Murphy ST8 - Manuals

Murphy ST8 – Manual in PDF format online.

Manuals:

Manual Murphy ST8

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - MOUNTING; Dimensions; APPLYING PREPRINTED LABELS; Gimbal Mounting Bracket Hole Dimensions

ST-94112N page 2 of 4 MOUNTING 1. Cut a hole in the panel according to the mounting hole dimen- sions shown below. 2. Install the flush mount mounting bracket on the TATTLETALE ® . 3. Insert the TATTLETALE ® into the hole through the front of the panel. 4. Install the four 6-32 x 5/8 screws supplied...

Page 3 - ELECTRICAL; Solenoid Valve; DO NOT; Typical Wiring; Below is a typical wiring diagram for the ST8 TATTLETALE

ST-94112N page 3 of 4 ELECTRICAL A B Battery Run Remove jumper from terminals 12 and 13 and set individual sensor Lockout Switch for a 25 to 35 second lockout time delay duringstartup (see page 4 Setting Lockout Switches ). Sensor Lockout Switches 5 9 13 10 11 12 14 A B 6 A B 7 A B A B A B A B A B 8...

Page 4 - BASIC OPERATION; Figure 6; Setting Lockout Switches; Figure 7; Lockout; Figure 7; Warranty

ST-94112N page 4 of 4 BASIC OPERATION ST8 1. Apply power to the ST8 TATTLETALE ® (terminals 13 and 14). 2. The “POWER ON” and “RUN” LED light will switch On. The“POWER ON” LED indicates power has been applied to the ST8.The “RUN” LED indicates the internal relay is in the operating mode. 3. The lock...

Murphy Manuals