfastened. This will keep you and yourpassengers in position when drivingover rough terrain. ● Do not dri...

● Do not attempt to test a 4WD equippedvehicle on a 2-wheel dynamometer(such as the dynamometers used bysome states for emissions testing) , orsimilar equipment even if the other twowheels are raised off the ground. Makesure you inform test facility personnelthat your vehicle is equipped with 4WDbef...

AUTOMATIC TRANSMISSION The ignition lock is designed so the ignitionswitch cannot be placed in the LOCK positionand the key cannot be removed until the shiftselector is moved to the P (Park) position. When removing the key from the ignition switch,make sure the shift selector is in the P (Park)posit...

KEY POSITIONS LOCK: Normal parking position (0) OFF: (Not used) (1) ACC: (Accessories) (2) This position activates electrical accessoriessuch as the radio when the engine is not running. ON: Normal operating position (3) This position turns on the ignition system and theelectrical accessories. START...

1. Apply the parking brake. 2. Move the shift selector to P (Park) or N (Neutral) . P (Park) is recommended. The shift selector cannot be moved outof P (Park) and into any of the othergear positions if the ignition switch isturned to the OFF position or if the keyis removed from the ignition switch....

R (Reverse) : CAUTION To prevent transmission damage, use theP (Park) or R (Reverse) position only whenthe vehicle is completely stopped. Use the R (Reverse) position to back up. Makesure the vehicle is completely stopped beforeselecting the R (Reverse) position. The brake pedal must be depressed to...

To move the shift selector: : Shift while depressing the brake pedal : Shift without depressing brake pedal Shifting – column After starting the engine, fully depress the brakepedal and move the shift selector out of the P(Park) position. WARNING Apply the parking brake if the shift selec-tor is in ...

Manual shift mode When the manual shift mode button 䊊 A is pressed while driving, the transmission enters themanual shift mode. Shift ranges can be selectedmanually. In the manual shift mode, the shift range is dis-played on the position indicator in the meter. Afterpressing the manual shift mode bu...

When canceling the manual shift mode: Press the manual shift mode button 䊊 A to return the transmission to the normal driving mode. ● In the manual shift mode, the transmis-sion may not shift to the selected gearimmediately because of vehicle speed.The transmission will up or down shiftwhen vehicle ...

5. Use a protective cloth on the end of a small screwdriver before inserting it in the shiftlock release slot and pushing down. 6. Move the shift selector to the N (Neutral) position while holding down the shift lockrelease. 7. For models without the NISSAN vehicle im- mobilizer system, turn the key...

To engage: Firmly depress the parking brake. To release: 1. Firmly apply the foot brake. 2. Move the shift selector to the P (Park) posi- tion. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out. 1. ACCEL/RES switch 2. COAST/SET...

CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed be-tween 25 - 89 MPH (40 - 144 km/h) withoutkeeping your foot on the accelerator pedal. To turn on the cruise control, push the ON·OFF switch on. The CRUISE indicator light inthe vehicle information display will illuminate. To se...

CAUTION During the first 1,200 miles (2,000 km) ,follow these recommendations to obtainmaximum engine performance and en-sure the future reliability and economy ofyour new vehicle. Failure to follow theserecommendations may result in short-ened engine life and reduced engineperformance. ● Avoid driv...

WARNING ● For 4WD equipped vehicles, do not at-tempt to raise two wheels off theground and shift the transmission toany drive or reverse position with theengine running. Doing so may result indrivetrain damage or unexpected ve-hicle movement which could result inserious vehicle damage or personalinj...

TRANSFER CASE SHIFTINGPROCEDURES The part time 4WD system provides 3 positions(2WD, 4H and 4LO) , so you can select the desireddrive mode according to the driving conditions. 2WD or 4WD shift procedure: 4WD Shift Switch Position Wheels Driven Indicator Light Use Conditions 4WD Shift Procedure 4WD sh...

