Page 2 - fuel and chemical exposure Warnings
page 2 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) its constituents, and some dust created of California to cause cancer, birthdefects and other reproductive harm. by power sanding, sawing, grinding, drilling and other construction activities contains chemicals know...
Page 3 - SILICOSIS WARNING; silicosis/respiratory Warnings
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 3 Grinding/cutting/drilling of masonry, concrete, metal andother materials with silica in their composition may giveoff dust or mists containing crystalline silica. Silica is abasic component of sand, quartz, brick cl...
Page 4 - table of contents; troWel; component drawings; NOTICE
page 4 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) table of contents b46s90 WalK-behind troWel Fuel and Chemical Exposure Warnings .................. 2 Silicosis/Respiratory Warnings ................................ 3 Table Of Contents .................................
Page 5 - training checKlist; Training checklist
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 5 training checKlist Training checklist No. description OK? date 1 Read operation manual completely. 2 Machine layout, location of components, checking of engine oil level. 3 Fuel system, refueling procedure. 4 Operat...
Page 6 - daily pre-operation checKlist; daily pre-Operation checklist; Engine oil level
page 6 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) daily pre-operation checKlist daily pre-Operation checklist 1 Engine oil level 2 Gearbox oil level 3 Condition of blades 4 Blade pitch operation 5 Safety stop switch operation
Page 7 - safety information; SaFeTy meSSageS; SaFeTy SymbOLS; SYMBOL; DECAL
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 7 safety information Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safet...
Page 8 - gENEral SafETy
page 8 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) safety information gENEral SafETy CaUTION NeveR operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective de...
Page 9 - TrOwEl SafETy; daNgEr; ENgiNE SafETy
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 9 safety information TrOwEl SafETy daNgEr Engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. The engine of this equipment requires an a...
Page 10 - FUeL SaFeTy; TraNSpOrTiNg SafETy
page 10 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) safety information NOTICE NeveR run engine without an air fi lter or with a dirty air fi lter. Severe engine damage may occur. Service air fi lter frequently to prevent engine malfunction. NeveR tamper with the...
Page 11 - eNvIRONmeNTaL SaFeTy/DeCOmmISSIONINg; dO NOT; emISSIONS INFORmaTION; Emission control label
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 11 safety information eNvIRONmeNTaL SaFeTy/DeCOmmISSIONINg NOTICE Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptabl...
Page 12 - troWel specifications/dimensions; SIDE VIEW; Trowel Specifications; Number of Blades; Table 2. Noise and vibration emissions
page 12 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) troWel specifications/dimensions Figure 1. Dimensions NOTES: 1. Sound Pressure and Power Levels are “A” weighted Measures per ISO 3744:2010. They are measured with the operating condition of the machine which gener...
Page 13 - engine specifications; Table 3. engine Specifications/Dimensions
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 13 engine specifications Table 3. engine Specifications/Dimensions model Subaru eX270De5013 engine Type Air-cooled 4 stroke, Slant Single Cylinder, OHC, Horizontal PTO Shaft Gasoline Engine Bore X Stroke 2.95 in. X 2....
Page 14 - general information; INTeNDeD USe; CeNTRIFUgaL
page 14 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) general information INTeNDeD USe Operate this trowel, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. T...
Page 15 - troWel components; Figure 2. Trowel Control and Components; NeveR; QUICK PITCH TM
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 15 troWel components 1 2 3 4 5 8 6 7 9 10 11 12 13 14 15 Figure 2. Trowel Control and Components Figure 2 shows the location of the basic controls or components, for the trowel. Listed below is a brief explanation of ...
Page 16 - engine components; INITIaL SeRvICINg; muffler; Figure 3. Engine Components and Controls
page 16 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) engine components INITIaL SeRvICINg The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details of op...
Page 17 - assembly and installation; aSSembLy aND INSTaLLaTION; Figure 4. Handle Tube Installation; vibratory T-Handle bar placement; HEIGHT
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 17 assembly and installation aSSembLy aND INSTaLLaTION Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section provides general instruct...
Page 18 - Figure 7. Throttle Cable Receiver Adjustment; Safety Stop Switch connection; Figure 8. Safety Stop Switch Connection; pitch cable installation; Standard Handle; Figure 9. Blade Pitch Star Wheel; Quick PitchTM Handle; Figure 11. Blade Pitch Cable
page 18 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) 7. Adjustment of the throttle cable tension may be required. If so, loosen the adjusting nut (top nut) on the throttle cable receiver (Figure 7) and loosen or tighten the locking nut (bottom nut). Retighten adjusti...
