Newcon Optik LAM 10M IR - Manuals

5 LAM consists of an emitter (6,7, Fig.1), a battery compartment (15,16, Fig.1), windage (9, Fig.1) and elevation (12, Fig.1) adjustment mechanisms, an operating modes switch (17, Fig.1), a remote switch (Fig.2), a clamp (1, Fig.1). A battery is to be inserted into the battery compartment (16, Fig.1...

8 3. DELIVERY SET 3.1. Standard delivery set LAM is supplied in the following assembly: Quantity, pcs LAM 10M IR 1 Remote switch 1 Velcro tape 2 O-Ring 1 Case 1 Manual 1 Battery CR123 1 3.2. Optional parts LAM can be supplied with a barrel mount.

10 5. OPERATION INSTRUCTIONS 5.1. Installing the battery LAM is powered by a standard Lithium CR123 3V battery. To install a battery: - unscrew the battery compartment cap (15, Fig.1), - insert a battery observing the polarity as marked on the battery compartment, - check the condition of the O-ring...

11 5.3. Connecting the remote control To connect the remote switch (Fig.2): - unscrew the cap of the remote connector (4, Fig.1) and store it in a safe place, - plug in the remote connector contact (3, Fig.2) observing the key visible on the cable side, - tighten the union nut, - attach the remote s...

13 6. Maintenance, storage and transportation 6.1. General LAM is a sophisticated precise optical instrument equipped with electronics. Therefore, it should be handled with due care. - Never disassemble LAM. - Keep away from direct sunlight, impacts, dust, moisture, and sharp changes of temperature....

14 6.2. Storage To set LAM from combat position into a stowed one: - turn LAM off (operating modes switch (17, Fig.1) should be set to OFF position); - cover emitter tube output window with protective cap (8, Fig.1); - disconnect remote switch (Fig.2) from the weapon, loosen screw caps (13, Fig.1), ...

15 To apply new layer of lubricant: - Within two hours from cleaning apply an even 0.2-0.5 mm thick layer of lubricant on metal surfaces with a brush. - Do not cover plastic parts. When preparing for a long-term storage LAM just received from manufacturer or from workshop, ensure that actual set is ...

18 8. WARRANTY NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase. Should your Newcon product prove defective during this period, please bring the product securely packaged in its original container or...

19 9. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at +1(416) 663-6963 or toll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, ...

20 10. QUALITY CERTIFICATE LAM10M IR serial number: ________________________________________________ complies with all technical specifications and has passed the quality inspection. Date of production: _________________________________ Quality Inspector: __________________________________ Quality A...