Murphy PV-101 - Manuals

Murphy PV-101 – Manual in PDF format online.

Manuals:

Manual

Manual Murphy PV-101

Summary

Page 2 - Warranty; - A limited warranty on materials and

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time. The latest version of this manual can be found at www.fwmurphy.com. Warranty - A limited warranty on materials and workmanship is given with this...

Page 3 - Table of Contents

Table of Contents Introduction ............................................................................. 1 Engine and Transmission Parameters 2 Faceplate Features 3 Navigation and Keypad Functions 4 Operation ................................................................................. 9 Pow...

Page 5 - Introduction

00-02-0605 - 1 - Rev 09-10-08 Introduction Congratulations on purchasing your PowerView display, a multifunction tool that provides a window into the many parameters and service codes of modern electronic engines and transmissions. This guide is intended to help you set up your PowerView display and...

Page 6 - Engine and Transmission Parameters

00-02-0605 - 2 - Rev 09-10-08 Engine and Transmission Parameters The following are some of the engine and transmission parameters which may be displayed in standard or metric units as well as in English, Spanish, French, Italian, or German languages (when applicable, consult engine or transmission m...

Page 7 - Faceplate Features

Page 8 - Navigation and Keypad Functions; Menu; – Enter or exit menu screens.; Left Arrow; – Scroll the screen or move the; Right Arrow; – Scroll the screen and move; Enter Key; – Select a menu or parameter or

00-02-0605 - 4 - Rev 09-10-08 Navigation and Keypad Functions The keypad on the PowerView display is a capacitive touch sensing system. There are no mechanical switches to wear or stick. When a key is touched, feedback is provided by the screen flashing. The keys on the keypad perform the following ...

Page 9 - Basic Navigation; is pressed, the main menu items are

00-02-0605 - 5 - Rev 09-10-08 Basic Navigation 1. When Menu is pressed, the main menu items are displayed.

Page 10 - the; Arrow Keys; will move the selection bar to

00-02-0605 - 6 - Rev 09-10-08 2. Touching the Arrow Keys will move the selection bar to other menu items.

Page 11 - Certain menus have multiple pages of items. Scrolling

00-02-0605 - 7 - Rev 09-10-08 3. Certain menus have multiple pages of items. Scrolling past the top item or bottom item on the current page will reveal other menu items on additional pages.

Page 13 - Operation; When power is first applied to the display, the Murphy

00-02-0605 - 9 - Rev 09-10-08 Operation PowerView Menus (First Time Start Up) 1. When power is first applied to the display, the Murphy logo appears.

Page 15 - Once the engine has started, the single engine; Right Arrow Key; will display the coolant

00-02-0605 - 11 - Rev 09-10-08 3. Once the engine has started, the single engine parameter appears with the engine RPM displayed. Pressing the Right Arrow Key will display the coolant temperature. The screen can be changed to other parameters by pressing Menu .

Page 16 - Setting Up the Display; Use Defaults; – This option contains a set of engine; Custom Setup; – This option allows for the modification of; Automatic Scan; – Selecting the scan function will cause

00-02-0605 - 12 - Rev 09-10-08 Setting Up the Display The screen may be configured to display a single engine parameter (1-up display), or four parameters at once (4-up display). Default options are provided or you may customize the display by selecting the parameters you want. 1-Up Display Three op...

Page 17 - -Up Display Settings

00-02-0605 - 13 - Rev 09-10-08 1-Up Display Settings 1. Touch Menu and use the Arrow Keys to highlight SETUP 1-UP DISPLAY, then press Enter . 2. To select USE DEFAULTS, highlight the option and press Enter . A message indicating “RESTORED TO DEFAULTS” is displayed. 3. To select CUSTOM SETUP, highlig...

Page 20 - and a list of parameters will appear.; to highlight the new parameter to; Enter; to return to the 4-UP CUSTOM SETUP

00-02-0605 - 16 - Rev 09-10-08 5. Touch Enter and a list of parameters will appear. The parameter that is highlighted is the selected parameter for the screen. The number to the right of the parameter indicates the quadrant in which it is displayed. 1 = upper left quadrant 2 = lower left quadrant 3 ...