Page 19 - inspection; Figure 12. Pitch Cable Yoke Attachment; warNiNg; before Starting; Figure 14. Engine Oil Dipstick Removal; CaUTION
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 19 inspection Figure 12. Pitch Cable Yoke Attachment 6. Using a wrench, tighten the brass set #2 nut up against the yoke boss. This will lock the cable in place. 7. Use a wrench and finish tightening the brass set #1 ...
Page 20 - Oil Type; fuel check; gearbox Oil; STOP
page 20 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 15), fill to the edge of the oil filler hole with the recomm...
Page 21 - Operation; CENTRIFUGAL; lifting bale; Figure 18. Lifting the Trowel
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 21 inspection/operation centrifugal Safety "STOp" Switch This trowel has been equipped with a centrifugal safety " STOP " switch (Figure 17). This switch should be tested every time the engine is start...
Page 22 - Starting the Engine; Pull the; idle; OFF; operation; STOp
page 22 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) NeveR lift the trowel to unnecessary heights. dO NOT stand underneath the trowel while it is being lifted. Serious damage to the machine or personal injury could be caused by dropping a trowel. Starting the Engine ...
Page 23 - choke lever; OpEN; Figure 24. Starter Grip; clOSEd; Figure 25. Choke Lever Closed; Testing the centrifugal Safety Stop Switch; Figure 26. Testing Safety Stop Switch; Off; Figure 27. Testing Safety Stop Switch; KE
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 23 5. If starting a warm engine place the choke lever (Figure 23) in the " OpEN " position. Figure 23. Choke Lever (Open) 6. Grasp the starter grip (Figure 24) and slowly pull it out. The resistance becomes th...
Page 24 - To begin Troweling; To begin troweling, push the throttle lever (Figure 28) forward; concrete finishing Techniques; Slabs on Grade; pitching the blades (Quick pitchTM Handle); Quick PitchTM
page 24 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) To begin Troweling 1. To begin troweling, push the throttle lever (Figure 28) forward to the " RUN " position. Figure 28. Throttle Lever (Run) concrete finishing Techniques The following steps are intended ...
Page 25 - Figure 31. maneuvering the Trowel; feet; alwayS; rotating; maneuvering the Trowel
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 25 operation Figure 31. maneuvering the Trowel CaUTION NEVER place your feet or hands inside the guard rings while starting or operating this equipment. CaUTION alwayS keep clear of rotating or moving parts while oper...
Page 26 - Stopping The Engine; idlE; position and run the engine for three minutes at low; the fuel valve lever to the
page 26 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) Stopping The Engine 1. Move the throttle lever to the (Figure 32) " idlE " position and run the engine for three minutes at low speed. Figure 32. Throttle Lever (Idle) 2. After the engine cools, turn the en...
Page 27 - options; combo blades; Figure 36. Combination Blade
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 27 options Blades are a vital part of finishing concrete. This trowel, or finisher, has been designed to finish concrete and the blades are built to stringent quality standards out of the finest steel. If you need rep...
Page 28 - Figure 40. Trowel Arm Adjustment Fixture
page 28 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) options Trowel arm adjustment Tool (Optional) If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted. A special tool is available (Figure 40) that w...
Page 29 - maintenance; Table 5. engine maintenance Schedule; DUSTy; Table 6. Trowel maintenance Schedule
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 29 maintenance Table 5. engine maintenance Schedule dEScripTiON (3) OpEraTiON bEfOrE Each USe firST mONTH OR 20 HRS. eveRy 6 mONTHS OR 100 HRS. eveRy yEar OR 300 HRS. eveRy 2 yEarS Or 500 HRS. Engine Oil Check X Chang...
Page 30 - gENEral clEaNliNESS; Engine air cleaner; Figure 42. Engine Air Cleaner
page 30 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) maintenance General maintenance practices are cr ucial to the performance and longevity of your trowel. This equipment requires routine cleaning, blade and trowel arm inspection, lubrication and V-belt inspection f...
Page 31 - ENgiNE Oil; Figure 43. Draining Engine Oil; SpaRK pLUg; Figure 44. Spark Plug Gap; oil soaked; GAP
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 31 ENgiNE Oil 1. Drain the engine oil when the oil is warm as shown in Figure 43. 2. Remove the oil drain bolt and sealing washer and allow the oil to drain into a suitable container. 3. Replace engine oil with recomm...
