Netopia CLI 874 - Manual - manualsarea.com

Page 2 - Command Line Interface Commands Reference; Copyright

2 Command Line Interface Commands Reference Copyright Copyright © 2007 by Motorola, Inc. All rights reser ved. No par t of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission...

Page 3 - Contents

Contents 3 G Chapter 1 — Introduction.......................................................... 1-1 New Commands in Firmware Version 8.7.4 ...................... 1-1 Syntax Notation ............................................................. 1-2 Inter face Naming Conventions .........................

Page 7 - Command Line Inter face Commands Reference

Introduction 1-1 Chapter 1 Introduction This Command Line Inter face Commands Reference contains information on the syntax and use of the Command Line Inter face for the Motorola Netopia ® router family. It provides information required to configure the router firmware and troubleshoot problems usin...

Page 8 - -2 Command Line Interface Commands Reference; Syntax Notation; boldface

1-2 Command Line Interface Commands Reference Syntax Notation The command descriptions use formatted text to indicate various attributes of each command. The syntax is as follows: ■ Required keywords and commands that must be typed literally are in boldface . ■ Optional elements are enclosed in squa...

Page 9 - Interface Naming Conventions; wan; Entering and Editing Commands

Introduction 1-3 Interface Naming Conventions A number of commands described in this document require you to identify the router inter face to be af fected by the command. This requires specifying both an inter face type (denoted intf-type ) and an inter face index (denoted id ). The intf-type argum...

Page 11 - Online Help; If you enter the par tial command

Introduction 1-5 Online Help Beginning with Firmware Version 8.6, online help is available to prompt you when entering commands. If you enter a par tial or incorrect command, the help facility displays prompts to aler t you to the correct syntax for the command. The help facility of fers expected ke...

Page 12 - -6 Command Line Interface Commands Reference

Page 13 - Motorola Netopia® Router CLI Commands 2-1; Chapter 2

Motorola Netopia® Router CLI Commands 2-1 Chapter 2 Motorola Netopia ® Router CLI Commands This chapter describes the syntax of the suppor ted command set of the Motorola Netopia ® R-series, 4000-series, and 3000 Enterprise-series Router families. ■ “Configuration Access Commands” on page 2-3 ■ “MAC...

Page 14 - -2 Command Line Interface Commands Reference

2-2 Command Line Interface Commands Reference ■ “ARP Configuration Commands” on page 2-97 ■ “Scheduled Connections Configuration Commands” on page 2-98 ■ “Default Profile Configuration Commands” on page 2-100 ■ “Frame Relay Configuration Commands” on page 2-101 ■ “Miscellaneous Commands” on page 2-1...

Page 15 - Motorola Netopia® Router CLI Commands 2-3; Configuration Access Commands; seconds

Motorola Netopia® Router CLI Commands 2-3 Configuration Access Commands Configuration Access Commands date xx/yy/zz show date exit preferences changes immediate { yes | no }show preferences changes immediateno preferences changes immediate preferences check vci { yes | no } preferences console defau...

Page 16 - -4 Command Line Interface Commands Reference

2-4 Command Line Interface Commands Reference Configuration Access Commands (cont. 1) snmp hear tbeat-interval inter val show snmp hear tbeat-interval no snmp hear tbeat-interval snmp notify type [ v1-trap | v2-trap | inform ] snmp system contact string show snmp system contact no snmp system contac...

Page 17 - Motorola Netopia® Router CLI Commands 2-5

Motorola Netopia® Router CLI Commands 2-5 Configuration Access Commands (cont. 2) system syslog log-attempts { yes | no } no system syslog log-attempts show system syslog log-attempts telnet { hostname | ip-addr } [ por t value ] [ source ip_addr ] show telnet sessions telnet suspend [ a... z ] show...

Page 18 - -6 Command Line Interface Commands Reference

2-6 Command Line Interface Commands Reference The preferences command allows you to customize cer tain aspects of the command line inter face. Preference settings persist across restar ts, and are specific to the user name, if any, you used to authenticate yourself before issuing the preferences com...

Page 24 - -12 Command Line Interface Commands Reference; MAC Address Security Commands; These commands are suppor ted beginning with firmware version 8.5.

2-12 Command Line Interface Commands Reference MAC Address Security Commands Note: These commands are suppor ted beginning with firmware version 8.5. security mac-auth mode [ disabled | allow-list | deny-list ] show security mac-auth mode These commands allow you to configure or display the global M...

Page 25 - Motorola Netopia® Router CLI Commands 2-13; System Heartbeat Configuration Commands

Motorola Netopia® Router CLI Commands 2-13 System Heartbeat Configuration Commands Note: The commands in this section are suppor ted beginning with firmware version 8.5. System Hear tbeat Configuration Commands hear tbeat enable { yes | no } show hear tbeat enable hear tbeat protocol { udp | tcp } s...

Page 27 - Tiered Configuration Access Commands; command

Motorola Netopia® Router CLI Commands 2-15 hear tbeat server address address show hear tbeat server address These commands allow you to specify or show the hear tbeat ser ver IP address. Beginning with Firmware Version 8.5.1, the address can also be a DNS name of up to 63 characters. hear tbeat serv...

