Napoleon BGNV42P - Manuals - manualsarea.com

Page 2 - • Do not strike or slam shut the fireplace glass door.; TABLE of CONTENTS; PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE

2 W415-0377 / C / 09.23.05 PG 2-4 INTRODUCTION WarrantyGeneral InstructionsGeneral InformationCare of Glass & Plated Parts 5 VENTING Vent Safety SwitchHi Limit SwitchVenting Action Check 6-7 INSTALLATION Gas InstallationFramingNailing Tab InstallationMantle Clearances 8-9 FINISHING Louvre Bracke...

Page 4 - Use only accessories designed for and; to conform with; Maximum input for the fireplace is 28,500 BTU/h for; GENERAL INSTRUCTIONS; FIGURE 1

4 W415-0377 / C / 09.23.05 Do not use abrasive cleaners to clean plated parts. Bufflightly with a clean dry cloth. The fireplace is factoryequipped with 3/16" thick tempered glass. Use only replace-ment glass available from your Napoleon dealer. Do not substitute materials. Clean the glass after...

Page 5 - FIGURE 5; VENTING; VENT SAFETY SWITCH

5 W415-0377 / C / 09.23.05 This is a vented appliance and must be connected to achimney in accordance with the current installation codes.In absence of local codes, install to the current NationalF u e l G a s C o d e , A N S I Z 2 2 3 . 1 , o r t h e c u r r e n tCAN/CGA B149, Installation Codes. T...

Page 6 - Proceed once the vent installation is complete.; WIRE SIZE; Do not use open flame.; FIGURE 7; FIGURE 6; GAS INSTALLATION; INSTALLATION; FIGURE 9

6 W415-0377 / C / 09.23.05 It is best to frame your fireplace after it is positioned. Use2x4's and frame to local building codes. FIGURE 7-9. Note: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fireplace body,it is recommended that the walls of ...

Page 7 - NAILING TAB INSTALLATION

7 W415-0377 / C / 09.23.05 NAILING TAB 1) Attach the nailing tabs to the corner posts using the 2 sheet metal screws sup-plied. Secure through the cen-tre of the top and bottom slotsi n t h e n a i l i n g t a b a n d t h e nthrough the existing holes inthe corner posts. If there are no existing hol...

Page 8 - LOWER LOUVRES; LOGO PLACEMENT; LOGO; Align the holes in the lou-; GDL42 LOUVRE INSTALLATION; FINISHING; L42 LOUVRE INSTALLATION

8 W415-0377 / C / 09.23.05 The upper louvres must be removed to allow the door to beremoved. Release the two door latches, located acrossthe top of the door and lift off the lower door bracket. Insert the upper louvres intothe slots on both brackets. Attach e a c h h i n g e o n t h elower louvre as...

Page 9 - PHAZER; The ember material; GLOWING EMBERS; LOG PLACEMENT

9 W415-0377 / C / 09.23.05 PHAZER TM logs and glowing embers, exclusive to Napoleon Fireplaces, provide a unique and realistic glowing effect thatis different in every installation. Take the time to carefullyposition the glowing embers for a maximum glowing effect.Log colours may vary. During the in...

Page 10 - INSTALLATION TO BE DONE BY A QUALIFIED INSTALLER; red; OPTIONAL BLOWER INSTALLATION

10 W415-0377 / C / 09.23.05 Attach the connectors from the black and white wires to thethermodisc and secure the thermodisc bracket to the secur-ing stud at the bottom left of the unit using a lock washer andwing nut. Ensure that the thermodisc touches the firebox wall. Attach the connectors from th...

Page 11 - OPTIONAL FAN INSTALLATION

11 W415-0377 / C / 09.23.05 Attach and secure the sensor assembly bracket to the se-curing stud located next to the receptacle/junction box atthe bottom left of the unit using the lock washer and wingnut. Ensure that the thermodisc touches the firebox wall. Plug the power cord back into the receptac...

Page 12 - OPERATION / MAINTENANCE; OPERATING INSTRUCTIONS; FOR YOUR SAFETY READ BEFORE LIGHTING:

12 W415-0377 / C / 09.23.05 • Turn off all gas to the fireplace. • Open windows. • Do not try to light any appliance. • Do not touch any electric switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's instructions. • If...

Page 13 - at least once a year; NG; MAINTENANCE; ADJUSTMENTS; PILOT BURNER ADJUSTMENT; VENTURI

13 W415-0377 / C / 09.23.05 Adjust the pilot screw to provide properly sized flame. Turnin a clockwise direction to reduce the gas flow. Closing the air shutter will cause a more yellow flame, butcan lead to carboning. Opening the air shutter will cause amore blue flame, but can cause flame lifting ...

Page 14 - REPLACEMENTS; REPLACEMENT PARTS

14 W415-0377 / C / 09.23.05 # PART No. DESCRIPTION 25 GDL42K LOUVRE KIT - UPPER & LOWER - BLACK 25 GDL42PB LOUVRE KIT - UPPER & LOWER - POLISHED BRASS 25 GDL42SS LOUVRE KIT - UPPER & LOWER - BRUSHED STAINLESS STEEL 26 L42K LOUVRE KIT - UPPER & LOWER - BLACK 26 L42PB LOUVRE KIT - UPPE...

Page 15 - TROUBLE SHOOTING GUIDE; SYMPTOM

15 W415-0377 / C / 09.23.05 Pilot will not light. - check if pilot can be lit by a match- check that the wire is connected to the push button ignitor.- check if the push button ignitor needs tightening.- replace the wire if the wire insulation is broken or frayed.- replace the electrode if the ceram...