Multiquip MVC-88GHW - Manuals

Page 2 - PROPOSITION 65 WARNING

l PAGE 2 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) PROPOSITION 65 WARNING

Page 3 - NOTES

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 3 NOTES

Page 4 - Component Drawings; TABLE OF CONTENTS; Specification and part number are subject to

l PAGE 4 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) Honda GX160K1QMX2 Engine Cylinder Head Assembly .................................... 38-39Cylinder Barrel (Recoil) Assembly ..................... 40-41Crankcase Cover Assembly ............................... 42-...

Page 5 - PARTS ORDERING PROCEDURES; Ordering parts has never been easier!; Choose from three easy options:; Order via Internet; Order; Order via Fax

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 5 PARTS ORDERING PROCEDURES www .multiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: ❒ Dealer Account Number ❒ D...

Page 6 - SAFETY INFORMATION; SAFETY MESSAGES; DANGER

l PAGE 6 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the s...

Page 7 - GENERAL SAFETY

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 7 SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective ...

Page 8 - COMPACTOR SAFETY; ENGINE SAFETY

l PAGE 8 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) SAFETY INFORMATION COMPACTOR SAFETY DANGER NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death. WARN...

Page 9 - FUEL SAFETY

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 9 SAFETY INFORMATION FUEL SAFETY DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. DO NOT start the engin...

Page 10 - TRANSPORTING SAFETY; ENVIRONMENTAL SAFETY

l PAGE 10 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration...

Page 11 - SPECIFICATIONS

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 11 ) r o t c a p m o C ( s n o i t a c i f i c e p S . 1 E L B A T s l e d o M W H G 8 8 - C V M / H G 8 8 - C V M e c r o F l a g u fi r t n e C ) g k 9 . 4 6 5 , 1 ( . s b l 0 5 4 , 3 s n o it a r b i V f o r e b ...

Page 12 - Oil Alert; Controls; GENERAL INFORMATION

l PAGE 12 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) Definition of Plate Compactor The Mikasa MVC-88GH/GHW is a walk behind, plate compactordesigned for the compaction of sand, mixed soils and asphalt.This plate compactor is a powerful compacting tool capable ofa...

Page 13 - COMPONENTS

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 13 Figure 1. Plate Compactor Controls Figures 1 shows the location of the basic controls andcomponents of the MVC-88 Plate Compactor. The function ofeach control is described below: 1 . Water Tank Cap – Remove this ...

Page 14 - BASIC ENGINE; WARNING

l PAGE 14 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) Figure 2. Engine Controls & Components INITIAL SERVICING The engine (Figure 2) must be checked for proper lubrication andfilled with fuel prior to operation. Refer to the manufacturers Enginemanual for inst...

Page 15 - INSPECTION; CAUTION

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 15 Figure 3. Engine Oil Dipstick (Removal) 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 4), fill to the ed...

Page 16 - Figure 8. Vibrator Oil Plug; Check vibrator oil level by removing the plug (vibrator oil gauge); NEVER; attempt to check the V-belt with the engine running.

l PAGE 16 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) 2. The V-belt tension is proper if the V-belt bends 10 to 15 mm (Figure 7) when depressed with finger at midway betweenthe clutch and vibration pulley shafts. CLUTCH PULLEY VIBRATOR PULLEY V-Belt Check Figure 5...

Page 17 - Nnnn; and; OPERATION; a t t e m p t t o o p e r a t e t h e; pull the starter rope all the way to the end; O NOT; release the starter rope after pulling. Allow it to

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 17 1. Place the fuel valve lever (Figure 9) in the "ON" position. Figure 9. Fuel Valve Lever 2. Place the Engine ON/OFF switch (Figure 10) in the "ON" position. Figure 10. Engine ON/Off Switch 3. Pla...

Page 18 - m ove t h e t h r o t t l e l eve r q u i ck l y w i t h o u t; stop the engine suddenly while working at high

l PAGE 18 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) Operation 1. Once the engine has started, move the engine throttle lever quickly to the fast position. 2. With the throttle lever in the fast position, the engine speed should be around 2,300 RPM, therefore eng...