The transfer case 4WD shift switch is used toselect either 2WD or 4WD depending on thedriving conditions. There are three types of drivemodes available, 2WD, 4H and 4LO. The 4WD shift switch electronically controls thetransfer case operation. Rotate the switch tomove between each mode, 2WD, 4H and 4...

● If it is difficult to free the vehicle, rock thevehicle back and forth between reverse anddrive gears. ● If the vehicle is stuck deep in mud, placestones or wooden blocks under the tires.Then try the recovery procedures above. Tirechains may be effective. CAUTION ● Do not spin the tires excessivel...

4WD shift indicator light The 4WD shift indicator light is located in thevehicle information display. The light should turn off within 1 second afterturning the ignition switch to the ON position. While the engine is running, the 4WD shift indi-cator light will illuminate the position selected bythe...

CAUTION ● After using the E-Lock system, turn theswitch OFF to prevent possible damageto driveline components from extendeduse. ● Do not drive the vehicle at speeds fasterthan 12 mph (20 km/h) when the systemis engaged. Doing so could damagedrivetrain components. ● Do not turn on the E-lock system w...

● HEADED DOWNHILL WITH CURB: 䊊 A Turn the wheels into the curb and move thevehicle forward until the curb side wheelgently touches the curb. ● HEADED UPHILL WITH CURB: 䊊 B Turn the wheels away from the curb andmove the vehicle back until the curb sidewheel gently touches the curb. ● HEADED UPHILL OR...

WARNING ● While driving on a slippery surface, becareful when braking, accelerating ordownshifting. Abrupt braking or accel-erating could cause the wheels to skidand result in an accident. ● If the engine is not running or is turnedoff while driving, the power assist forthe brakes will not work. Bra...

WARNING Do not pump the brake pedal. Doing somay result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electricpumps, hydraulic solenoids and a computer. Thecomputer has a built-in diagnostic feature thattests the system each time you start the engineand move...

When the VDC switch is used to turn off thesystem, the VDC system still operates to preventone drive wheel from slipping by transferringpower to a non slipping drive wheel. The SLIP indicator flashes if this occurs. All other VDCfunctions are off and the SLIP indicator will not flash. The VDC system...

FREEING A FROZEN DOOR LOCK To prevent a door lock from freezing, apply de-icer through the key hole. If the lock becomesfrozen, heat the key before inserting it into the keyhole or use the remote keyless entry keyfob (if soequipped) . ANTI-FREEZE In the winter when it is anticipated that the tem-per...

SPECIAL WINTER EQUIPMENT It is recommended that the following items becarried in the vehicle during winter: ● A scraper and stiff-bristled brush to removeice and snow from the windows and wiperblades. ● A sturdy, flat board to be placed under thejack to give it firm support. ● A shovel to dig the ve...

6 In case of emergency Flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Tire Pressure Monitoring System (TPMS). . . . . . . . . . 6-2Changing a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Jump starting . . . . . . . . . ....

TIRE PRESSURE MONITORINGSYSTEM (TPMS) This vehicle is equipped with the Tire PressureMonitoring System (TPMS) . It monitors tire pres-sure of all tires except the spare. When the lowtire pressure warning light is lit, and the CHECKTIRE PRESSURE warning appears in the vehicleinformation display, one ...

WARNING ● Make sure the parking brake is securelyapplied and the automatic transmissionis shifted into P (Park) . ● Never change tires when the vehicle ison a slope, ice or slippery areas. This ishazardous. ● Never change tires if oncoming traffic isclose to your vehicle. Wait for profes-sional road...

2. Unscrew and remove the jack and tool kit. 3. Assemble the two pieces of the jack rod. Find the oval-shaped opening above themiddle of the license plate. Pass theT-shaped end of the jack rod through theopening and direct it toward the spare tirewinch, located directly above the spare tire. CAUTION...

CAUTION Be sure to center the spare tire suspend-ing plate on the wheel and then lift thespare tire. Jacking up vehicle and removing thedamaged tire WARNING ● Never get under the vehicle while it issupported only by the jack. If it is nec-essary to work under the vehicle, sup-port it with safety sta...