Page 22 - Main Menu Options; allow you to; selects the highlighted option.; Selecting a Language; Request stored fault code information.; Engine Configuration Data*; * This function may not be supported by all manufacturers.

00-02-0605 - 18 - Rev 09-10-08 Main Menu Options This section describes the features listed on the main menu of the PowerView. These menu options are displayed whenever you touch Menu . The Arrow Keys allow you to scroll the items, and Enter selects the highlighted option. Selecting a Language From ...

Page 23 - F or; Utilities

00-02-0605 - 19 - Rev 09-10-08 Backlight Adjustment ADJUST BACKLIGHT allows you to select the desired backlight intensity. Contrast Adjustment From ADJUST CONTRAST, you may select the desired contrast intensity. Select Units From SELECT UNITS, you may select how information is displayed. ENGLISH for...

Page 25 - Auxiliary Gage Fault; NOTE; : The fault can only be cleared by correcting the; Active Fault Codes

00-02-0605 - 21 - Rev 09-10-08 Auxiliary Gage Fault Murphy’s PVA Gages can be attached to the PowerView. If an auxiliary gage should fail, the 1-up or 4-up display will be replaced with the fault message “GAGE NOT RESPONDING”. NOTE : The fault can only be cleared by correcting the cause of the fault...

Page 26 - Acknowledging Fault Codes; To acknowledge and hide the fault and return to the; to redisplay the hidden fault. Touch

00-02-0605 - 22 - Rev 09-10-08 Acknowledging Fault Codes 1. To acknowledge and hide the fault and return to the 1-up or 4-up display, touch Enter . The display will return to the 1-up or 4-up display, but the display will contain the shutdown icon. 2. Touch Enter to redisplay the hidden fault. Touch...

Page 27 - Utilities Menu; GAGE DATA - View information for optional connected

00-02-0605 - 23 - Rev 09-10-08 Utilities Menu The following steps take place starting at the UTILITIES menu option. 1. GAGE DATA - View information for optional connected PVA gages. 2. REMOVE ALL GAGES - Reset the PowerView's gage memory. 3. SOFTWARE VERSION - View the PowerView's software version. ...

Page 29 - Select either the SLAVE ACTIVE (SCADA or remote; to toggle between master and

00-02-0605 - 25 - Rev 09-10-08 Modbus ® Setup 1. From the UTILITIES menu, select MODBUS SETUP. 2. Select either the SLAVE ACTIVE (SCADA or remote Modbus master) or MASTER ACTIVE (auxiliary gages) modes. Touch Enter to toggle between master and slave. 3. Select SERIAL PORT SETUP (slave mode only), th...

Page 30 - Selecting Engine ECU; From the UTILITIES menu, choose SELECT ENGINE; Once the target address is displayed, press

00-02-0605 - 26 - Rev 09-10-08 Selecting Engine ECU 1. From the UTILITIES menu, choose SELECT ENGINE ECU. 2. The message “LISTEN TO ECU: ALL” is displayed as the default setting, and indicates the PV101 is listening to all devices on the network. 3. To change the setting to a specific address, press...

Page 31 - Troubleshooting; “WAIT TO START PREHEATING” is displayed

00-02-0605 - 27 - Rev 09-10-08 Troubleshooting “WAIT TO START PREHEATING” is displayed The ECU is broadcasting a 'Wait To Start' message. Engine manufacturers typically recommend against starting the engine while the ECU is broadcasting this message. Once the ECU stops broadcasting this message, thi...

Page 33 - key for approximately 5

00-02-0605 - 29 - Rev 09-10-08 “DATA ERROR” is displayed in place of a parameter value The ECU is sending a message that there is a data error with this parameter. Or (PV101 only) FUEL LEVEL has been selected for display, ANALOG INPUT has been set to FUEL LEVEL, but no Murphy Fuel Sender has been co...

Page 34 - NOTES