Netopia CLI 874 - Manuals

1-2 Command Line Interface Commands Reference Syntax Notation The command descriptions use formatted text to indicate various attributes of each command. The syntax is as follows: ■ Required keywords and commands that must be typed literally are in boldface . ■ Optional elements are enclosed in squa...

Introduction 1-3 Interface Naming Conventions A number of commands described in this document require you to identify the router inter face to be af fected by the command. This requires specifying both an inter face type (denoted intf-type ) and an inter face index (denoted id ). The intf-type argum...

Introduction 1-5 Online Help Beginning with Firmware Version 8.6, online help is available to prompt you when entering commands. If you enter a par tial or incorrect command, the help facility displays prompts to aler t you to the correct syntax for the command. The help facility of fers expected ke...

Motorola Netopia® Router CLI Commands 2-1 Chapter 2 Motorola Netopia ® Router CLI Commands This chapter describes the syntax of the suppor ted command set of the Motorola Netopia ® R-series, 4000-series, and 3000 Enterprise-series Router families. ■ “Configuration Access Commands” on page 2-3 ■ “MAC...

2-2 Command Line Interface Commands Reference ■ “ARP Configuration Commands” on page 2-97 ■ “Scheduled Connections Configuration Commands” on page 2-98 ■ “Default Profile Configuration Commands” on page 2-100 ■ “Frame Relay Configuration Commands” on page 2-101 ■ “Miscellaneous Commands” on page 2-1...

Motorola Netopia® Router CLI Commands 2-3 Configuration Access Commands Configuration Access Commands date xx/yy/zz show date exit preferences changes immediate { yes | no }show preferences changes immediateno preferences changes immediate preferences check vci { yes | no } preferences console defau...

2-4 Command Line Interface Commands Reference Configuration Access Commands (cont. 1) snmp hear tbeat-interval inter val show snmp hear tbeat-interval no snmp hear tbeat-interval snmp notify type [ v1-trap | v2-trap | inform ] snmp system contact string show snmp system contact no snmp system contac...

Motorola Netopia® Router CLI Commands 2-5 Configuration Access Commands (cont. 2) system syslog log-attempts { yes | no } no system syslog log-attempts show system syslog log-attempts telnet { hostname | ip-addr } [ por t value ] [ source ip_addr ] show telnet sessions telnet suspend [ a... z ] show...

2-6 Command Line Interface Commands Reference The preferences command allows you to customize cer tain aspects of the command line inter face. Preference settings persist across restar ts, and are specific to the user name, if any, you used to authenticate yourself before issuing the preferences com...

2-12 Command Line Interface Commands Reference MAC Address Security Commands Note: These commands are suppor ted beginning with firmware version 8.5. security mac-auth mode [ disabled | allow-list | deny-list ] show security mac-auth mode These commands allow you to configure or display the global M...

Motorola Netopia® Router CLI Commands 2-13 System Heartbeat Configuration Commands Note: The commands in this section are suppor ted beginning with firmware version 8.5. System Hear tbeat Configuration Commands hear tbeat enable { yes | no } show hear tbeat enable hear tbeat protocol { udp | tcp } s...

Motorola Netopia® Router CLI Commands 2-15 hear tbeat server address address show hear tbeat server address These commands allow you to specify or show the hear tbeat ser ver IP address. Beginning with Firmware Version 8.5.1, the address can also be a DNS name of up to 63 characters. hear tbeat serv...

2-16 Command Line Interface Commands Reference user name password [ { wan | lan | cp | nat | pvc | global | subnet | no-telnet }*] show userno user name These commands allow a Superuser to create, show, or delete a user and his/her access privileges. A user can change only his/her own password, and ...

2-18 Command Line Interface Commands Reference Ethernet Interface configuration commands Ethernet Inter face Configuration Commands inter face ethernet id ip address [{ ip-addr / mask-bits | ip-addr mask | secondary }] no inter face ethernet id ip address [{ ip-addr / mask-bits | ip-addr mask | seco...

Motorola Netopia® Router CLI Commands 2-19 Ethernet Inter face Configuration Commands (continued) inter face ethernet wan-id ip nat passthrough dhcp mac-address { mac-address } show inter face ethernet wan-id ip nat passthrough dhcp mac-address inter face ethernet id ip nat server-list list-tag no i...