Page 32 - SparK arrESTEr clEaNiNg; Figure 46. Spark Arrester Removal; bLaDe pITCH aDjUSTmeNT pROCeDURe; Figure 48. Blade Pitch Adjustment Bolt; flaT
page 32 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) maintenance SparK arrESTEr clEaNiNg Clean the spark arrester every 6 months or 100 hours.1. Remove the 4 mm screw (3) from the exhaust deflector, then remove the deflector. See Figure 46. 2. Remove the 5 mm screw (...
Page 33 - high; Figure 50. Incorrect Spider Plate Alignment; SpIDeR RemOvaL; Figure 51. Spider Removal
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 33 2. Pitch the blades as flat as possible. The pitch adjustment bolts (Figure 49) should all barely make contact (0.10 inch max. clearance) with the lower wear plate on the spider. All pitch alignment bolts should be...
Page 34 - chaNgiNg bladES; all; Figure 52. Blade Removal; TROWeL aRm RemOvaL; Figure 53. Trowel Arm Removal
page 34 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) chaNgiNg bladES It is recommended that all the blades on the trowel are changed at the same time. If only one or some of the blades are changed, the machine will not finish concrete consistently and the machine may...
Page 35 - CHeCKINg TROWeL aRm STRaIgHTNeSS; Figure 54. Trowel Arm; TROWeL aRm LeveR aDjUSTmeNT; Figure 56. Trowel Arm Adjustment Fixture
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 35 maintenance CHeCKINg TROWeL aRm STRaIgHTNeSS Trowel arms (Figure 54) can be damaged by rough handling, such as dropping the trowel on the pad, or by striking exposed plumbing, forms, or rebar while in operation. A ...
Page 36 - ReaSSembLy; Figure 57. Z-Clip Finisher Pan Installation
page 36 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) maintenance 7. Once the correct adjustment is made, tighten the lock nut on the trowel arm to lock in place. 8. Loosen locking nuts on the adjustment fixture, and remove trowel arm. 9. Repeat steps for the remainin...
Page 37 - STarT
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 37 maintenance LONg-TeRm STORage For storage of the trowel for over 30 days, the following is required: Drain the fuel tank completely, or add STA-BIL to the fuel. Run the engine until the gasoline in the carburet...
Page 38 - troubleshooting; Symptom
page 38 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) troubleshooting Troubleshooting (engine) Symptom possible problem Solution Diffi cult to start, fuel is available, but no spark at spark plug. Spark plug bridging? Check gap, insulation or replace spark plug. Carbo...
Page 42 - Wiring diagram
page 42 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ON OF F CENTRIFUGAL STOP SWITCH OIL LEVEL SWITCH GRN OIL ALERT UNIT YEL OIL LEVEL INDICATOR ENGINE STOP SWITCH UNIT IGNITION COIL CHASSIS GND. SPARK PLUG BLK BLK YEL BLK TRANSISTORIZED IGNITION UNIT Wiring diagram
Page 43 - notes
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 43 notes
Page 44 - explanation of code in remarKs column; SampLe paRTS LIST; paRT Name; duplicate item Numbers; without notice; RemaRKS; Serial Number break
page 44 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) explanation of code in remarKs column The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there ar...
Page 45 - suggested spare parts; b46S90 walK-bEhiNd TrOwEl; Description
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 45 suggested spare parts b46S90 walK-bEhiNd TrOwEl WITH SUbaRU eX270De5013 gaSOliNE ENgiNE 1 to 3 Units Qty. p/N Description 2............20478 .................... GRIP, HANDLE 1............21046 .......................
Page 46 - nameplate and decals
page 46 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) nameplate and decals MODEL SERIAL NO. 3 7 9 4 P/N 36099 1 2 5 10 P/N 23700 WWW.MULTIQUIP.COM WALK-BEHIND POWER TROWEL 6 8 FINISH J COMBO PRELOAD TRIM INDICATOR FINISH B COMBO STANDARD HANDLE QUICK PITCH™ HANDLE 11 ...
Page 48 - standard handle assy.
page 48 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) standard handle assy. 14 13 2 22 9 16 6 15 24 25 21 5 7 11 12 20 23 19 18 17 4 3 1 27 28 10 26 37 32 29 30 33 31 8 34 34 35 36 INSTRUCTIONS
Page 53 - GUARD RING
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 53 NO. paRT NO. paRT Name QTy. RemaRKS 1 21973 GUARD RING 1 2 0205 SCREW, HHC 3/8-16 X 1.0 4 3 1391 SCREW, HHC 5/16-24 X 1-1/2 ZINC 4 4 10024 NUT, NYLOC 1/4-20 2 5 21894 CLIP, FAST LEAD 1 6 21979 ACCESS PANEL, B FINIS...