Installing the spare tire The spare tire is designed for emergencyuse. See specific instructions under theheading “Wheels and tires” in the “Mainte-nance and do-it-yourself” section of thismanual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire ...

WARNING ● Always make sure that the spare tireand jacking equipment are properly se-cured after use. Such items can becomedangerous projectiles in an accident orsudden stop. ● The spare tire is designed for emer-gency use. See specific instructions un-der the heading “Wheels and tires” inthe “Mainte...

WARNING Always follow the instructions below.Failure to do so could result in damage tothe charging system and cause personalinjury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat-teries near each other. Do not allow the two vehicles to touch. 2. Apply ...

WARNING Do not push start this vehicle. The three-way catalyst may be damaged. CAUTION Automatic transmission models cannotbe push-started or tow-started. Attempt-ing to do so may cause transmissiondamage. WARNING ● Do not continue to drive if your vehicleoverheats. Doing so could cause enginedamage...

6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tankwith the engine running. Add coolant to theengine coolant reservoir tank if necessary.Have your vehicle repaired at a NISSANdealer. When towing your vehicle, all State (Provincial inCanada) and local regula...

TOWING RECOMMENDED BYNISSAN Two-wheel drive models NISSAN recommends that your vehicle be towedwith the driving (rear) wheels off the ground orplace the vehicle on a flat bed truck as illustrated. CAUTION ● Never tow automatic transmission models with the rear wheels on theground or four wheels on t...

Four-wheel drive models NISSAN recommends that towing dollies beused when towing your vehicle or place the ve-hicle on a flat bed truck as illustrated. CAUTION Never tow 4WD models with any of thewheels on the ground as this may causeserious and expensive damage to thetransfer case and transmission....

● Attach recovery devices only to mainstructural members of the vehicle or therecovery hooks. ● Do not use the vehicle tie-downs to towor free a stuck vehicle. ● Only use devices specifically designedfor vehicle recovery and follow themanufacturer’s instructions. ● Always pull the recovery device st...

7 Appearance and care Cleaning exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Removing sp...

In order to maintain the appearance of your ve-hicle, it is important to take proper care of it. To protect the paint surfaces, please wash yourvehicle as soon as you can: ● after a rainfall to prevent possible damagefrom acid rain. ● after driving on coastal roads. ● when contaminants such as soot,...

Occasionally remove loose dust from the interiortrim, plastic parts and seats using a vacuumcleaner or soft bristled brush. Wipe the vinyl andleather surfaces with a clean, soft cloth damp-ened in mild soap solution, then wipe clean with adry, soft cloth. Regular care and cleaning is required in ord...

Floor mat positioning aid This vehicle includes two driver’s side front floormat brackets and one passenger’s side front floormat bracket to help keep your floor mats in place.Genuine NISSAN floor mats have been speciallydesigned for your vehicle model. The driver’s sidefloor mat has two grommet hol...

Your NISSAN has been designed to have mini-mum maintenance requirements with long ser-vice intervals to save you both time and money.However, some day-to-day and regular mainte-nance is essential to maintain your NISSAN’sgood mechanical condition, as well as its emis-sions and engine performance. It...

When driving in areas using road salt or othercorrosive materials, check lubrication frequently. Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, taillights, turn signal lights, and other lights are alloperating properly and installed securely. Alsocheck h...

Steering wheel Check for changes in the steer- ing system, such as excessive freeplay, hardsteering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly. Windshield wiper and washer* Check that the wipers and washer operate properly and thatthe ...

When performing any inspection or maintenancework on your vehicle, always take care to preventserious accidental injury to yourself or damage tothe vehicle. The following are general precau-tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap-ply the parking brak...

The engine cooling system is filled at the factorywith a pre-diluted mixture of 50% GenuineNISSAN Long Life Antifreeze/Coolant (blue) and50% water to provide year-round anti-freeze andcoolant protection. The antifreeze solution con-tains rust and corrosion inhibitors. Additional en-gine cooling syst...