2-20 Command Line Interface Commands Reference Ethernet Inter face RIP Configuration Commands inter face ethernet id ip rip exclude-wan-routes no inter face ethernet id ip rip exclude-wan-routes show inter face ethernet id ip rip exclude-wan-routes inter face ethernet id ip rip receive { no | v1 | v...

2-36 Command Line Interface Commands Reference Virtual LAN (VLAN) configuration commands Note: See also “RADIUS Authentication Profile configuration commands” on page 2-39 and “Additional LAN configuration command” on page 2-16 . vlan id by [ por t-based | global ] no vlan id These commands allow yo...

Motorola Netopia® Router CLI Commands 2-39 RADIUS Authentication Profile configuration commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2. authprofile id [ yes | no ] This command allows you to create or delete an authentication profile identified by id ...

Motorola Netopia® Router CLI Commands 2-41 NetBIOS configuration commands inter face ethernet 0 address-serve netbios mode enable { yes | no } no inter face ethernet 0 address-serve netbios mode enable show inter face ethernet 0 address-serve netbios mode enable These commands allow you to enable, d...

Motorola Netopia® Router CLI Commands 2-43 Generic WAN Interface configuration commands Note: For possible values of intf-type , refer to “Inter face Naming Conventions” on page 1-3 . Generic WAN Inter face Commands may be applied to any router WAN inter face by specifying the intf-type wan together...

2-44 Command Line Interface Commands Reference show inter face intf-type id statistics show inter face intf-type id stats These commands allow you to display statistics for the specified inter face, including receive frames, octets, and errors, and transmit frames, octets, and errors. For switched I...

Motorola Netopia® Router CLI Commands 2-45 UBR VC: No configuration is needed for UBR VCs.CBR VC: One parameter is required for CBR VCs, the Peak Cell Rate pcr that applies to the VC. This value should be between 1 and the line rate. You set this value according to specifications defined by your ser...

Motorola Netopia® Router CLI Commands 2-49 ADSL WAN Interface configuration commands inter face adsl id pvc vpi-value vci-value show inter face adsl id pvc These commands allow you to set, change, or show the PVC VPI and VCI values associated with the ADSL WAN inter face. show inter face adsl id sta...

2-50 Command Line Interface Commands Reference This command allows you to display statistics for the specified ADSL inter face: inter face adsl id signaling-mode { fdm | echo-cancellation } show inter face adsl id signaling-mode These commands allow you to set or show the signalling mode on an ADSL ...

Motorola Netopia® Router CLI Commands 2-51 SDSL WAN Interface configuration commands inter face sdsl id clock source { internal | network } show inter face sdsl id clock source These commands allow you to set, change, or show the clock source associated with the SDSL WAN inter face. Note: These comm...

2-52 Command Line Interface Commands Reference inter face sdsl id clock rate rate-specification show inter face sdsl id clock rate These commands allow you to set, change, or show the data rate associated with the SDSL WAN inter face. Note: The permissible values for rate-specification depend on the...

Motorola Netopia® Router CLI Commands 2-53 inter face sdsl id operation mode { generic | lucent | nokia-eoc-fast | nokia-fixed | paradyne | nor tel | newbridge } [ default ] show inter face sdsl id operation mode Note: These commands apply only to ATM-based SDSL inter faces. If the optional default ...

2-56 Command Line Interface Commands Reference Differentiated Services (Diffserv) commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2. dif fserv enable [ yes | no ] This command allows you to enable or disable Dif ferentiated Ser vices (dif fser v) for co...

Motorola Netopia® Router CLI Commands 2-57 dif fserv rule id priority [ of f | assure | expedite ] This command allows you to specify the priority for the rule id : of f , assure , or expedite. This is the Quality of Ser vice setting for the rule, based on the TOS bit information. The following tabl...

2-58 Command Line Interface Commands Reference PVCs Note: The commands in this section are suppor ted beginning with firmware release 8.3.1. inter face { adsl | sdsl } id pvc { id | tag } no inter face { adsl | sdsl } id pvc { id | tag } show inter face { adsl | sdsl } id pvc { id | tag } These comm...

