Murphy Series LM300 - Manuals

Murphy Series LM300 – Manual in PDF format online.

Manuals:

Manual

Manual Murphy Series LM300

Summary

Page 2 - LM300 Series Enclosures; Mounting Brackets with Hardware; pipe bracket; Pipe Bracket Mounting; Install the pipe bracket to the LM300 using two 3/8-16 UNC x 1 inch; tighten the adjustment screws too tightly because; Mounting with Universal Bracket; Deck Mounting; Mount the LM300 to the universal bracket using two 3/8-16 UNC x 1; DO NOT; tighten the; Figure 1B; Figure 2A; Additional Hardware

LM-92164N page 2 of 4 DIMENSIONS TYPICAL INSTALLATION 8-1/4 in. (210 mm) Crankcase Vent 1/2-14 NPT Oil Inlet Connection * 1/2-14 NPT with removable screen 6 in. (152 mm) Test Knob Electrical Conduit 1/2-14 NPT Monitoring Port Connection 3 places, 3/4-14 NPT * Applies to level maintaining models only...

Page 3 - Connecting Fittings and Hoses; NOTE; Switch Test; DO NOT FORCE; Figure 3B; Figure 3A; Figure 4; Overfill condition can be caused by excessive

LM-92164N page 3 of 4 TYPICAL INSTALLATION continued Crankcase (Oil Pan) Mounting 1. Install the universal bracket to the crankcase using the existing crankcase bolts (Figure 3A). Crankcase bolt diameter must be no largerthan 7/16 inch (11 mm). NOTE: Check clearance between crankcase and mounting br...

Page 4 - that; Figure 9; shows that if level continues to drop into the low-low zone, a; DISCONNECT ALL ELECTRICAL POWER BEFORE CONNECTING ANY WIRES.; Warranty

LM-92164N page 4 of 4 OPERATING RANGES OF SWITCHES 3/4 in. (19 mm) Normal Operating Range Low Zone Shutdown or Alarm High Zone Shutdown or Alarm 3/8 in. (10 mm) 3/8 in. (10 mm) 3/4 in. (19 mm) Normal Operating Range Low Zone AlarmLow-Low Zone Shutdown 3/4 in. (19 mm) 3/8 in. (10 mm) 1/4 in. (6 mm) S...