Netgear FS2105 - Manuals - manualsarea.com

Page 2 - Model FS2105/FS2108 Fast Ethernet Switch Installation Guide; The NETGEAR; Model FS2105 Fast Ethernet Switch; and; Switch; LEDs; This table describes the activity for LEDs on either the; Label; Green; Introduction

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide The NETGEAR ™ Model FS2105 Fast Ethernet Switch and Model FS2108 Fast Ethernet Switch simplify 10/100 megabits per second (Mbps) switching technology so that small businesses can enjoy the same high-performance networking facilities thatthe...

Page 3 - Network Ports; Applications

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide Network Ports Ports 1 through 4 for the Model FS2105 Fast Ethernet Switch and ports 1 through 7 for the Model FS2108 Fast Ethernet Switch are permanently configured for normal wiring for connection to a PC or a router. They are all 10/100 M...

Page 4 - Expanded Workgroup; Mark the wall to match the location of the mounting holes.; Installing the Switch

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide Expanded Workgroup Both the Model FS2105 Fast Ethernet Switch and the Model FS2108 Fast Ethernet Switch can be used to connect multiple PC workgroups. There are three ways to install either the Model FS2105 Fast Ethernet Switch or the Model...

Page 5 - Magnet Mounting the Switch; Inserting the Magnet; To connect devices to the switch:; Connect the switch for specific devices:; Ethernet specifications limit the total cable length between; Connecting the Network

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide Magnet Mounting the Switch Inserting the Magnet Removing the Magnet To connect devices to the switch: 1. Connect the devices to the 10/100 Mbps ports on the switch, using category 5 UTP cable with an RJ-45 plug. 2. Connect the switch for sp...

Page 6 - When power has been applied to the switch:; Symptom; Verifying Installation

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide When power has been applied to the switch: • The green Pwr (power) LED on the front panel is on. • The green Link/Activity LED on each connected port is on. When the switch is connected and operating, refer to the table in “LEDs” forinforma...

Page 7 - Type; Network Interface; Technical Specifications

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide For more information about customer support and technical specifications, referto the NETGEAR Web site: http://www.NETGEARinc.com/products Type Specification Standards Compatibility IEEC 802-3, 10BASE-T EthernetIEEC 802-3u, 100BASE-T Ethern...

Page 8 - Trademarks; EN 55 022 Declaration of Conformance

Model FS2105/FS2108 Fast Ethernet Switch Installation Guide © 1999 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of NETGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks and registered trademarks are the property of the...