Motorola Netopia® Router CLI Commands 2-61 DSL Line Type Interface Configuration Commands inter face dsl id line type { g.shdsl | sdsl-atm | sdsl-hdlc | idsl-cmn | idsl-leased | idsl } show inter face dsl id line type These commands allow you to set or show the line type for the specified DSL inter ...

2-62 Command Line Interface Commands Reference T1 WAN Interface configuration commands T1 WAN Inter face Configuration Commands inter face t1 id buildout { auto | 0-0.6 | 7.5 | 15.0 | 22.5 } show inter face t1 id buildout inter face t1 id channels count integer [ star t integer ] [ { alternating | c...

Motorola Netopia® Router CLI Commands 2-65 T1 Statistic and Diagnostic commands show inter face t1 id errors { current | interval 1..96 | total } This command displays the error statistics for the specified T1 WAN inter face for a par ticular 15-minute inter val during the previous 24-hour period, o...

2-66 Command Line Interface Commands Reference Bipolar Violation Count 001 #show interface t1 1 errors current Current Interval elapsed time 02:45 Errored Seconds 002 Unavailable Seconds 000 Severely Errored Seconds 001 Bursty Errored Seconds 001 Loss of Frame Count 000 Bipolar Violation Count 000 i...

Motorola Netopia® Router CLI Commands 2-67 show inter face t1 id line status This command displays the line status on the specified T1 inter face. This will display one of the following strings: Red Alarm Yellow Alarm Blue Alarm Normal Operation show inter face t1 id loopback mode This command displ...

2-68 Command Line Interface Commands Reference Unprotected Services Configuration Commands Note: These commands are suppor ted beginning with Firmware Version 8.7.4. When using an IPSec force-all tunnel, Unprotected Ser vices suppor ts router-generated packets with a source IP address outside the lo...

2-70 Command Line Interface Commands Reference IGMP Configuration Commands Note: These commands are suppor ted beginning with Firmware Version 8.5.1. IGMP Version 3 is suppor ted beginning with Firmware Version 8.7. igmp version ( v1 | v2 | v3 ) show igmp version These commands allow you to set or s...

Motorola Netopia® Router CLI Commands 2-73 Global IP Configuration Commands Global IP Configuration Commands ip dns { 1 | 2 } ip-addr no ip dns [ { 1 | 2 } [ ip-addr ] ] show ip dns [ { 1 | 2 } ] ip domain-name string no ip domain-name [ string ] show ip domain-name ip gateway ip-addr no ip gateway ...

Motorola Netopia® Router CLI Commands 2-77 DHCP Gen-Options, Option Groups, and Option Filtersets Commands DHCP Gen-Options commands ip dhcp gen-option tag option 1..255 [ data-type { ascii | hex | dotted-decimal } ] [ data data ] This command allows you to specify a DHCP generic option set specifie...

Motorola Netopia® Router CLI Commands 2-81 DHCP Option Groups commands ip dhcp option-group tag [ gen-option gen_option_tag ] show ip dhcp option-group tag no ip dhcp option-group tag [ gen-option gen_option_tag ] These commands allow you to set, display, or disable one of up to eight DHCP Option Gr...

2-82 Command Line Interface Commands Reference DHCP Option Filtersets commands Suppor t for DHCP option filtering is provided via the filterset settings. ip dhcp-filterset fs-tag [ filter { new | last | id { 1..8 } } [ type { dhcp-option | hw-address | requested-option } ] [ dhcp-option { 1..255 } ]...

Motorola Netopia® Router CLI Commands 2-83 A filter can be identified by its ones-based index, [e.g.] 1, or with the special new keyword. Subsequent modifications to this filter, assuming no more filters have been added to the filter set yet, must be done by referring to the filter either by id (1),...

2-86 Command Line Interface Commands Reference Wireless Configuration Commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.2 on wireless (802.11)- enabled routers. Wireless Configuration Commands wireless enable [ yes | no ] show wireless enable wireless close...

Motorola Netopia® Router CLI Commands 2-91 wireless mac-delete MAC_address This command allows you to delete the specified MAC address(es) from the table of MAC addresses maintained for this WLAN. Wireless Privacy Commands (new and revised) Note: The commands in this section are suppor ted beginning...

Motorola Netopia® Router CLI Commands 2-93 Wireless Multiple SSID Commands Note: These commands are suppor ted beginning with firmware version 8.5. Wireless Multi-SSID Configuration Commands wireless block-bridging [ enable | disable ] no wireless block-bridgingshow wireless block-bridging wireless ...