CHECKING ENGINE COOLANTLEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If thereservoir is empty, check the coolant level in theradiator when the engine is cold. If there is insufficient coolant in the ...

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn off the engine. Wait more than 10 minutes for the oil to drain back intothe oil pan. 4. Remove the dipstick and wipe it cl...

CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap 䊊 A by turning it counterclockwise. 4. Place a large drain pan under the drain plug 䊊 B ....

CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. Turn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise. Thenremove the oil filter by turning it ...

The fluid level should be checked using the HOTMAX range on the power steering fluid reservoirat fluid temperatures of 122° - 176°F (50° -80°C) or using the COLD MAX range on thepower steering fluid reservoir at fluid tempera-tures of 32° - 86°F (0° - 30°C) . If the fluid is at or below the MIN line...

BRAKE FLUID Check the brake fluid level in the reservoir. If thefluid level is below the MIN line or the brakewarning light comes on, add Genuine NISSANSuper Heavy Duty Brake Fluid or equivalent DOT 3 fluid up to the MAX line. If fluid must be added frequently, the system should be checked by aNISSA...

● Keep the battery surface clean and dry.Clean the battery with a solution of bakingsoda and water. ● Make certain the terminal connections areclean and securely tightened. ● If the vehicle is not to be used for 30 days orlonger, disconnect the negative (-) batteryterminal cable to prevent discharge...

The current sensor 䊊 A is located near the battery along the negative battery cable. If you add elec-trical accessories to your vehicle, be sure toground them to a suitable body ground such asthe frame or engine block area. 1. Power steering fluid pump 2. Automatic belt tensioner 3. Water pump 4. Co...

REPLACING SPARK PLUGS Platinum-tipped spark plugs It is not necessary to replace platinum-tipped 䊊 A spark plugs as frequently as conventional typespark plugs because they last much longer. Fol-low the maintenance log shown in the “NISSANService and Maintenance Guide”. Do not serviceplatinum-tipped ...

NOTE: After installing a new air cleaner, makesure the air cleaner cover is seated in thehousing and latch the clips. WARNING ● Operating the engine with the air cleaner removed can cause you or oth-ers to be burned. The air cleaner notonly cleans the air, it stops the flame ifthe engine backfires. ...

2. Remove the filter cover bolt and remove the filter cover. NOTE: The filters are marked with air flow arrows.The end of the filter with the arrow shouldface the rear of the vehicle. The arrowsshould face downward. 3. Insert the first filter into the housing and slide it over to the right. Insert t...

REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 䊊 2 Push the release tab, then move the wiperblade down the wiper arm to remove. 䊊 3 Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place. 5. Rotate wip...

If the brakes do not operate properly, have thebrakes checked by a NISSAN dealer. Self-adjusting brakes Your vehicle is equipped with self-adjustingbrakes. The front and rear disc-type brakes self-adjustevery time the brake pedal is applied. WARNING See a NISSAN dealer for a brake systemcheck if the...

If a type A fuse is used to replace a type B fuse,the type A fuse will not be level with the fusepocket as shown in the illustration. This will notaffect the performance of the fuse. Make sure thefuse is installed in the fuse box securely. Type B fuses cannot be installed in the under-hood fuse boxe...

5. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 6. Push the fuse box cover to install. 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSANdealer. CAUTION Be careful not to allow children to swallowthe battery or removed parts. Type A WD...

FCC Notice:Changes or modifications not expressly ap-proved by the party responsible for compli-ance could void the user’s authority to op-erate the equipment. This device complies with Part 15 of theFCC Rules and RSS-210 of Industry Canada. Operation is subject to the following twoconditions: (1) T...

EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight assembly High 65 9005 (HB3) Low 55 9006 (HB4) Park/Turn 28/8 3457K Sidemarker 3.8 194 Side turn signal light* (if so equipped) — LED Front fog light (if so equipped) 27.5 880 Puddle light (if so equipped) 9 906LF Room/map lights (front...

