Murphy RP2309B - Manuals

Murphy RP2309B – Manual in PDF format online.

Manuals:

Manual Murphy RP2309B

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Solenoid Dimensions; Solenoid Shown with Plunger Seated (Coil Energized); Watts Power/Cold Force in Pounds at 100% Voltage/Inches Stroke; Typical; CAUTION

1/2 in. (13 mm) 1-19/32 in. (40 mm) 2-13/16 in. (72 mm) 5 in. (127 mm) Boot Internal † 1/4-28 1 in. (25 mm) 3/32 in.(2 mm) 2 in. (51 mm) 2-1/2 in. (64 mm) 2-7/16 in. (62 mm) 9/32 in.(7 mm) 1-5/8 in.Diameter NOTE: Remove or pierce decal to install shaft. 1/4-28 Shaft w/nut shown installed (is supplie...

Page 3 - Typical Wiring Diagrams; The solenoid housing is hot to the; Typical time-delayed shutdown using a 760A magnetic switch; On certain starter solenoids/contactor relays,; Typical time-delayed shutdown using a 518PH magnetic switch

RPS-00092B page 3 of 4 Mechanical Installation 1. Bolt the solenoid securely to the mounting bracket. 2. Connect linkage and check for binding. Plunger should movefreely throughout the complete stroke and be allowed to“bottom” at the internal stop of the solenoid. DO NOT MOUNT WITH BOOT DOWN. DO NOT...

Page 4 - Solenoid; SD85 Terminal Block; Accessories; Wires designated 10 ga. must be

RPS-00092B page 4 of 4 1-1/4 in. (32 mm) 3/8 in. (9 mm) 1/4-28 Threads 1-1/4 in.(32 mm) 3/8 in. (9 mm) 2 in. (51 mm) 1/4-28 Threads 1/4-28 Threads 1-1/2 in. (38 mm) RPS Linkage Parts and Assemblies Threaded Rod(40-05-0315) RPS 90° Ball Joint(00-00-2458) RPS In-Line Ball Joint (00-00-2457) SD85: Sole...

Murphy Manuals