Motorola Netopia® Router CLI Commands 2-95 wireless second-ssid string no wireless second-ssid show wireless second-ssid These commands allow you to specify or show a 32-character string or Network Name used to identify a second SSID. This SSID will not be broadcasted. The no command will reset the ...

2-96 Command Line Interface Commands Reference wireless first-ssid-wpaver [ all | WPA-v1-only | WPA-v2-only ] show wireless first-ssid-wpaver wireless second-ssid-wpaver [ all | WPA-v1-only | WPA-v2-only ] show wireless second-ssid-wpaver wireless third-ssid-wpaver [ all | WPA-v1-only | WPA-v2-only ...

Motorola Netopia® Router CLI Commands 2-97 ARP Configuration Commands Note: The hw-address format for an Ethernet MAC address is six hexadecimal values between 00 and FF inclusive separated by colons. Thus, the following is an example of a valid Ethernet MAC address hw-address : 00:00:C5:70:00:04 ar...

2-98 Command Line Interface Commands Reference ARP and Bridge timeout settings Note: These commands are suppor ted beginning with Firmware Version 8.4.2. ip arp-timeout timeout This command allows you to set the timeout value for ARP timeout. Default = 600 secs (10 mins); range = 60 secs - 6000 secs...

2-100 Command Line Interface Commands Reference schedule id periodic interval ( 15min | 30min | 1hour | 2hour | 3hour | 4hour | 4hour | 8hour ) If you specify periodic , this command allows you to specify for how long the system will retr y to bring up the connection. schedule id random interval { x...

Motorola Netopia® Router CLI Commands 2-101 When the DHCP client is activated on a RFC1483 MER inter face, it examines the dhcp client mode in the associated connection profile (or the default profile there was no explicitly configured connection profile). If the dhcp client mode specifies standard ...

Motorola Netopia® Router CLI Commands 2-103 Miscellaneous Commands clear This command erases the screen. Miscellaneous Commands clearping [ ip ] { ip-addr | hostname } [ count count ] [ timeout milliseconds ] [ delay milliseconds ] [ size bytes ] [ source ip-addr ] ping oam inter face sdsl id pvc { ...

Motorola Netopia® Router CLI Commands 2-105 The default count is 5, and the default timeout is 0. receive tftp config [ ser ver-name file-name ] This command allows you to initiate a configuration file upload from the command line inter face. If the TFTP ser ver name and config file name were set pr...

2-108 Command Line Interface Commands Reference show version [ cli ] [ firmware ] [ hardware ] [ mib ] [ wan 1 ] [ wan 2 ] This command allows you to display some or all of the router's version strings. If you don't specify anything after the keyword version , the router displays a list of all of th...

2-110 Command Line Interface Commands Reference IP Network Address Translation (NAT) Commands Overview Network Address Translation (NAT) makes use of five basic structures: ■ “public” or externally visible address ranges ■ “map” rules that bind an interior, private address range with a public addres...

Motorola Netopia® Router CLI Commands 2-111 ip nat public tag static pub-from-address pub-to-address This command allows you to allocate a range of exterior, public addresses for use by Network Address Translation. This range of addresses will be associated one-to-one with private addresses you will...

2-114 Command Line Interface Commands Reference NAT Application Layer Gateway Commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.2. ip nat alg [ algname ] enable [ yes | no ] show ip nat alg [ algname ] enable no ip nat alg [ algname ] enable These commands ...

Motorola Netopia® Router CLI Commands 2-115 Backup Configuration Commands backup enable { no | manual | automatic | yes } no backup show backup status These commands allow you to set, disable, or display the status of the dial backup feature. Note: yes = automatic Backup Configuration Commands backu...

2-118 Command Line Interface Commands Reference Serial port modem backup configuration commands inter face serial id modem directory-number string no inter face serial id modem directory-number show inter face serial id modem directory-number string These commands allow you to set, disable, or show ...

Motorola Netopia® Router CLI Commands 2-119 inter face serial id mode { console | modem } show inter face serial id mode These commands allow you to set or show the mode for the specified serial por t, either console or modem . In console mode, the por t automatically detects the baud rate of your t...

