Mitsubishi Electric EX321U-ST - Manuals

2 2. Control command configuration The command consists of the address code, function code, data code, ACK/NAK, and end code. The length of the com- mand varies among the functions. [Address code] Fixed to 00. (‘30h’ ‘30h’ in the ASCII code) [Function code] Code unique to each control operation. [Da...

5 4. Command list4.1 Operation commands The operation commands are used for the basic operation setting of this projector. They may not be executedwhile the signals are changed. The operation commands have no data codes. [Example] When setting the input signal to COMPUTER 1. (Values enclosed in quot...

6 4.3 Remote commands (Not executable in stand-by mode.) The remote commands allow the computer to control the projector in the same way as by the remote control.(Some operations cannot be controlled.) The remote commands have no data codes. Button’s name on remote Function Character ASCII +/VOLUME ...