Page 28 - Interface Configuration Commands; Additional LAN configuration command; “Vir tual LAN (VLAN) configuration commands”

2-16 Command Line Interface Commands Reference user name password [ { wan | lan | cp | nat | pvc | global | subnet | no-telnet }*] show userno user name These commands allow a Superuser to create, show, or delete a user and his/her access privileges. A user can change only his/her own password, and ...

Page 30 - -18 Command Line Interface Commands Reference; Ethernet Interface configuration commands; id

2-18 Command Line Interface Commands Reference Ethernet Interface configuration commands Ethernet Inter face Configuration Commands inter face ethernet id ip address [{ ip-addr / mask-bits | ip-addr mask | secondary }] no inter face ethernet id ip address [{ ip-addr / mask-bits | ip-addr mask | seco...

Page 31 - Motorola Netopia® Router CLI Commands 2-19

Motorola Netopia® Router CLI Commands 2-19 Ethernet Inter face Configuration Commands (continued) inter face ethernet wan-id ip nat passthrough dhcp mac-address { mac-address } show inter face ethernet wan-id ip nat passthrough dhcp mac-address inter face ethernet id ip nat server-list list-tag no i...

Page 32 - -20 Command Line Interface Commands Reference

2-20 Command Line Interface Commands Reference Ethernet Inter face RIP Configuration Commands inter face ethernet id ip rip exclude-wan-routes no inter face ethernet id ip rip exclude-wan-routes show inter face ethernet id ip rip exclude-wan-routes inter face ethernet id ip rip receive { no | v1 | v...

Page 48 - -36 Command Line Interface Commands Reference; Virtual LAN (VLAN) configuration commands; See also

2-36 Command Line Interface Commands Reference Virtual LAN (VLAN) configuration commands Note: See also “RADIUS Authentication Profile configuration commands” on page 2-39 and “Additional LAN configuration command” on page 2-16 . vlan id by [ por t-based | global ] no vlan id These commands allow yo...

Page 51 - Motorola Netopia® Router CLI Commands 2-39; RADIUS Authentication Profile configuration commands; containing relevant

Motorola Netopia® Router CLI Commands 2-39 RADIUS Authentication Profile configuration commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2. authprofile id [ yes | no ] This command allows you to create or delete an authentication profile identified by id ...

Page 53 - Motorola Netopia® Router CLI Commands 2-41; NetBIOS configuration commands

Motorola Netopia® Router CLI Commands 2-41 NetBIOS configuration commands inter face ethernet 0 address-serve netbios mode enable { yes | no } no inter face ethernet 0 address-serve netbios mode enable show inter face ethernet 0 address-serve netbios mode enable These commands allow you to enable, d...

Page 55 - Motorola Netopia® Router CLI Commands 2-43; Generic WAN Interface configuration commands; “Inter face Naming Conventions” on page 1-3

Motorola Netopia® Router CLI Commands 2-43 Generic WAN Interface configuration commands Note: For possible values of intf-type , refer to “Inter face Naming Conventions” on page 1-3 . Generic WAN Inter face Commands may be applied to any router WAN inter face by specifying the intf-type wan together...

Page 56 - -44 Command Line Interface Commands Reference; Restricted WAN Interface configuration commands; tag

2-44 Command Line Interface Commands Reference show inter face intf-type id statistics show inter face intf-type id stats These commands allow you to display statistics for the specified inter face, including receive frames, octets, and errors, and transmit frames, octets, and errors. For switched I...

Page 57 - ISDN WAN Interface configuration commands; interface isdn 1 imux mode dml

Motorola Netopia® Router CLI Commands 2-45 UBR VC: No configuration is needed for UBR VCs.CBR VC: One parameter is required for CBR VCs, the Peak Cell Rate pcr that applies to the VC. This value should be between 1 and the line rate. You set this value according to specifications defined by your ser...

Page 61 - Motorola Netopia® Router CLI Commands 2-49; ADSL WAN Interface configuration commands; xxx

Motorola Netopia® Router CLI Commands 2-49 ADSL WAN Interface configuration commands inter face adsl id pvc vpi-value vci-value show inter face adsl id pvc These commands allow you to set, change, or show the PVC VPI and VCI values associated with the ADSL WAN inter face. show inter face adsl id sta...

Page 62 - -50 Command Line Interface Commands Reference

2-50 Command Line Interface Commands Reference This command allows you to display statistics for the specified ADSL inter face: inter face adsl id signaling-mode { fdm | echo-cancellation } show inter face adsl id signaling-mode These commands allow you to set or show the signalling mode on an ADSL ...

Page 63 - Motorola Netopia® Router CLI Commands 2-51; SDSL WAN Interface configuration commands

Motorola Netopia® Router CLI Commands 2-51 SDSL WAN Interface configuration commands inter face sdsl id clock source { internal | network } show inter face sdsl id clock source These commands allow you to set, change, or show the clock source associated with the SDSL WAN inter face. Note: These comm...