2-120 Command Line Interface Commands Reference radius-server { 1 | 2 } { ip-address | hostname } [ secret secret ] no radius-server { 1 | 2 } show radius-server [ 1 | 2 ] These commands allow you to specify, delete, or show a RADIUS server either by using an IP address in dotted-quad notation or by...

Motorola Netopia® Router CLI Commands 2-121 index : 1 = primar y ser ver; 2 = alternate ser ver host : IP address or DNS hostname of ser ver secret : RADIUS or TACACS+ shared secret tacacs-plus accounting [ yes | no ] This command enables or disables TACACS+ accounting. IP Filterset Configuration Co...

Motorola Netopia® Router CLI Commands 2-123 ip filterset "Basic Firewall" in 2 protocol tcp source nc destination eq 6000 any Note: Some commands, when dumping existing canned filters, exceed 78 characters and will wrap. To work around this limitation use truncated keywords. no Syntax corres...

2-124 Command Line Interface Commands Reference Global IPSec/IKE Configuration Commands IKE Configuration Commands ike phase1 { name | index } [ { yes | no } ] no ike phase1 { name | index } show ike phase1 { name | index } show ike phase1 { name | index } id ike phase1 { name | index } tag string s...

2-126 Command Line Interface Commands Reference ike phase1 { name | index } tag string show ike phase1 { name | index } tag These commands name or display the specified IKE Phase1 profile. ike phase1 { name | index } mode { main | aggressive } show ike phase1 { name | index } mode These commands set...

Motorola Netopia® Router CLI Commands 2-127 ike phase1 { name | index } authentication shared-secret { ascii | hexadecimal } string This command sets the specified IKE Phase1 profile’s shared secret. For security reasons no show variant of this command exists. ike phase1 { name | index } dangling-sa...

Motorola Netopia® Router CLI Commands 2-129 IKE Dead Peer Detection Note: The commands in this section are suppor ted beginning with Firmware Version 8.5.2. ike phase1 { name | index } dead-peer-detection enable { yes | no } show ike phase1 { name | index } dead-peer-detection enable no ike phase1 {...

2-130 Command Line Interface Commands Reference Xauth configuration commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2. ike phase1 { name | index } xauth mode { disabled | client | concentrator } show ike phase1 { name | index } xauth mode These commands...

Motorola Netopia® Router CLI Commands 2-131 Current Restrictions None.

Motorola Netopia® Router Connection Profile Commands 3-1 Chapter 3 Motorola Netopia ® Router Connection Profile Commands This chapter describes the syntax of the suppor ted command set for creating and modifying Connection Profiles on the Motorola Netopia ® R-series, 4000-series, and 3000 Enterprise...

3-2 Command Line Interface Commands Reference Connection Profile Commands Connection Profile Commands cp { name | index } no cp { name | index } show cp { name | index } cp { name | index } enable { yes | no } no cp { name | index } enable show cp { name | index } enable cp { name | index } tag stri...

Motorola Netopia® Router Connection Profile Commands 3-3 Connection Profile Commands (continued, 1) show cp { name | index } ip dhcp client status Note: The command above is suppor ted beginning with firmware release 8.5. show cp { name | index } ip dhcp client [ renew | release ] Note: The command ...

3-4 Command Line Interface Commands Reference Connection Profile Commands (continued, 2) cp { name | index } ppp authentication type { none | pap | chap } no cp { name | index } ppp authentication type show cp { name | index } ppp authentication type cp { name | index } ppp authentication { send | r...

Motorola Netopia® Router Connection Profile Commands 3-5 Connection Profile Commands (continued, 3) cp { name | index } telco dn [ 1 | 2 ] string no cp { name | index } telco dn [ 1 | 2 ] show cp { name | index } telco dn [ 1 | 2 ] cp { name | index } telco prefix string no cp { name | index } telco...

3-6 Command Line Interface Commands Reference Connection Profile Commands (continued, 4) Connection Profile PPTP Commands cp { name | index } pptp ip par tner ip-addr cp { name | index } pptp ip via ip-addr cp { name | index } pptp authentication type { pap | chap | mschap } cp { name | index } pptp...

Motorola Netopia® Router Connection Profile Commands 3-7 Connection Profile Commands (continued, 5) Connection Profile RIP-2 MD5 Configuration Commands cp id ip rip auth key id no cp id ip rip auth key id show config cp id ip rip auth key cp id ip rip auth key id star t date date show cp id ip rip a...

