Murphy SM3 - Manuals

Murphy SM3 – Manual in PDF format online.

Manuals:

Manual Murphy SM3

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - ferrule nut and fitting.; C. Mark tubing at top of fitting–raise tub-; above the compression nut.; SM1 Model; SM1 Model; typical Installation; SM Series Typical Installation; Compression; Tank Plug; Detail A

INSTALLATION 2 Installing a Tank Plug Kit (all models) The tank plug kit includes 12 ft. (3.6 m) x 1/4 in. (6 mm) dia. stainless steel tube and fittings.Tank plug is available in 2 NPT or 4 NPT. 1. Locate tank(s) service cover and installa UTKN tank plug kit for each tank.Necessary hardware is avail...

Page 3 - INSTALLATION; To Tank 1 Plug; Pump Assembly; Detail D; Read Button; Pointer; SM and SMVR models are precalibrated in feet of; Detail E; SM Panel Tubing Configuration

Installing the CKBO Check Valve The optional CKBO check valve is designedto prevent product from backing up into thegage(s). We recommend installing the CKBO valve at top of the tank plug asfollows (refer to Detail C): 1. Determine a location for the valve. Use of sealant on all fittingthreads is st...

Page 4 - Operation Sequence; Make sure that the pump assembly is connected to a power source,; Warranty; Details are available on request and are packed with each unit.; Make sure SM Series system is completely; Service Parts and Accessories; Frank W. Murphy Manufacturer

INSTALLATION Continued 4 Operation Sequence 1. Make sure that the pump assembly is connected to a power source, either 120 VAC or 230 VAC according to the pump model used. 2. Depress the read button, located next to the gage(s) and hold until the gage pointer stops traveling across the scale. See Fi...

Murphy Manuals