Page 64 - -52 Command Line Interface Commands Reference

2-52 Command Line Interface Commands Reference inter face sdsl id clock rate rate-specification show inter face sdsl id clock rate These commands allow you to set, change, or show the data rate associated with the SDSL WAN inter face. Note: The permissible values for rate-specification depend on the...

Page 65 - Motorola Netopia® Router CLI Commands 2-53

Motorola Netopia® Router CLI Commands 2-53 inter face sdsl id operation mode { generic | lucent | nokia-eoc-fast | nokia-fixed | paradyne | nor tel | newbridge } [ default ] show inter face sdsl id operation mode Note: These commands apply only to ATM-based SDSL inter faces. If the optional default ...

Page 68 - -56 Command Line Interface Commands Reference; Differentiated Services (Diffserv) commands; string

2-56 Command Line Interface Commands Reference Differentiated Services (Diffserv) commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2. dif fserv enable [ yes | no ] This command allows you to enable or disable Dif ferentiated Ser vices (dif fser v) for co...

Page 69 - Motorola Netopia® Router CLI Commands 2-57

Motorola Netopia® Router CLI Commands 2-57 dif fserv rule id priority [ of f | assure | expedite ] This command allows you to specify the priority for the rule id : of f , assure , or expedite. This is the Quality of Ser vice setting for the rule, based on the TOS bit information. The following tabl...

Page 70 - -58 Command Line Interface Commands Reference; PVCs; of up to 14 ASCII characters. The

2-58 Command Line Interface Commands Reference PVCs Note: The commands in this section are suppor ted beginning with firmware release 8.3.1. inter face { adsl | sdsl } id pvc { id | tag } no inter face { adsl | sdsl } id pvc { id | tag } show inter face { adsl | sdsl } id pvc { id | tag } These comm...

Page 73 - Motorola Netopia® Router CLI Commands 2-61; DSL Line Type Interface Configuration Commands

Motorola Netopia® Router CLI Commands 2-61 DSL Line Type Interface Configuration Commands inter face dsl id line type { g.shdsl | sdsl-atm | sdsl-hdlc | idsl-cmn | idsl-leased | idsl } show inter face dsl id line type These commands allow you to set or show the line type for the specified DSL inter ...

Page 74 - -62 Command Line Interface Commands Reference; T1 WAN Interface configuration commands; integer

2-62 Command Line Interface Commands Reference T1 WAN Interface configuration commands T1 WAN Inter face Configuration Commands inter face t1 id buildout { auto | 0-0.6 | 7.5 | 15.0 | 22.5 } show inter face t1 id buildout inter face t1 id channels count integer [ star t integer ] [ { alternating | c...

Page 77 - Motorola Netopia® Router CLI Commands 2-65; T1 Statistic and Diagnostic commands; displays

Motorola Netopia® Router CLI Commands 2-65 T1 Statistic and Diagnostic commands show inter face t1 id errors { current | interval 1..96 | total } This command displays the error statistics for the specified T1 WAN inter face for a par ticular 15-minute inter val during the previous 24-hour period, o...

Page 78 - -66 Command Line Interface Commands Reference

2-66 Command Line Interface Commands Reference Bipolar Violation Count 001 #show interface t1 1 errors current Current Interval elapsed time 02:45 Errored Seconds 002 Unavailable Seconds 000 Severely Errored Seconds 001 Bursty Errored Seconds 001 Loss of Frame Count 000 Bipolar Violation Count 000 i...

Page 79 - Motorola Netopia® Router CLI Commands 2-67

Motorola Netopia® Router CLI Commands 2-67 show inter face t1 id line status This command displays the line status on the specified T1 inter face. This will display one of the following strings: Red Alarm Yellow Alarm Blue Alarm Normal Operation show inter face t1 id loopback mode This command displ...

Page 80 - -68 Command Line Interface Commands Reference; Unprotected Services Configuration Commands; not

2-68 Command Line Interface Commands Reference Unprotected Services Configuration Commands Note: These commands are suppor ted beginning with Firmware Version 8.7.4. When using an IPSec force-all tunnel, Unprotected Ser vices suppor ts router-generated packets with a source IP address outside the lo...

Page 82 - -70 Command Line Interface Commands Reference; IGMP Configuration Commands; value

2-70 Command Line Interface Commands Reference IGMP Configuration Commands Note: These commands are suppor ted beginning with Firmware Version 8.5.1. IGMP Version 3 is suppor ted beginning with Firmware Version 8.7. igmp version ( v1 | v2 | v3 ) show igmp version These commands allow you to set or s...

Page 85 - Motorola Netopia® Router CLI Commands 2-73; Global IP Configuration Commands

Motorola Netopia® Router CLI Commands 2-73 Global IP Configuration Commands Global IP Configuration Commands ip dns { 1 | 2 } ip-addr no ip dns [ { 1 | 2 } [ ip-addr ] ] show ip dns [ { 1 | 2 } ] ip domain-name string no ip domain-name [ string ] show ip domain-name ip gateway ip-addr no ip gateway ...