3-8 Command Line Interface Commands Reference Connection Profile Commands (continued, 6) Connection Profile Stateful Inspection Commands cp { name | index } ip state-insp enable { yes | no | on | of f } no cp { name | index } ip state-insp enable show cp { name | index } ip state-insp enable cp { na...

Motorola Netopia® Router Connection Profile Commands 3-9 Connection Profile Commands (continued, 7) Connection Profile L2TP Configuration Commands cp { name | index } l2tp ip par tner ip-addr show cp { name | index } l2tp ip par tner cp { name | index } l2tp ip via ip-addr show cp { name | index } l...

3-10 Command Line Interface Commands Reference Note on Connection Profile numbering sequence The Easy Setup Profile is always assumed to be the Primar y Connection Profile, whether or not it exists. The menu console reser ves the index number 1 (one) for the Easy Setup Profile, even if you do not cr...

Motorola Netopia® Router Connection Profile Commands 3-11 cp { name | index } This command allows you to create a connection profile, which is a structure used to define WAN connections. index can be any value from 1 to 16. The command has no ef fect if the profile already exists. The name of the pr...

3-12 Command Line Interface Commands Reference cp { name | index } filterset string no cp { name | index } filterset [ string ] show cp { name | index } filterset These commands allow you to associate a filter set with the a connection profile. The filter set is identified by name. cp { name | index...

Motorola Netopia® Router Connection Profile Commands 3-13 show cp { name | index } ip dhcp client [ renew | release ] Note: This command is suppor ted beginning with firmware version 8.5. This command allows you to renew or release the ethernet WAN IP address lease being ser ved via DHCP for the spe...

3-16 Command Line Interface Commands Reference cp { name | index } telco dn [ 1 | 2 ] string This command allows you to set the profile’s director y number, or number-to-dial (DN). The number can be up to 32 characters in length and may contain non-dialable characters, which are ignored when placing...

3-18 Command Line Interface Commands Reference PPTP commands cp { name | index } pptp ip par tner ip-addr This command allows you to specify a PPTP par tner IP address for a par ticular connection profile specified by name or index . cp { name | index } pptp ip via ip-addr This command allows you to...

Motorola Netopia® Router Connection Profile Commands 3-19 Manual connect/disconnect commands connect cp { name | index } Invoking this command with a valid, applicable connection profile will cause the router to attempt to make the appropriate connection, using the profile’s settings. A valid, appli...

3-20 Command Line Interface Commands Reference cp id ip rip auth key id end date date show cp id ip rip auth key id end date These commands allow you to set or show an end date for the RIP-2 Authentication key(s) on the specified Connection Profile. The acceptable year range is from 1904 – 2039. cp ...

Motorola Netopia® Router Connection Profile Commands 3-21 Beginning with Firmware Version 8.3.3, IP Passthrough allows a first come first ser ve mode, which defaults to an all-zeroes MAC address. If you leave the default all-zeroes MAC address, the Router will select the next DHCP client that initia...

3-22 Command Line Interface Commands Reference cp { name | index } ip state-insp xposed-list xposed-list_name no cp { name | index } ip state-insp xposed-list show cp { name | index } ip state-insp xposed-list These commands allow you to set, disable, or show the status of a stateful inspection expo...

Motorola Netopia® Router Connection Profile Commands 3-23 cp { name | index } l2tp authentication passphrase string This command sets the local (i.e. LAC/LNS) passphrase. The passphrase must be at least eight characters in length. This value is used to establish the shared secret key that must be pr...

3-24 Command Line Interface Commands Reference cp { name | index } gre checksum [ yes | no ] show cp { name | index } gre checksum [ yes | no ] These commands allow you to enable, disable, or show whether a GRE tunnel will transmit a checksum field on outgoing GRE packets, when enabled. The Router w...

Motorola Netopia® Router Connection Profile Commands 3-25 cp { name | index } telco compuserve login { yes | no } show cp { name | index } telco compuserve login no cp { name | index } telco compuserve login These commands set, display, or disable the specified connection profile’s CompuSer ve login...

