NewAir 9720i - Manuals - manualsarea.com

Page 2 - How do I change the time of day and day of the week?; MENU; BACK; DAY

4 How do I change the time of day and day of the week? From the main screen press MENU. Use the UP or DOWN arrows to highlight DAY/TIME. Press SELECT. Use the UP or DOWN arrow to highlight DAY, HOUR or MINUTES. Press SET. Use the UP or DOWN arrow to scroll through the days of the week, hours or minu...

Page 3 - How do I turn on the heating or cooling cycles?; MORE; HEAT

How do I turn on the heating or cooling cycles? From the main screen press MENU. Use the UP or DOWN arrows to highlight HEAT/COOL. Press SELECT. Use the UP or DOWN arrows to highlight HEAT, COOL or AUTO. Press SELECT. The SELECT button will turn on or off the desired cycle. You do not have to turn o...

Page 4 - ON

How do I cycle the fan? From the main screen press MENU. Use the UP or DOWN buttons until FAN is highlighted. Press SELECT. Use the UP or DOWN buttons to highlight FAN settings. Press SELECT. How does INTERMITTENT FAN work? INTERMITTENT will turn the fan on for a set period of time for a given inter...

Page 5 - How do I temporarily change the temperature?; SET TEMPERATURE AT

How do I temporarily change the temperature? From the main screen, press the UP or DOWN button. The screen will change to the following. Use the UP or DOWN button to adjust to the desired temperature. This is a temporary 3-hour hold or until the next programmed event, whichever is shorter. For a lon...

Page 6 - Can I set a temporary adjustment for longer than 3 hours?

8 Can I set a temporary adjustment for longer than 3 hours? Yes you can! Press the HOLD TEMP button. The following screen appears. Press the DOWN button to highlight TEMPORARY HOLD. Press SELECT. The temperature should be highlighted. Press the UP or DOWN button to adjust the temperature. Press SET ...

Page 8 - How do I set the Vacation Mode?

How do I set the Vacation Mode? Take a trip and don’t worry about the temperature! From the main screen press the HOLD TEMP button. The following screen appears. Use the UP or DOWN arrow to highlight the VACATION HOLD feature. Press SELECT. The temperature should be highlighted. Use the UP or DOWN a...

Page 9 - How do I program my thermostat?

How do I program my thermostat? From the main screen press the MENU button. Use the UP or DOWN button to highlight PROGRAM. Press SELECT. You can select a variety of programming. Make your selection and press SELECT. MON-SUN allows every day to be set the same. MON-FRI allows for weekday programming...

Page 11 - How do I copy one day’s program to another day?; COPY; FRIDAY

How do I copy one day’s program to another day? In the program screen, press the DOWN button until COPY is highlighted. Use the UP or DOWN button to highlight the day to copy to. Press YES / NO. A YES will appear next to the day. Do this for each day to which that program is to be copied. Press FINI...

Page 12 - What are the USER settings?

What are the USER settings? The USER SETTINGS can change the way information is displayed on the thermostat and help to optimize comfort. It’s one way to truly personalize your new thermostat. To get to the USER SETTINGS, press the MENU button from the main screen. USER SETTINGS are below the FAN se...

Page 14 - More Detailed Information on the USER SETTINGS.

More Detailed Information on the USER SETTINGS. DIFFERENTIAL SETTINGS The temperature differential is your comfort level. A lower differential means your system may cycle with greater frequency but will control closer to desired setpoint temperature.The second stage delay is a timed delay to indicat...

Page 16 - What are the INSTALLER settings?; SYSTEM SETUP

What are the INSTALLER settings? The INSTALLER SETTINGS are setup during the initial installation. They tell the thermostat how to function with your heating or cool- ing equipment. The following is a brief overview and discussion of these settings. SYSTEM SETUP Choose the system component which the...

Page 19 - When would I need to change the INSTALLER settings?

22 CONTACT INFORMATION This allows the servicing HVAC contractor to put their name and phone number into the thermostat to remind you when service may be required. SERVICE MONITOR MENU Two menus are available, the Service Monitor and the Filter Monitor. Both can be set based on the HVAC system run t...