Nilfisk E 130.2 - Manuals

Nilfisk E 130.2 – Manual in PDF format online.

Manuals:

Manual Nilfisk E 130.2

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19

Summary

Page 4 - Description

4 Extension cables should be of a watertight construction and comply with the below-men-tioned requirements for length and cable dimensions. 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m Cable connections should be kept dry and off the ground. Mains power connection The following should be...

Page 5 - washer

5 2.2 Operation elements and model survey See illustration at the end of this manual. 1 Start/stop switch 2 Water inlet (with fi lter) 3 High pressure connection (only models without hose reel) 4 High pressure hose 5 Electric cable 6 Click & Clean spray lance 7 Spray gun with lock 8 Click & ...

Page 6 - Operating your pressure washer

6 3.3 Mounting of quick coupling 1. Screw the quick coupling (16) tight on to the water inlet (2). Note: The inlet fi lter must al- ways be fi tted in the water inlet pipe to fi lter out sand, lime stone and other impurities as these will damage the pump valves. Caution: Failure to fi t the fi lter ...

Nilfisk Manuals