Page 55 - CASE, WORM GEAR MACHINED
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 55 gearbox assy. NO. paRT NO. paRT Name QTy. RemaRKS 1%$ 0753 SEAL, OIL 1 2% 0131 A SCREW, HHC 1/4-20 X 3/4 4 3% 12876 FLANGE, INPUT SHAFT 1 4%$ 20395 O-RING, 2" 8032 N 1 6%# 20466 BEARING, CUP, TIMKEN #M11910 2 7...
Page 60 - stabilizer ring assy.; DETAIL “A”
page 60 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) stabilizer ring assy. 1 APPLY LOCTITE 242 BLUEOR EQUIVALENT. SEE DETAIL “A” DETAIL “A” 4 3 1 4 6 2 1 1 BLUE LOCTITE 5
Page 63 - TROWEL BLADE, 8 X 18 STANDARD BC
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 63 blade assy. NO. paRT NO. paRT Name QTy. RemaRKS 1 C464 TROWEL BLADE, 8 X 18 STANDARD BC 4 2 21906 SCREW, HHFS 5/16 - 18 X 1-1/2 GR5 8 3 BLADE AND PAN ACCESSORIES, ALL ...........1................SEE NOTICE BELOW 4 ...
Page 64 - ex27 — cranKcase assy.
page 64 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — cranKcase assy.
Page 66 - ex27 — cranKshaft assy.
page 66 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — cranKshaft assy.
Page 68 - ex27 — muffler assy.
page 68 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — muffler assy.
Page 70 - ex27 — air cleaner assy.
page 70 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — air cleaner assy.
Page 72 - ex27 — governor assy.
page 72 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — governor assy.
Page 75 - BLOWER HOUSING CP
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 75 ex27 — bloWer assy. NO. paRT NO. paRT Name QTy. RemaRKS 10 2795120201 BLOWER HOUSING CP 1 20 0732005820 LABEL (TRADE MARK) 1 40 0110060030 FLANGE BOLT 4 60 2795271111 BAFFLE 1 (CASE) CP 1 61 2795270213 BAFFLE 2 (HE...
Page 76 - ex27 — recoil starter assy.
page 76 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — recoil starter assy.
Page 78 - ex27 — fuel tanK assy.
page 78 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — fuel tanK assy.
Page 80 - ex27 — carburetor assy.
page 80 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — carburetor assy.
Page 82 - ex27 — ignition coil assy.
page 82 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — ignition coil assy.
Page 84 - ex27 — oil sensor assy.
page 84 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) ex27 — oil sensor assy.
Page 85 - OIL SENSOR CP
b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) — page 85 ex27 — oil sensor assy. NO. paRT NO. paRT Name QTy. RemaRKS 700 2797630151 OIL SENSOR CP 1 740 0010406140 BOLT AND WASHER AY 2 770 2797550123 WIRE CLAMP 1 775 0152060050 TAPPING BOLT 1 780 0569000020 PURSE LOCK 1
Page 86 - terms and conditions of sale — parts
page 86 — b46S90 WaLK-beHIND TROWeL • OpeRaTION aND paRTS maNUaL — Rev. #0 (06/13/13) paymeNT TeRmS Terms of payment for parts are net 30 days. frEighT pOlicy All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiqui...
Page 88 - OperatiOn and parts Manual; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; United StateS; Canada
OperatiOn and parts Manual pn: 23969 Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office MQ Parts Department 18910 Wilmington Ave. Carson, CA 90746 Contact: [email protected] Tel. (800) 421-1244 Fax (310) 5...
Multiquip DCA-45SSIU3
Manual
Multiquip MC3PBA (B&S)
Manual
Multiquip DCA-25SSI
Manual
Multiquip HHXG5
Manual
Multiquip DA7000SSA
Manual
Multiquip PS706026
Manual
Multiquip MVC-64H
Manual
Multiquip DCA-25USIXF
Manual
Multiquip WM120SM
Manual
Multiquip DCA-20SPX
Manual
Multiquip MVC-40G
Manual
Multiquip LT6D
Manual
Multiquip GB3LED
Manual
Multiquip TLG-12SPX4
Manual
Multiquip DFG Series
Manual
Multiquip Qp-301ty
Manual
Multiquip DCA-125USJ
Manual
Multiquip WBH16
Manual
Multiquip DA7000SS
Manual
Multiquip qp402h
Manual