Netgear FSM726 - Manuals

Netgear FSM726 – Manual in PDF format online.

Manuals:

Manual

Manual Netgear FSM726

Summary

Page 4 - CONTENTS

Page 3 of 3 CONTENTS CHAPTER 1: INTRODUCTION ...................................................................................................................................5 Overview ....................................................................................................................

Page 6 - CHAPTER 1: INTRODUCTION; Overview

Page 5 of 5 CHAPTER 1: INTRODUCTION Congratulations on your purchase of a NETGEAR Model FSM726 Managed, Fast Ethernet Switch! Your NETGEAR Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for users who want ease of use along with the power of management to eli...

Page 7 - Features

Page 6 of 6 Features • The following list identifies the key features of the NETGEAR Model FSM726 Managed Switch. • Twenty-four 10/100 Mbps auto sensing Fast Ethernet switching ports • Two Gigabit Ethernet ports that can be used either through the built-in RJ-45 ports for 10/100/1000 Mbps connectivi...

Page 10 - CHAPTER 2: PHYSICAL DESCRIPTION; Front and back panels; Front and Back Panels

Page 9 of 9 CHAPTER 2: PHYSICAL DESCRIPTION This chapter describes the hardware features of the NETGEAR Model FSM726 Managed Switch. Topics include: Front and back panels 10/100 Mbps auto-sensing RJ-45 ports Gigabit Ethernet Ports (RJ-45 and GBIC module bay) LED descriptions Console port Reset Butto...

Page 11 - Your NETGEAR Model

Page 10 of 10 • After ascertaining this information, the switch automatically configures the RJ-45 port to enable communications with the attached device, without requiring user intervention. In this way, the Auto Uplink technology compensates for setting uplink connections, while eliminating concer...

Page 13 - Note; Reset Button

Page 12 of 12 In addition to using the console port, you can manage the switch using a Web browser or a Simple Network Management Protocol (SNMP) management program. Note : You must use the console port for the initial management configuration. For more information about console-port connections, se...

Page 14 - CHAPTER 3: INSTALLATION; Step 1: Preparing the Site; Characteristics; Environmental

Page 13 of 13 CHAPTER 3: INSTALLATION This chapter describes the installation procedures for your NETGEAR Model FSM726 Managed Switch. Switch installation involves the following steps: Step 1: Preparing the site Step 2: Installing the switch Step 3: Checking the installation Step 4: Applying AC powe...

Page 15 - Step 2: Installing the Switch; Installing the Switch on a Flat Surface; Attach the supplied mounting brackets to the side of the switch.; Step 3: Checking the Installation; Inspect the equipment thoroughly.; Step 4: Applying AC Power

Page 14 of 14 Step 2: Installing the Switch You can install your NETGEAR Model FSM726 Managed Switch on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of the four concave...

Page 16 - When you apply power, the; LED will change to Green and the switch is functional and ready to; Power; Step 5: Connecting Devices to the Switch; Step 6: Installing a GBIC Module; To install a GBIC module:

Page 15 of 15 cord, select an AC outlet that is not controlled by a wall switch, which can turn off power to the switch. After you select an appropriate outlet, use the following procedure to apply AC power. 1. Connect the female end of the supplied AC power adapter cable to the power receptacle on ...

Page 17 - Macintosh users can use ZTerm.

Page 16 of 16 2. After the switch has been configured for management (Step 7), use one of the management interfaces (web browser or console interface) to configure the port with the GBIC module installed to the GBIC option. 3. To install a second Gigabit Ethernet module, repeat this procedure using ...

Page 18 - not, you will have to manually assign an IP address. To do so,

Page 17 of 17 Parity: none Stop bit: 1 Flow control: none 4. Hit the return key, and the below screen should appear. Figure 3-4. System Information 5. If you want to use your web browser, or telnet session to manage your switch, note the IP address on this page. To use your web browser, simply type ...

Page 20 - APPENDIX A: TECHNICAL SPECIFICATIONS; Network Protocol and Standards Compatibility

Page 19 of 19 APPENDIX A: TECHNICAL SPECIFICATIONS This appendix provides technical specifications for the NETGEAR Model FSM726 Managed Switch. Network Protocol and Standards Compatibility IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow co...

Page 22 - APPENDIX B: TROUBLESHOOTING; Troubleshooting chart; Troubleshooting Chart; Link; Additional Troubleshooting Suggestions

Page 21 of 21 APPENDIX B: TROUBLESHOOTING This chapter provides information about troubleshooting the NETGEAR Model FSM726 Managed Switch. Topics include: o Troubleshooting chart o Additional troubleshooting suggestions Troubleshooting Chart Table B-1 lists symptoms, causes, and solutions of possibl...

Page 24 - APPENDIX C: Default Settings

Page 23 of 23 APPENDIX C: Default Settings This appendix provides the default settings for the NETGEAR Model FSM726 Managed Switch. Feature FSM726 Default Setting Port Speed Auto-negotiation Port Duplex Auto-negotiation Flow Control (half duplex) Enabled Flow Control (full duplex) Enabled Broadcast ...