1. Room/map light (if so equipped) 2. Personal lights (if so equipped) 3. Step light (if so equipped) 4. Puddle light/Side turn signal light (if soequipped) 5. High-mount stoplight/cargo lights 6. License plate light 7. Rear combination/tailgate light (if soequipped) assembly 8. Fog light (if so equ...

Use a cloth 䊊 1 to protect the housing. If you have a flat tire, see “Flat tire” in the“In case of emergency” section of thismanual. Puddle light (If so equipped) LDI0388 License plate light WDI0411 Rear combination light LDI0410 WHEELS AND TIRES Maintenance and do-it-yourself 8-31

TIRE PRESSURETire Pressure Monitoring System(TPMS) This vehicle is equipped with the TirePressure Monitoring System (TPMS) . Itmonitors tire pressure of all 4 tires exceptthe spare. When the low tire pressurewarning light is lit and the CHECK TIREPRESSURE warning appears in the ve-hicle information ...

Tire and loading information label 䊊 1 Seating capacity: The maximum num-ber of occupants that can be seatedin the vehicle. 䊊 2 Vehicle load limit: See loading infor-mation in the “Technical and con-sumer information” section. 䊊 3 Original tire size: The size of the tiresoriginally installed on the ...

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press toohard or force the valve stem side-ways, or air will escape. If the hissingsound of air escaping from the tire isheard while checking the pressure,reposition th...

TIRE LABELING Federal law requires tire manufacturers toplace standardized information on thesidewall of all tires. This information iden-tifies and describes the fundamentalcharacteristics of the tire and also pro-vides the tire identification number (TIN)for safety standard certification. The TINc...

䊊 7 The word “radial” The word “radial” is shown if the tire hasradial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related Terminology In addition to the many terms that aredefined throughout this section, IntendedOutboard Sidewall is (1) the sidewall th...

Generally, snow tires have lower speed ratingsthan factory equipped tires and may not matchthe potential maximum vehicle speed. Never ex-ceed the maximum speed rating of the tire. If you install snow tires, they must be the samesize, brand, construction and tread pattern on allfour wheels. For addit...

Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tight-ened to specifications at all times. Itis recommended that wheel nuts betightened to specification at eachtire rotation interval. WARNING ● After rotating the tires, check andadjust the tire pressure. ● Retighten the w...

Replacing wheels and tires When replacing a tire, use the same size, treaddesign, speed rating and load carrying capacityas originally equipped. Recommended types andsizes are shown in “Wheels and tires” in the“Technical and consumer information” section ofthis manual. WARNING ● The use of tires oth...

9 Technical and consumer information Capacities and recommended fuel/lubricants . . . . . . . . . 9-2 Fuel recommendation(without Flexible Fuel Vehicle option). . . . . . . . . . . . . . 9-3Flexible fuel vehicle (FFV) fuelrecommendation (if so equipped) . . . . . . . . . . . . . . . . . 9-4Engine oi...

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the proceduredescribed in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure...

FUEL RECOMMENDATION (withoutFlexible Fuel Vehicle option) Use unleaded regular gasoline with an octanerating of at least 87 AKI (Anti-Knock Index) num-ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler doorlabel can operate on E-85. Fuel systemor other damage can occur if...

Take care not to spill gasoline during refu-eling. Gasoline containing oxygenates cancause paint damage. E–85 fuel E-85 fuel is a mixture of approximately 85% fuelethanol and 15% unleaded gasoline. E-85 canonly be used in a Flexible Fuel Vehicle (FFV) . Donot use E-85 in your vehicle. U.S. governmen...

General information This information is for Flexible Fuel vehicles (FFV)only. FFV vehicles can be identified by the fuelfiller door label that states Ethanol (E-85) orUnleaded Gasoline Only. This section only cov-ers those subjects that are unique to Flexible Fuelvehicles. CAUTION Only vehicles with...

Your engine was filled with a high-quality engineoil when it was built. You do not have to changethe oil before the first recommended changeinterval. Oil and filter change intervals dependupon how you use your vehicle. Operation under the following conditions mayrequire more frequent oil and filter ...