Page 19 - Inspection and Maintenance Service Tables.; To make sure your plate compactor is always in good; MAINTENANCE; Inspection and other services should; always; be carried out

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 19 Inspection and Maintenance Service Tables. 1. To make sure your plate compactor is always in good working condition before using, carry out the maintenanceinspection in accordance with Tables 4 through 6. e l u d...

Page 21 - Checking and Replacing the V-Belt and Clutch; After 200 hours of operation, remove the upper belt cover to; CHANGING VIBRATOR OIL; When changing the vibrator oil, remove the drain plug; Figure 15. Air Cleaner

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 21 Checking and Replacing the V-Belt and Clutch 1. After 200 hours of operation, remove the upper belt cover to check the V-belt tension. Tension is proper if the belt bendsabout 10 mm when depressed strongly with f...

Page 22 - Plate Compactor Storage; Drain the fuel tank completely; HONDA; Manual for engine storage.

l PAGE 22 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) Plate Compactor Storage For storage of the plate compactor for over 30 days, thefollowing is required: ■ Drain the fuel tank completely or add STA-BIL to the fuel. ■ Run the engine until the fuel is completely ...

Page 23 - TROUBLESHOOTING

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 23 Practically all breakdowns can be prevented by properhandling and maintenance inspections, but in the event of abreakdown, please take a remedial action following thed i a g n o s i s b a s e d o n t h e E n g i ...

Page 25 - NOTE PAGE

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 25 NOTE PAGE NOTES

Page 26 - EXPLANATION OF CODE IN REMARKS COLUMN; SAMPLE PARTS LIST; REMARKS Column

l PAGE 26 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if ther...

Page 27 - Description; SUGGESTED SPARE PARTS

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 27 MVC-88GH/GW 1 TO 5 UNITS WITH HONDAGX160K1QMX2 ENGINE 1 to 5 Units Qty. P/N Description 3 ......... o70100332 ....... V-BELT 1 ......... 060403060 ....... OIL SEAL, VIBRATING 2 ......... 050101000 ....... O-RING ...

Page 28 - NAME PLATE AND DECALS

l PAGE 28 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) NAME PLATE AND DECALS

Page 33 - VIBRATING CASE

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 33 NO PART NO PART NAME QTY. REMARKS 61 416115990 VIBRATING CASE 1 62 953400270 PLUG 1/4X14 10L 1 63 953405260 PACKING 1/4 1 64 001221635 BOLT 16X35 T 4 65 030216400 WASHER, LOCK M16 4 66 031116260 WASHER, FLAT M16 ...

Page 35 - SPRINKLING PIPE

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 35 NO PART NO PART NAME QTY. REMARKS 111 4169100109 WATER TANK ASSY. .................... 1 ............... INCLUDES ITEMS W/ * 111A * 416910010 WATER TANK (W/CAP ONLY) ...... 1 ............... REPLACES 416116010 IN...

Page 36 - TRANSPORT WHEEL ASSY.

l PAGE 36 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) TRANSPORT WHEEL ASSY.

Page 37 - WHEEL SHAFT

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 37 NO PART NO PART NAME QTY. REMARKS 1 416116160 WHEEL SHAFT 1 2 959404310 WHEEL 150X42 2 3 031120320 WASHER, FLAT M20 2 4 025203030 SPLIT COTTER PIN 3X30 2 5 416454150 ROLLER 2 6 025403025 SPRING PIN 3X25 3 TRANSPO...

Page 39 - GASKET, CYLINDER HEAD

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 39 NO. PART NO. PART NAME QTY. REMARKS 1 12210ZH8020 CYLINDER HEAD ......................................... 1 ...... INCLUDES ITEMS W/ * 2 * 12204ZE1306 GUIDE, VALVE (OS) (OPTIONAL) 1 3 * 12205ZE1315 GUIDE, EX. VAL...

Page 40 - CYLINDER BARREL ASSY.

l PAGE 40 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) CYLINDER BARREL ASSY.

Page 41 - HOLDER, GOVERNOR WEIGHT

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 41 NO. PART NO. PART NAME QTY. REMARKS 2 12000ZH8811 CYLINDER ASSY. (OIL ALERT) ................... 1 ...... INCLUDES ITEMS W/ * 3 15510ZE1023 SWITCH ASSY., OIL LEVEL ........................ 1 ...... USE UP TO ENGI...

