Page 6 - play the track in random order in the current folder.
Press the V.UP(+) or V.DN(-) button to select and enter the number on the flashing digit from 1 to 9. Then press the SEL button to confirm the entered number and the 0 on the units place digit will be flashing. Press the V.UP(+) or V.DN(-) button to select and enter the number on the flashing digit ...
Page 7 - LOUDNESS BUTTON
In radio mode, press the ST briefly to select stereo or mono sound mode. 22. CLOCK BUTTON Press the CLK button briefly to display time for 5 seconds on the display, and then returns to its previous display unless the button is pressed again. Then press the CLK button and hold for more than 1 seconds...
Page 8 - INSTALLATION METHOD; This is an anti-theft installation method.; N O T E
INSTALLATION METHOD This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE. Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements of this Instruction Manual, then install the metal mounting sleeve into the car as p...
Page 9 - TROUBLE SHOOTING; Before using the check list please make all the connections first.
Cleaning the CD: Before playing a CD, wipe it off with a clean, dust-free cleaning cloth. Wipe the disc in the direction of the arrow. Always insert the CD with the label side facing upwards. If the CD is inserted with the printed side facing downwards, the device may be damaged. Note: If there is a...
Page 10 - your local customer service representative.
If you still have questions after going through the checklist, please consult your local customer service representative. E 9
Page 11 - SPECIFICATION
SPECIFICATION GENERAL Supply Voltage DC 14.4V. Negative Ground Current Consumption Max.15A Power Output 40Watts X 4ch. Number of channels 2 STEREO channels. Unit Dimensions 178[W] X 165[D] X 50[H] mm. FM SECTION Frequency range 87.5MHz -107.9MHz Effective sensitivity 3uV. I.F Frequency 10.7MHz. AM S...
Page 13 - EMPLACEMENT ET FONCTION DES COMMANDES; sélectionnés
EMPLACEMENT ET FONCTION DES COMMANDES 1 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 6 2 22 23 24 - + INT SEL TOP 1 2 SCN MODE RDM 4 RPT 3 A.P 5 6 ST M U LUD BND REL CLK EJECT COMPACT DIG ITAL AUDIO 1. TOUCHE REL Pour retirer le panneau avant du boîtier principal, appuyez sur la touche REL. 2. 3....
Page 18 - SCHEMA DE CABLAGE
SCHEMA DE CABLAGE - - - - B l e u - A n te n n e a u to m a ti q u e 1. Utilisez un haut-parleur chargé d’une impédance de 4 ohm. 2. Assurez-vous que le câble d’antenne automobile et le câble de mise à terre ne se touchent pas. F 7
Page 19 - REMARQUE
METHODE D’INSTALLATION Ceci est une méthode d’installation anti-vols. L’appareil principal porte UN MANCHON METALLIQUE DE MONTAGE. Veuillez raccorder les câbles, c’est-à-dire l’alimentation, les haut-parleurs et l’antenne selon les indications du manuel d’instructions, puis installez le manchon méta...
Page 21 - DEPANNAGE; Symptôme Cause; Le volume est trop bas.
DEPANNAGE Avant d’utiliser cette liste, vérifiez d’abord tous les raccords. Si vous avez encore des questions après avoir lu cette liste, veuillez consulter votre service après-vente local. Symptôme Cause Remède Il n’y a pas de contact. Si l’alimentation est correctement raccordée à l’accessoire de ...
Page 22 - CARACTERISTIQUES
CARACTERISTIQUES GENERAL Alimentation Mise à terre négative en CC de 14.4 V. Consommation Max.15 A Puissance de sortie 40 Watts X 4 ch. Nombre de voies 2 voies STEREO. Dimensions de l’appareil 178[L] X 165[P] X 50[H] mm. SECTION FM Bande passante 87,5 MHz à 107,9 MHz Sensibilité effective 3 uV. Fréq...