ENGINE Model VK56DE Type Gasoline, 4-cycle, DOHC Cylinder arrangement 8-cylinder, V-block, Slanted at 90° Bore x Stroke in (mm) 3.858 x 3.622 (98 x 92) Displacement cu in (cm 3 ) 338.78 (5,552) Firing order 1–8–7–3–6–5–4–2 Idle speed No adjustment is necessary. A/T (in “N” position) Ignition timing ...

WHEELS AND TIRES Wheels 18 x 8.0J 20 x 8.0J Tires P265/70R18 P275/70R18 P275/60R20 Spare tire Full size DIMENSIONS AND WEIGHTS Overall length Short wheel base (SWB) in (mm) 224.6 (5,704) Long wheel base (LWB) in (mm) 244.3 (6,204) Overall width in (mm) 79.5 (2,019) Overall height 2WD KC in (mm) 75.1...

When planning to drive your NISSAN ve-hicle in another country, you should first find out if the fuel available is suitable for your vehi-cle’s engine. Using fuel with an octane rating that is too lowmay cause engine damage. All gasoline vehiclesmust be operated with unleaded gasoline. There-fore, a...

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F.M.V.S.S./C.M.V.S.S.CERTIFICATION LABEL The Federal/Canadian Motor Vehicle SafetyStandard (F.M.V.S.S./C.M.V.S.S.) certification la-bel is affixed as shown. This label contains valu-able vehicle information, such as: Gross VehicleWei...

TIRE AND LOADING INFORMATIONLABEL The cold tire pressure is shown on the Tire andLoading Information label. The label is located asshown. AIR CONDITIONER SPECIFICATIONLABEL The air conditioner specification label is affixed tothe underside of the hood as shown. Use the following steps to mount the f...

WARNING ● It is extremely dangerous to ridein a cargo area inside a vehicle. Ina collision, people riding in theseareas are more likely to be seri-ously injured or killed. ● Do not allow people to ride in anyarea of your vehicle that is notequipped with seats and seatbelts. ● Be sure everyone in you...

Steps for determining correct loadlimit 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXXlbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will beriding in your vehicle. 3. Subtract the combined weigh...

WARNING ● Properly secure all cargo with ropes orstraps to help prevent it from sliding orshifting. Do not place cargo higher thanthe seatbacks. In a sudden stop or col-lision, unsecured cargo could causepersonal injury. ● Do not load your vehicle any heavierthan the GVWR or the maximum frontand rea...

5. There should be no gap between the bottom of the cleat and the top of the channel.Tighten the center bolt hand tight (20-40inch pounds) . WTI0124 9-18 Technical and consumer information

WARNING Do not install accessories over the gapbetween the front and rear side channels.Doing this could affect the rear structurein certain rear impacts, which could resultin serious injury. CAUTION Properly secure all cargo with ropes orstraps to prevent it from sliding or shifting.Use the channel...

Install the channels end stoppers as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properlystore the channel protectors. 2. Loosen the bolt on the center of the end stopper with the provided wrench and insertit into the channel. 3. Position the end stopper ...

CREW CAB MODELS Crew Cab short wheel base models shouldnot be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properlyinstall a slide-in camper and is based on theNational Highway Traffic Safety Administrationregulations. It is recommended that, before in-sta...

When the truck is used to carry a slide-in camper,the total cargo load of the truck consists of thecamper manufacturer’s weight figure, plus: ● the weight of installed additional camperequipment not included in the campermanufacturer’s weight figure, ● the weight of camper cargo, ● and the weight of...

WARNING Overloading or improper loading of atrailer and its cargo can adversely affectvehicle handling, braking and perfor-mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy loadfor the first 500 miles (800 km) . Yourengine, axle or other parts could bedamaged. ● For the...

Temperature conditions can also affect towing.For example, towing a heavy trailer in high outsidetemperatures on graded roads can affect engineperformance and cause overheating. The engineprotection mode, which helps reduce the chanceof engine damage, could activate and automati-cally decrease engin...

