NewAir AC14000E - Manuals - manualsarea.com

Page 2 - BEFORE USE; GENERAL SAFETY INSTRUCTIONS:

BEFORE USE GENERAL SAFETY INSTRUCTIONS: • ALWAYS OPERATE THE UNIT IN AN UPRIGHT POSITION AND PLACE IT ON A FLAT, LEVEL SURFACE AT LEAST 14” (36 CM) FROM ANY OBJECTS OR COMBUSTIBLE SURFACES (FIG 1 & 4). • DO NOT PLACE OBJECTS ON THE UNIT, AND DO NOT COVER OR OBSTRUCT THE INLET OR OUTLET GRILLS (F...

Page 3 - PARTS LIST; filters

PARTS LIST Front: Back: 1. Control panel 2. Louvers 3. Carrying handle 4. Casters 5. Air filters 6. Air inlets 7. Exhaust air outlet 8. Cord wrap 9. Rubber plug / drainage hole Accessories: 10. Hose adapter (goes over the exhaust hose and into the back of the unit) 11. Exhaust hose 12. Round connect...

Page 4 - INSTALLATION INSTRUCTIONS; Installing the Exhaust Hose and Window Kit:; is not in use, cover the hole with the provided exhaust cap.

INSTALLATION INSTRUCTIONS Installing the Exhaust Hose and Window Kit: The unit is a portable air conditioner that may be moved from room to room. Hot air must be exhausted out of the room for the appliance to work. This can be done with the included window kit or by cutting a hole into a wall. 1. Ve...

Page 7 - OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS Control Panel: FIG.13 1. ON/OFF (power) button 2. Full water tank indicator 3. Fan mode indicator 4. Mode selection button 5. Heater indicator (AC-14000H only) 6. 7. Swing button 8. Sleep mode indicator 9. Sleep mode button 10. Temperature decrease button 11. Temperature displ...

Page 8 - Turning the Unit On and Off; F, the unit will work in cooling mode. If the temperature; Setting the Temperature:; Press the “Up” or “Down” button to change the set temperature.

7 Turning the Unit On and Off 1. Press the ON/OFF button. The unit will automatically begin operating. If the ambient temperature is higher than 74 o F, the unit will work in cooling mode. If the temperature is at or below 74 o F, the unit will work in ventilation (fan) mode. 2. At this time, the in...

Page 11 - DRAINING THE UNIT; Turn off the air conditioner and unplug

DRAINING THE UNIT During the cooling process, some water will be extracted from the air and stored within the unit’s water reservoir. If the water reservoir is full, both the compressor and motor will stop and the unit will beep (press any button to stop the beeping sound). The full water tank indic...

Page 14 - MAINTENANCE INSTRUCTIONS; Cleaning the Housing:; cord

MAINTENANCE INSTRUCTIONS Always unplug the air conditioner from the power supply before cleaning. To maximize the efficiency of the air conditioner, regularly clean the unit. Cleaning the Housing: • Use a soft, damp cloth to wipe the body clean. • Never use harsh chemicals, gasoline, detergents, che...

Page 15 - TROUBLESHOOTING; can void your warranty and endanger the user.

TROUBLESHOOTING The air conditioner does not operate. y Is the air conditioner plugged in? y Is the power outlet functioning correctly? y Is the full water tank indicator light flashing? y Is the ambient room temperature lower than the set temperature? y Is the filter dusty or dirty? y Is the air in...

Page 16 - TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS Model Number: AC-14000E AC-14000H Power/Ampere Consumption for Cooling* 1420W / 12.8A Power/Ampere Consumption for Heating* N/A 1420W / 12.8A 450m 3 /h Air Volume (max. speed) Voltage / Frequency 115V, 60Hz Compressor Type Rotary Refrigerant Type R-410A Number of Fan Speeds ...