Page 89 - Motorola Netopia® Router CLI Commands 2-77; DHCP Gen-Options, Option Groups, and Option Filtersets Commands; DHCP Gen-Options commands; of one to 15 characters. You

Motorola Netopia® Router CLI Commands 2-77 DHCP Gen-Options, Option Groups, and Option Filtersets Commands DHCP Gen-Options commands ip dhcp gen-option tag option 1..255 [ data-type { ascii | hex | dotted-decimal } ] [ data data ] This command allows you to specify a DHCP generic option set specifie...

Page 93 - Motorola Netopia® Router CLI Commands 2-81; DHCP Option Groups commands; Option Groups

Motorola Netopia® Router CLI Commands 2-81 DHCP Option Groups commands ip dhcp option-group tag [ gen-option gen_option_tag ] show ip dhcp option-group tag no ip dhcp option-group tag [ gen-option gen_option_tag ] These commands allow you to set, display, or disable one of up to eight DHCP Option Gr...

Page 94 - -82 Command Line Interface Commands Reference; DHCP Option Filtersets commands

2-82 Command Line Interface Commands Reference DHCP Option Filtersets commands Suppor t for DHCP option filtering is provided via the filterset settings. ip dhcp-filterset fs-tag [ filter { new | last | id { 1..8 } } [ type { dhcp-option | hw-address | requested-option } ] [ dhcp-option { 1..255 } ]...

Page 95 - Motorola Netopia® Router CLI Commands 2-83; rules; absent

Motorola Netopia® Router CLI Commands 2-83 A filter can be identified by its ones-based index, [e.g.] 1, or with the special new keyword. Subsequent modifications to this filter, assuming no more filters have been added to the filter set yet, must be done by referring to the filter either by id (1),...

Page 98 - -86 Command Line Interface Commands Reference; Wireless Configuration Commands

2-86 Command Line Interface Commands Reference Wireless Configuration Commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.2 on wireless (802.11)- enabled routers. Wireless Configuration Commands wireless enable [ yes | no ] show wireless enable wireless close...

Page 103 - Motorola Netopia® Router CLI Commands 2-91; Wireless Privacy Commands (new and revised); used to identify this

Motorola Netopia® Router CLI Commands 2-91 wireless mac-delete MAC_address This command allows you to delete the specified MAC address(es) from the table of MAC addresses maintained for this WLAN. Wireless Privacy Commands (new and revised) Note: The commands in this section are suppor ted beginning...

Page 105 - Motorola Netopia® Router CLI Commands 2-93; Wireless Multiple SSID Commands

Motorola Netopia® Router CLI Commands 2-93 Wireless Multiple SSID Commands Note: These commands are suppor ted beginning with firmware version 8.5. Wireless Multi-SSID Configuration Commands wireless block-bridging [ enable | disable ] no wireless block-bridgingshow wireless block-bridging wireless ...

Page 107 - Motorola Netopia® Router CLI Commands 2-95

Motorola Netopia® Router CLI Commands 2-95 wireless second-ssid string no wireless second-ssid show wireless second-ssid These commands allow you to specify or show a 32-character string or Network Name used to identify a second SSID. This SSID will not be broadcasted. The no command will reset the ...

Page 108 - Wireless MultiMedia (WMM) Configuration Commands; These commands are suppor ted beginning with Firmware Version 8.7.

Page 109 - Motorola Netopia® Router CLI Commands 2-97; ARP Configuration Commands; The

Motorola Netopia® Router CLI Commands 2-97 ARP Configuration Commands Note: The hw-address format for an Ethernet MAC address is six hexadecimal values between 00 and FF inclusive separated by colons. Thus, the following is an example of a valid Ethernet MAC address hw-address : 00:00:C5:70:00:04 ar...

Page 110 - -98 Command Line Interface Commands Reference; ARP and Bridge timeout settings; This command allows you to set the; Scheduled Connections Configuration Commands; ARP and Bridge Timeout Settings

2-98 Command Line Interface Commands Reference ARP and Bridge timeout settings Note: These commands are suppor ted beginning with Firmware Version 8.4.2. ip arp-timeout timeout This command allows you to set the timeout value for ARP timeout. Default = 600 secs (10 mins); range = 60 secs - 6000 secs...

Page 112 - Default Profile Configuration Commands

2-100 Command Line Interface Commands Reference schedule id periodic interval ( 15min | 30min | 1hour | 2hour | 3hour | 4hour | 4hour | 8hour ) If you specify periodic , this command allows you to specify for how long the system will retr y to bring up the connection. schedule id random interval { x...

Page 113 - Motorola Netopia® Router CLI Commands 2-101; Frame Relay Configuration Commands; number

Motorola Netopia® Router CLI Commands 2-101 When the DHCP client is activated on a RFC1483 MER inter face, it examines the dhcp client mode in the associated connection profile (or the default profile there was no explicitly configured connection profile). If the dhcp client mode specifies standard ...