Motorola Netopia® Router Connection Profile Commands 3-29 IKE/IPSec Connection Profile Commands cp { name | index } ipsec dead-peer-detection { yes | no } show cp { name | index } ipsec dead-peer-detection no cp { name | index } ipsec dead-peer-detection cp { name | index } ipsec dead-peer-detection...

Motorola Netopia® Router Connection Profile Commands 3-31 cp { name | index } ipsec dead-peer-detection ping-reply-timeout 1..65535 show cp { name | index } ipsec dead-peer-detection ping-reply-timeout Note: These commands are suppor ted beginning with firmware version 8.2 These commands allow you t...

3-32 Command Line Interface Commands Reference cp { name | index } ipsec suite encapsulation { esp | ah | esp+ah } [ encryption { des | 3des | null } ] [ authentication esp { md5 | hmac-md5-96 | sha1 | hmac-sha1-96 } ] [ authentication ah { md5 | hmac-md5-96 | sha1 | hmac-sha1-96 } ] [ compression l...

Motorola Netopia® Router Text Configuration Upload 4-1 Chapter 4 Motorola Netopia ® Router Text Configuration Upload This chapter describes the suppor ted TFTP text configuration upload process. TFTP Text Configuration Upload Overview You can configure many of the basic features of the router by upl...

4-2 Command Line Interface Commands Reference VT100 Command Line Console The router’s console user inter face comes up in Menu mode by default. In this mode you use the arrow, Escape, and Return/Enter keys to navigate through a series of screens. To invoke the command line at any time, hit Control-N...

Motorola Netopia® Router Text Configuration Upload 4-3 Example Text Configuration File The following text file is provided for your use as an example. Make your own appropriate substitutions. Note: All commands, including the last, must be followed by an appropriate end-of-line sequence (Carriage Re...

4-4 Command Line Interface Commands Reference ;cp 1 ip nat enabled yes ;cp 1 ip addressing unnumbered ;cp 1 ip addressing numbered ;cp 1 ip address remote 163.176.224.1 ;cp 1 ip mask local 255.255.255.0 ;cp 1 ip mask remote 255.255.255.0 ;cp 1 dle rfc1483 ;cp 1 dle ppp ;cp 1 ppp authentication pap ;...

CLI Error Messages 5-1 Chapter 5 CLI Error Messages This chapter describes the CLI error messages and their meaning. Negative errors Negative errors are fatal. They will terminate processing of a TFTP configuration file upload if the command that caused the error was executed as par t of a TFTP conf...

5-2 Command Line Interface Commands Reference Fatal syntax errors ; error -101: no match This error indicates that you entered an unrecognized command. ; error -120: syntax error This error indicates that you entered a command with a syntactic error for which the command line processor was unable to...

5-4 Command Line Interface Commands Reference Example: #ping 192.168.1.1 count abc ; error -126: number required ; error -127: index out of bounds This error indicates that an out of range value was specified in a command that requires an index, such as attempting to access connection profile 17 on ...

5-8 Command Line Interface Commands Reference ; error -147: too many tokens This error indicates that you entered more items than are allowed as par t of the command. This could result from failing to quote a string value that contains one or more spaces. Example: #cp 1 telco dn 555 1212 ; error -14...

5-10 Command Line Interface Commands Reference Voice command errors ; error -250: bad extension number ; error -251: extension number does not exist ; error -252: extension number already exists ; error -253: wrong Auto-Attendant time ; error -254: directory number doesn't exist ; error -255: port h...

CLI Error Messages 5-11 ; error -268: invalid digit ; error -269: only single digit allowed Fatal access control errors ; error -400: access denied This error indicates that you attempted to display an attribute that may not be displayed, or to change an attribute to which you do not have access. Ex...

5-12 Command Line Interface Commands Reference ; error 102: can't delete This error indicates that you attempted to delete an item that doesn't exist. Example: #show interface ethernet 0 address-serve helper interface ethernet 0 address-serve helper 10.0.0.1 interface ethernet 0 address-serve helper...

Index-13 Index of Commands A ALANs 2-16 ip nat alg 2-114 no ip nat alg 2-114 show ip nat alg 2-114 arp 2-97 authprofile 2-39 authprofile id alternate secret 2-40 authprofile id alternate ser ver 2-39 authprofile id radius identifier 2-40 authprofile id radius por t 2-40 authprofile id remote secret ...