Netgear FA510 - Manuals - manualsarea.com

Page 2 - Model FA510 Network Card Installation Guide; Verify PC Requirements; Start Here

Model FA510 Network Card Installation Guide Instructions in this guide are for users of Windows ® who are installing the Model FA510 Network Card. For instructions on installing and verifying theWindows network driver, refer to “Install the Windows Network Driver” on theother side of this guide. The...

Page 3 - Insert the Model FA510 Network Card into the CardBus slot as; Install the Network Card

Model FA510 Network Card Installation Guide The Model FA510 Network Card is hot swappable, which means it can beinserted into a PC that is either turned off or powered on. 1. Insert the Model FA510 Network Card into the CardBus slot as illustrated in the figure. Some PCs have two CardBus slots. The ...

Page 4 - Using a UTP cable, connect any port on the hub to the port on the RJ-; Connect the Network Cables

Model FA510 Network Card Installation Guide 1. Using a UTP cable, connect any port on the hub to the port on the RJ- 45 adapter cable. 2. To connect the network cables, follow the illustration below. Note: One of the ports on NETGEAR hubs is switchable between Normal (MDI-X) and Uplink (MDI) with a ...

Page 5 - Turn on the power to the computer and start Windows 98.; The new hardware is found.; Install the Network Driver

Model FA510 Network Card Installation Guide This guide provides you with instructions for installing the Windows NetworkDriver. The steps given in these instructions are for users of Windows 98. If you are using Windows 95, read these instructions thoroughly for an overviewof the steps that are nece...

Page 6 - Select “Floppy disk drives.”

Model FA510 Network Card Installation Guide 3. Select “Search for the best driver.....” Click on “Next.” 4. Select “Floppy disk drives.” Select “Specify a Location” and make sure the location is “A:\.” Insert the Drivers and Diagnostics Disk into the floppy drive, and click on “Next.” < B a c k N...

Page 7 - I n s e r t D i s k

Model FA510 Network Card Installation Guide 5. Click on “The updated driver....” and click on “Next.” 6. Make sure that the location and the correct driver are displayed (for example, A:\NETFA510.INF). Click on “Next.” 7. Click on “OK.” < B a c k N e x t > C a n c e l V i e w L i s t . . . A d...

Page 8 - Insert the Drivers and Diagnostics Disk and click on “OK.”

Model FA510 Network Card Installation Guide 8. Insert the Drivers and Diagnostics Disk and click on “OK.” 9. Click on “OK.” 10. Insert the Windows 98 CD-ROM. Make sure the designated path to the Windows 98 CD-ROM is displayed in the “copy files from” prompt line (for example, D:\WIN98). Click on “OK...

Page 9 - Click on “Yes” to restart your computer.; N e t w o r k

Model FA510 Network Card Installation Guide 11. Click on “Finish.” 12. Be sure to remove the Drivers and Diagnostics Disk and the Windows 98 CD-ROM before restarting your computer. Click on “Yes” to restart your computer. 13. Proceed to “Verify Installation.” < B a c k F i n i s h C a n c e l U p...

Page 10 - Click on “Device Manager.”; Verify Installation

Model FA510 Network Card Installation Guide 1. Double-click on “My Computer” on your desktop, double-click on “Control Panel,” and then double-click on “System.” 2. Click on “Device Manager.” Verify Installation

Page 13 - Technical Specifications

Model FA510 Network Card Installation Guide Model FA510 Network Card Standards Compatibility NetWare tested and approved Microsoft ® Windows 95, Windows 98, Windows NT ® compatible IEEE 802.3i, 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Interface Options RJ-45 connector IRQ Options Assig...

Page 14 - Certificate of the Manufacturer/Importer

Model FA510 Network Card Installation Guide © 1999 by NETGEAR, Inc. All rights reserved. Trademarks Bay Networks is a registered trademark of Bay Networks, Inc. NETGEAR is a trademark of BayNetworks, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. All othe...

Page 15 - A Bay Networks Company

Model FA510 Network Card Installation Guide NETGEAR, Inc. A Bay Networks Company 4401 Great America Parkway Santa Clara, CA 95054 USA Phone: 888-NETGEAR http://WWW.NETGEARinc.com *m-FA510NA-0*