Page 115 - Motorola Netopia® Router CLI Commands 2-103; Miscellaneous Commands; This command erases the screen.

Motorola Netopia® Router CLI Commands 2-103 Miscellaneous Commands clear This command erases the screen. Miscellaneous Commands clearping [ ip ] { ip-addr | hostname } [ count count ] [ timeout milliseconds ] [ delay milliseconds ] [ size bytes ] [ source ip-addr ] ping oam inter face sdsl id pvc { ...

Page 117 - Motorola Netopia® Router CLI Commands 2-105

Motorola Netopia® Router CLI Commands 2-105 The default count is 5, and the default timeout is 0. receive tftp config [ ser ver-name file-name ] This command allows you to initiate a configuration file upload from the command line inter face. If the TFTP ser ver name and config file name were set pr...

Page 120 - -108 Command Line Interface Commands Reference

2-108 Command Line Interface Commands Reference show version [ cli ] [ firmware ] [ hardware ] [ mib ] [ wan 1 ] [ wan 2 ] This command allows you to display some or all of the router's version strings. If you don't specify anything after the keyword version , the router displays a list of all of th...

Page 122 - -110 Command Line Interface Commands Reference; IP Network Address Translation (NAT) Commands; Overview

2-110 Command Line Interface Commands Reference IP Network Address Translation (NAT) Commands Overview Network Address Translation (NAT) makes use of five basic structures: ■ “public” or externally visible address ranges ■ “map” rules that bind an interior, private address range with a public addres...

Page 123 - Motorola Netopia® Router CLI Commands 2-111

Motorola Netopia® Router CLI Commands 2-111 ip nat public tag static pub-from-address pub-to-address This command allows you to allocate a range of exterior, public addresses for use by Network Address Translation. This range of addresses will be associated one-to-one with private addresses you will...

Page 126 - -114 Command Line Interface Commands Reference; NAT Application Layer Gateway Commands; Beginning with Firmware Version 8.4

2-114 Command Line Interface Commands Reference NAT Application Layer Gateway Commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.2. ip nat alg [ algname ] enable [ yes | no ] show ip nat alg [ algname ] enable no ip nat alg [ algname ] enable These commands ...

Page 127 - Motorola Netopia® Router CLI Commands 2-115; Backup Configuration Commands

Motorola Netopia® Router CLI Commands 2-115 Backup Configuration Commands backup enable { no | manual | automatic | yes } no backup show backup status These commands allow you to set, disable, or display the status of the dial backup feature. Note: yes = automatic Backup Configuration Commands backu...

Page 130 - -118 Command Line Interface Commands Reference; Serial port modem backup configuration commands; The 4000-Series data routers have one serial por t, and its

2-118 Command Line Interface Commands Reference Serial port modem backup configuration commands inter face serial id modem directory-number string no inter face serial id modem directory-number show inter face serial id modem directory-number string These commands allow you to set, disable, or show ...

Page 131 - Motorola Netopia® Router CLI Commands 2-119; RADIUS Authentication Configuration Commands; hostname

Motorola Netopia® Router CLI Commands 2-119 inter face serial id mode { console | modem } show inter face serial id mode These commands allow you to set or show the mode for the specified serial por t, either console or modem . In console mode, the por t automatically detects the baud rate of your t...

Page 132 - -120 Command Line Interface Commands Reference; TACACS+ Authentication Configuration Commands

2-120 Command Line Interface Commands Reference radius-server { 1 | 2 } { ip-address | hostname } [ secret secret ] no radius-server { 1 | 2 } show radius-server [ 1 | 2 ] These commands allow you to specify, delete, or show a RADIUS server either by using an IP address in dotted-quad notation or by...

Page 133 - Motorola Netopia® Router CLI Commands 2-121; IP Filterset Configuration Commands

Motorola Netopia® Router CLI Commands 2-121 index : 1 = primar y ser ver; 2 = alternate ser ver host : IP address or DNS hostname of ser ver secret : RADIUS or TACACS+ shared secret tacacs-plus accounting [ yes | no ] This command enables or disables TACACS+ accounting. IP Filterset Configuration Co...

Page 135 - Hardware Acceleration Configuration Commands; In the unlikely event of a hardware acceleration card failure, the

Motorola Netopia® Router CLI Commands 2-123 ip filterset "Basic Firewall" in 2 protocol tcp source nc destination eq 6000 any Note: Some commands, when dumping existing canned filters, exceed 78 characters and will wrap. To work around this limitation use truncated keywords. no Syntax corres...

Page 136 - -124 Command Line Interface Commands Reference; Global IPSec/IKE Configuration Commands

2-124 Command Line Interface Commands Reference Global IPSec/IKE Configuration Commands IKE Configuration Commands ike phase1 { name | index } [ { yes | no } ] no ike phase1 { name | index } show ike phase1 { name | index } show ike phase1 { name | index } id ike phase1 { name | index } tag string s...

Page 138 - -126 Command Line Interface Commands Reference

2-126 Command Line Interface Commands Reference ike phase1 { name | index } tag string show ike phase1 { name | index } tag These commands name or display the specified IKE Phase1 profile. ike phase1 { name | index } mode { main | aggressive } show ike phase1 { name | index } mode These commands set...