Page 42 - CRANKCASE COVER ASSY.

l PAGE 42 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) CRANKCASE COVER ASSY.

Page 43 - GASKET, OIL FILLER CAP

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 43 NO. PART NO. PART NAME QTY. REMARKS 1 11300ZE1641 COVER ASSY., CRANKCASE (U-TYPE) ..... 1 ...... INCLUDES ITEMS W/ * 3 11381ZH8801 GASKET, CASE COVER 1 4 15600ZE1003 CAP ASSY., OIL FILLER ...........................

Page 45 - PART NAME

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 45 NO. PART NO. PART NAME QTY. REMARKS 4 13310ZE1601 CRANKSHAFT (Q-TYPE) 1 13 90003ZE1000 BOLT, HEX 5/16” ............................................ 1 .... USE FROM S/N 6745959 14 90473842000 WASHER, 8 MM ...........

Page 49 - SPRING, WEIGHT RETURN

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 49 NO. PART NO. PART NAME QTY. REMARKS 1 14100ZE1812 CAMSHAFT ASSY. ...................................... 1 ...... INCLUDES ITEMS W/ * 2 14410ZE1010 ROD, PUSH 2 3 14431ZE1000 ARM, VLAVE ROCKER 2 4 14441ZE1010 LIFTE...

Page 51 - SPRING, RECOIL STARTER

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 51 NO. PART NO. PART NAME QTY. REMARKS 1 28400ZH8013ZB STARTER ASSY., RECOIL “NH1”(BLACK) ............ 1 ..... INCLUDES ITEMS W/ * 2 * 28410ZH8003ZB CASE, RECOIL STARTER “NH1”(BLACK) 1 3 * 28420ZH8013 REEL, RECOIL S...

Page 53 - SHROUD

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 53 NO. PART NO. PART NAME QTY. REMARKS 2 19610ZE1000ZC COVER, FAN *NH1* (BLACK) 1 4 19612ZH8811 PLATE, SIDE (OIL ALERT) 1 7 90601ZH7013 CLIP, HARNESS 1 8 19630ZH8000 SHROUD 1 11 36100ZE1015 SWITCH ASSY., ENGINE STOP...

Page 57 - COLLAR B, AIR CLEANER

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 57 NO. PART NO. PART NAME QTY. REMARKS 1 16271ZE1000 GASKET, ELBOW ........................................ 1 ...... INCLUDES ITEMS W/ * 2 17210ZE1505 ELEMENT, AIR CLEANER (DUAL) 1 3 * 17218ZE1505 FILTER (OUTER) 1 4...

Page 61 - GASKET, FUEL FILLER CAP

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 61 NO. PART NO. PART NAME QTY. REMARKS 10 16854ZH8000 RUBBER, SUPPORTER (107MM) 1 17 16955ZE1000 JOINT, FUEL TANK 1 20 17510ZE1020ZF TANK, FUEL *NH1* (BLACK) 1 21 17620ZH7023 CAP, FUEL FILLER ..........................

Page 62 - COOLING FAN AND FLYWHEEL ASSY.

l PAGE 62 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) COOLING FAN AND FLYWHEEL ASSY.

Page 63 - FLYWHEEL

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 63 NO. PART NO. PART NAME QTY. REMARKS 1 13331357000 KEY, SPECIAL WOODRUFF (25 X 18) 1 2 19511ZE1000 FAN, COOLING 1 4 28451ZH8003 PULLEY, STARTER 1 5 31100ZE1010 FLYWHEEL 1 5 31100ZE1810 FLYWHEEL (LAMP) 1 8 90201878...

Page 68 - NO ARTWORK AVAILABLE

l PAGE 68 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) NO ARTWORK AVAILABLE GASKET KIT ASSY.

Page 72 - TERMS AND CONDITIONS OF SALE — PARTS

l PAGE 72 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipm...

Page 74 - OPERATION AND PARTS MANUAL; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; CANADA

OPERATION AND PARTS MANUAL Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Ofﬁ ce MQ Parts Department 18910 Wilmington Ave.Carson, CA 90746 Contact: [email protected] Tel. (800) 421-1244Fax (800) 537-3927 800-...