TOWING LOAD/SPECIFICATION Towing load specification chart with tow package — short wheel base 2WD 4WD KC CC KC CC SV SV SL SV Pro-4X SV Pro-4X SL Maximum Towing Capacity *1, *2, *3 9,500 lb. (4,309 kg) 9,400 lb. (4,263 kg) 9,200 lb. (4,173 kg) 9,400 lb. (4,263 kg) 9,300 lb. (4,218 kg) 9,300 lb. (4,2...

TOWING SAFETYTrailer hitch Your vehicle may be equipped with an optionaltrailer tow package. The trailer tow package in-cludes a receiver-type frame mounted hitch. Thishitch is rated for the maximum towing capacity ofthis vehicle when the proper towing equipment isused. Choose a proper ball mount an...

Bumper towing The genuine NISSAN step bumper has provi-sions to install a trailer hitch ball and is designedto tow trailers of a maximum weight of 5,000 lb(2,268 kg) . To install a trailer hitch ball cut out the circle in thecenter of the step bumper 䊊 A , then remove it to install the trailer hitch...

Sway control device Sudden maneuvers, wind gusts, and buffetingcaused by other vehicles can affect trailer han-dling. Sway control devices may be used to helpcontrol these affects. If you choose to use one,contact a reputable trailer hitch supplier to makesure the sway control device will work with ...

● Regularly check that all trailer hitchmounting bolts are securely mounted. ● When towing with the hitch ball mounted to the rear bumper, do notmake sharp turns. The trailer may con-tact the bumper and cause damage tothe bumper or trailer. ● When towing a 5th wheel trailer, do notmake sharp turns w...

Electric Trailer Brakes - Electric braking sys- tems are activated by an electronic signal sentfrom a trailer brake controller (special brake-sensing module) . If electric trailer brakes areused, see ⬙ Electric trailer brake controller ⬙ in this section. Have a professional supplier of towing equip-...

4. Peel off the tape and connect the jumper harness to the connector 䊊 2 . 5. Release the parking brake. 6. Install the aftermarket electric trailer brake controller according to the manufacturer’sinstructions. Pre-towing tips ● Be certain your vehicle maintains a levelposition when a loaded and/or ...

Always block the wheels on both vehicle andtrailer when parking. Parking on a slope is notrecommended; however, if you must do so: CAUTION If you move the shift selector to the P(Park) position before blocking the wheels and applying the parking brake,transmission damage could occur. 1. Apply and ho...

Do the following if the trailer begins to sway: 1. Take your foot off the accelerator pedal to allow the vehicle to coast and steer as straightahead as the road conditions allow. This com-bination will help stabilize the vehicle – Do not correct trailer sway by steering or applying the brakes. 2. Wh...

FLAT TOWING Towing your vehicle with all four wheels on theground is sometimes called flat towing. Thismethod is sometimes used when towing a vehiclebehind a recreational vehicle, such as a motorhome. CAUTION ● Failure to follow these guidelines canresult in severe transmission damage. ● Whenever fl...

WARNING The traction grade assigned to this tire isbased on straight-ahead braking tractiontests, and does not include acceleration,cornering, hydroplaning, or peak tractioncharacteristics. Temperature A, B and C The temperature grades are A (the highest) , B,and C, representing the tire’s resistanc...

For USA If you believe that your vehicle has a de-fect which could cause a crash or couldcause injury or death, you should immedi-ately inform the National Highway TrafficSafety Administration (NHTSA) in addi-tion to notifying NISSAN. If NHTSA receives similar complaints, itmay open an investigation...

RECOMMENDED FUEL (withoutFlexible Fuel Vehicle [FFV] option): Use unleaded regular gasoline with an octanerating of at least 87 AKI (Anti-Knock Index) num-ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler doorlabel can operate on E-85. Fuel systemor other damage can occu...

® 2011 T I TA N OWN E R’S MAN UAL For your s afet y, read carefully and keep in this vehicle. 2011 NIS S AN TIT AN A6 0-D Printing : July 2010 (16) Publication No.: O M1E 0A6 0U0 Printed in U .S.A. A60-D