Page 139 - Motorola Netopia® Router CLI Commands 2-127

Motorola Netopia® Router CLI Commands 2-127 ike phase1 { name | index } authentication shared-secret { ascii | hexadecimal } string This command sets the specified IKE Phase1 profile’s shared secret. For security reasons no show variant of this command exists. ike phase1 { name | index } dangling-sa...

Page 141 - Motorola Netopia® Router CLI Commands 2-129; IKE Dead Peer Detection; is set to

Motorola Netopia® Router CLI Commands 2-129 IKE Dead Peer Detection Note: The commands in this section are suppor ted beginning with Firmware Version 8.5.2. ike phase1 { name | index } dead-peer-detection enable { yes | no } show ike phase1 { name | index } dead-peer-detection enable no ike phase1 {...

Page 142 - -130 Command Line Interface Commands Reference; Xauth configuration commands; “RADIUS Authentication Configuration Commands” on page 2-119

2-130 Command Line Interface Commands Reference Xauth configuration commands Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2. ike phase1 { name | index } xauth mode { disabled | client | concentrator } show ike phase1 { name | index } xauth mode These commands...

Page 143 - Motorola Netopia® Router CLI Commands 2-131; Current Restrictions

Motorola Netopia® Router CLI Commands 2-131 Current Restrictions None.

Page 144 - -132 Command Line Interface Commands Reference

Page 145 - Motorola Netopia® Router Connection Profile Commands 3-1; Chapter 3

Motorola Netopia® Router Connection Profile Commands 3-1 Chapter 3 Motorola Netopia ® Router Connection Profile Commands This chapter describes the syntax of the suppor ted command set for creating and modifying Connection Profiles on the Motorola Netopia ® R-series, 4000-series, and 3000 Enterprise...

Page 146 - -2 Command Line Interface Commands Reference; Connection Profile Commands

3-2 Command Line Interface Commands Reference Connection Profile Commands Connection Profile Commands cp { name | index } no cp { name | index } show cp { name | index } cp { name | index } enable { yes | no } no cp { name | index } enable show cp { name | index } enable cp { name | index } tag stri...

Page 147 - Motorola Netopia® Router Connection Profile Commands 3-3

Motorola Netopia® Router Connection Profile Commands 3-3 Connection Profile Commands (continued, 1) show cp { name | index } ip dhcp client status Note: The command above is suppor ted beginning with firmware release 8.5. show cp { name | index } ip dhcp client [ renew | release ] Note: The command ...

Page 148 - -4 Command Line Interface Commands Reference

3-4 Command Line Interface Commands Reference Connection Profile Commands (continued, 2) cp { name | index } ppp authentication type { none | pap | chap } no cp { name | index } ppp authentication type show cp { name | index } ppp authentication type cp { name | index } ppp authentication { send | r...

Page 149 - Motorola Netopia® Router Connection Profile Commands 3-5

Motorola Netopia® Router Connection Profile Commands 3-5 Connection Profile Commands (continued, 3) cp { name | index } telco dn [ 1 | 2 ] string no cp { name | index } telco dn [ 1 | 2 ] show cp { name | index } telco dn [ 1 | 2 ] cp { name | index } telco prefix string no cp { name | index } telco...

Page 150 - -6 Command Line Interface Commands Reference

3-6 Command Line Interface Commands Reference Connection Profile Commands (continued, 4) Connection Profile PPTP Commands cp { name | index } pptp ip par tner ip-addr cp { name | index } pptp ip via ip-addr cp { name | index } pptp authentication type { pap | chap | mschap } cp { name | index } pptp...

Page 151 - Motorola Netopia® Router Connection Profile Commands 3-7

Motorola Netopia® Router Connection Profile Commands 3-7 Connection Profile Commands (continued, 5) Connection Profile RIP-2 MD5 Configuration Commands cp id ip rip auth key id no cp id ip rip auth key id show config cp id ip rip auth key cp id ip rip auth key id star t date date show cp id ip rip a...

Page 152 - -8 Command Line Interface Commands Reference

3-8 Command Line Interface Commands Reference Connection Profile Commands (continued, 6) Connection Profile Stateful Inspection Commands cp { name | index } ip state-insp enable { yes | no | on | of f } no cp { name | index } ip state-insp enable show cp { name | index } ip state-insp enable cp { na...

Page 153 - Motorola Netopia® Router Connection Profile Commands 3-9

Motorola Netopia® Router Connection Profile Commands 3-9 Connection Profile Commands (continued, 7) Connection Profile L2TP Configuration Commands cp { name | index } l2tp ip par tner ip-addr show cp { name | index } l2tp ip par tner cp { name | index } l2tp ip via ip-addr show cp { name | index } l...

Page 154 - -10 Command Line Interface Commands Reference; Note on Connection Profile numbering sequence; Profile 1

3-10 Command Line Interface Commands Reference Note on Connection Profile numbering sequence The Easy Setup Profile is always assumed to be the Primar y Connection Profile, whether or not it exists. The menu console reser ves the index number 1 (one) for the Easy Setup Profile, even if you do not cr...

