Newcon Optik NVS 7 - Manuals

Page 2 - IMPORTANT INFORMATION; From USA only

IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted. • NEVER disassemble the unit. This device contains high voltage, which may be hazard...

Page 3 - NEWCON OPTIK; warrants this product against defects in; NEWCON; is not responsible for warranty service

7. WARRANTY: NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing. Longer warranty periods are available, subject to the terms of specific sales...

Page 4 - The device does not work.; Bring the inspected object to the center of the image. Rotate the; Unit flashes

Precautions NVS 7 is a sophisticated precise optical instrument equipped with electronics. Therefore, it should be handled with due care. • Try to avoid strong heat, direct sunlight, impacts, dust, moisture and sudden changes of temperatures. Keep in mind that, although being very durable, NVS7 cont...

Page 6 - Figure 7; NVS 7 is supplied with the following components

Figure 7 1 – locking screw; 2 – flip/flop button; 3 – flip-flop adjusting screws; 4 – mount binding screw 1 2 3 4 2. COMPONENTS NVS 7 is supplied with the following components : PART QUANTITY NVS 7 unit with 1x lens * 1 Head gear* 1 Lens caps 1 Manual 1 Warranty registration card 1 Optional parts **...

Page 7 - Figure 5; NVS 7 with 4x lens; Figure 6; NVS 7 with 8x lens; SPECIFICATIONS OF NVS 7

OPERATION: During daytime: It is allowed to turn on the goggles at daytime for a short period of time, for testing purposes only. Lens cap must be installed during this operation. The image will be fuzzy, and/or you will see 3 images. This is normal because of the catadioptric construction of the le...

Page 8 - Installation and operation of optional lenses; The following procedure is identical for 4x or 8x lenses . Unpack; Figure 4

Main tube parameters Image Intensifier Type (Generation/Grade) 2+ / SD, HD, XT 3 / HD Photocathode operating diameter, mm 18 Photocathode type S-25 GaAs Photocathode sensitivity, min: Integral, µ A/ lm 500-750 1200-2100 Spectral at λ = 850 nm, mA/W 35 45 Light amplification 25,000 Image magnificatio...

Page 9 - Operation at night; The I/R illuminator is visible to anybody with a night; Figure 1

9 8 5.3 Operation at night You can use the device with the head gear or without it. When used with the head gear, first adjust all the straps for individual head size. Take off the lens covers (6) from the lens (7). Turn on the device-using switch (1). In case of insufficient lighting when observing...

Page 10 - OPERATION INSTRUCTIONS; Figure 3

5. OPERATION INSTRUCTIONS 5.1 Pre-starting procedures: Unpack the device. In order to install the battery, first make sure the switch (1) is in the OFF position. Unscrew the battery house cover (5), and install 2 fresh AA batteries. Observe the correct polarity indicated on the housing. Screw the ba...