Page 155 - Motorola Netopia® Router Connection Profile Commands 3-11

Motorola Netopia® Router Connection Profile Commands 3-11 cp { name | index } This command allows you to create a connection profile, which is a structure used to define WAN connections. index can be any value from 1 to 16. The command has no ef fect if the profile already exists. The name of the pr...

Page 156 - -12 Command Line Interface Commands Reference

3-12 Command Line Interface Commands Reference cp { name | index } filterset string no cp { name | index } filterset [ string ] show cp { name | index } filterset These commands allow you to associate a filter set with the a connection profile. The filter set is identified by name. cp { name | index...

Page 157 - Motorola Netopia® Router Connection Profile Commands 3-13

Motorola Netopia® Router Connection Profile Commands 3-13 show cp { name | index } ip dhcp client [ renew | release ] Note: This command is suppor ted beginning with firmware version 8.5. This command allows you to renew or release the ethernet WAN IP address lease being ser ved via DHCP for the spe...

Page 160 - -16 Command Line Interface Commands Reference

3-16 Command Line Interface Commands Reference cp { name | index } telco dn [ 1 | 2 ] string This command allows you to set the profile’s director y number, or number-to-dial (DN). The number can be up to 32 characters in length and may contain non-dialable characters, which are ignored when placing...

Page 162 - -18 Command Line Interface Commands Reference; PPTP commands; or

3-18 Command Line Interface Commands Reference PPTP commands cp { name | index } pptp ip par tner ip-addr This command allows you to specify a PPTP par tner IP address for a par ticular connection profile specified by name or index . cp { name | index } pptp ip via ip-addr This command allows you to...

Page 163 - Motorola Netopia® Router Connection Profile Commands 3-19; Manual connect/disconnect commands

Motorola Netopia® Router Connection Profile Commands 3-19 Manual connect/disconnect commands connect cp { name | index } Invoking this command with a valid, applicable connection profile will cause the router to attempt to make the appropriate connection, using the profile’s settings. A valid, appli...

Page 164 - IP NAT Passthrough Commands

3-20 Command Line Interface Commands Reference cp id ip rip auth key id end date date show cp id ip rip auth key id end date These commands allow you to set or show an end date for the RIP-2 Authentication key(s) on the specified Connection Profile. The acceptable year range is from 1904 – 2039. cp ...

Page 165 - Stateful Inspection Commands; “Stateful Inspection Commands” on page 2-85

Motorola Netopia® Router Connection Profile Commands 3-21 Beginning with Firmware Version 8.3.3, IP Passthrough allows a first come first ser ve mode, which defaults to an all-zeroes MAC address. If you leave the default all-zeroes MAC address, the Router will select the next DHCP client that initia...

Page 166 - L2TP Connection Profile Configuration Commands

3-22 Command Line Interface Commands Reference cp { name | index } ip state-insp xposed-list xposed-list_name no cp { name | index } ip state-insp xposed-list show cp { name | index } ip state-insp xposed-list These commands allow you to set, disable, or show the status of a stateful inspection expo...

Page 167 - GRE Connection Profile Configuration Commands

Motorola Netopia® Router Connection Profile Commands 3-23 cp { name | index } l2tp authentication passphrase string This command sets the local (i.e. LAC/LNS) passphrase. The passphrase must be at least eight characters in length. This value is used to establish the shared secret key that must be pr...

Page 168 - -24 Command Line Interface Commands Reference; CompuServe Login

3-24 Command Line Interface Commands Reference cp { name | index } gre checksum [ yes | no ] show cp { name | index } gre checksum [ yes | no ] These commands allow you to enable, disable, or show whether a GRE tunnel will transmit a checksum field on outgoing GRE packets, when enabled. The Router w...

Page 169 - Motorola Netopia® Router Connection Profile Commands 3-25

Motorola Netopia® Router Connection Profile Commands 3-25 cp { name | index } telco compuserve login { yes | no } show cp { name | index } telco compuserve login no cp { name | index } telco compuserve login These commands set, display, or disable the specified connection profile’s CompuSer ve login...

Page 173 - Motorola Netopia® Router Connection Profile Commands 3-29

Motorola Netopia® Router Connection Profile Commands 3-29 IKE/IPSec Connection Profile Commands cp { name | index } ipsec dead-peer-detection { yes | no } show cp { name | index } ipsec dead-peer-detection no cp { name | index } ipsec dead-peer-detection cp { name | index } ipsec dead-peer-detection...

Page 175 - Motorola Netopia® Router Connection Profile Commands 3-31

Motorola Netopia® Router Connection Profile Commands 3-31 cp { name | index } ipsec dead-peer-detection ping-reply-timeout 1..65535 show cp { name | index } ipsec dead-peer-detection ping-reply-timeout Note: These commands are suppor ted beginning with firmware version 8.2 These commands allow you t...

Page 176 - -32 Command Line Interface Commands Reference

3-32 Command Line Interface Commands Reference cp { name | index } ipsec suite encapsulation { esp | ah | esp+ah } [ encryption { des | 3des | null } ] [ authentication esp { md5 | hmac-md5-96 | sha1 | hmac-sha1-96 } ] [ authentication ah { md5 | hmac-md5-96 | sha1 | hmac-sha1-96 } ] [ compression l...

Page 179 - Motorola Netopia® Router Text Configuration Upload 4-1; Chapter 4; TFTP Text Configuration Upload Overview; SNMP

Motorola Netopia® Router Text Configuration Upload 4-1 Chapter 4 Motorola Netopia ® Router Text Configuration Upload This chapter describes the suppor ted TFTP text configuration upload process. TFTP Text Configuration Upload Overview You can configure many of the basic features of the router by upl...

Page 180 - -2 Command Line Interface Commands Reference; VT100 Command Line Console; “Miscellaneous

4-2 Command Line Interface Commands Reference VT100 Command Line Console The router’s console user inter face comes up in Menu mode by default. In this mode you use the arrow, Escape, and Return/Enter keys to navigate through a series of screens. To invoke the command line at any time, hit Control-N...

Page 181 - Motorola Netopia® Router Text Configuration Upload 4-3; Example Text Configuration File

Motorola Netopia® Router Text Configuration Upload 4-3 Example Text Configuration File The following text file is provided for your use as an example. Make your own appropriate substitutions. Note: All commands, including the last, must be followed by an appropriate end-of-line sequence (Carriage Re...

Page 182 - -4 Command Line Interface Commands Reference

4-4 Command Line Interface Commands Reference ;cp 1 ip nat enabled yes ;cp 1 ip addressing unnumbered ;cp 1 ip addressing numbered ;cp 1 ip address remote 163.176.224.1 ;cp 1 ip mask local 255.255.255.0 ;cp 1 ip mask remote 255.255.255.0 ;cp 1 dle rfc1483 ;cp 1 dle ppp ;cp 1 ppp authentication pap ;...

Page 183 - CLI Error Messages 5-1; Chapter 5; This chapter describes the CLI error messages and their meaning.; Negative errors; Fatal system errors

CLI Error Messages 5-1 Chapter 5 CLI Error Messages This chapter describes the CLI error messages and their meaning. Negative errors Negative errors are fatal. They will terminate processing of a TFTP configuration file upload if the command that caused the error was executed as par t of a TFTP conf...

Page 184 - -2 Command Line Interface Commands Reference; Fatal syntax errors; This error indicates that you entered an unrecognized command.

5-2 Command Line Interface Commands Reference Fatal syntax errors ; error -101: no match This error indicates that you entered an unrecognized command. ; error -120: syntax error This error indicates that you entered a command with a syntactic error for which the command line processor was unable to...

Page 186 - -4 Command Line Interface Commands Reference

5-4 Command Line Interface Commands Reference Example: #ping 192.168.1.1 count abc ; error -126: number required ; error -127: index out of bounds This error indicates that an out of range value was specified in a command that requires an index, such as attempting to access connection profile 17 on ...

Page 190 - error -150 not allowed for this particular item

5-8 Command Line Interface Commands Reference ; error -147: too many tokens This error indicates that you entered more items than are allowed as par t of the command. This could result from failing to quote a string value that contains one or more spaces. Example: #cp 1 telco dn 555 1212 ; error -14...

Page 192 - -10 Command Line Interface Commands Reference; Voice command errors

5-10 Command Line Interface Commands Reference Voice command errors ; error -250: bad extension number ; error -251: extension number does not exist ; error -252: extension number already exists ; error -253: wrong Auto-Attendant time ; error -254: directory number doesn't exist ; error -255: port h...

Page 193 - CLI Error Messages 5-11; Fatal access control errors; #show cp 1 ppp authentication send password; Positive errors; error 1: not supported with current hardware; interface isdn 1 mode idsl-cmn

CLI Error Messages 5-11 ; error -268: invalid digit ; error -269: only single digit allowed Fatal access control errors ; error -400: access denied This error indicates that you attempted to display an attribute that may not be displayed, or to change an attribute to which you do not have access. Ex...

Page 194 - error 106: arp cache is full delete an entry to make room

5-12 Command Line Interface Commands Reference ; error 102: can't delete This error indicates that you attempted to delete an item that doesn't exist. Example: #show interface ethernet 0 address-serve helper interface ethernet 0 address-serve helper 10.0.0.1 interface ethernet 0 address-serve helper...

Page 195 - Index of Commands

Index-13 Index of Commands A ALANs 2-16 ip nat alg 2-114 no ip nat alg 2-114 show ip nat alg 2-114 arp 2-97 authprofile 2-39 authprofile id alternate secret 2-40 authprofile id alternate ser ver 2-39 authprofile id radius identifier 2-40 authprofile id radius por t 2-40 authprofile id remote secret ...

Netopia CLI 874 - Manual

Table of Contents:

Summary

Other Netopia Models