Mitsubishi Electric C10 SERIES - Manuals

5 For assistance call 1(800) 332-2119 Setup and Operation 1 Remote Control Two A A Batteries A A A A Owner’s Guide Quick Setup Guide Product Registration Card Package Contents Please take a moment to review the following list of items to ensure that you have received everything. Installing the R emo...

6 1. Setup and Operation For assistance call 1(800) 332-2119 Re mote Control Powers T V on or off. Number/letter keys Channel tuning, page 8 PIN entry, page 24 Sleep Timer. Turns off the T V after the length of time you set. Press SLEEP repeatedly to increase the time from 15 minutes up to the maxim...

1. Setup and Operation 7 For assistance call 1(800) 332-2119 TV Controls, continued TV Control Panel Buttons on the control panel duplicate some keys on the remote control. Refer to • lower labels when using T V menus or after activating a special function. Refer to • upper labels when no T V menus ...

8 1. Setup and Operation For assistance call 1(800) 332-2119 Tun ing Channels from the Antenna Input After performing a channel scan, use these methods to tune to channels on the ANT input. Channels can be either from an over-the-air antenna or from direct cable service. Enter the channel number usi...

1. Setup and Operation 9 For assistance call 1(800) 332-2119 The FO RMAT Key and Picture Shape Important Black bars at the edges of the picture are common in HD pictures. Black bars are not a defect of the TV. Black bars are added by broad- • casters to fill the 16:9 screen area while preserving the...

10 1. Setup and Operation For assistance call 1(800) 332-2119 Non-anamorphic or SD 4:3 Anamorphic DVD Standard Distorted. Not recom-mended. Recommended Expand Recom-mended for letterbox. See Note 1. Distorted; not recommended. See Note 1. Zoom Distorted. Not recom-mended. See Note 1. Recommended for...

1. Setup and Operation 11 For assistance call 1(800) 332-2119 Using the TV with a Pe rsonal Computer Tip Set the computer’s screen saver to display a screensaver pattern after several minutes of inactiv-ity. This acts as a reminder that the T V is powered on and the lamp is in use. The lamp is in us...

12 1. Setup and Operation For assistance call 1(800) 332-2119 Press the INFO key to see an abbreviated status display. Press INFO again to see details. Not all information shown in the sample will be available for all programs and sources. Basic Status Display 1. Channel number. Digital channel incl...

1. Setup and Operation 13 For assistance call 1(800) 332-2119 3 D Video Notice Concerning Format Compatibility In order to display 3D images. Mitsubishi 3D Ready DLP Home Cinema TVs require the use of a 3D source device coupled with the Mitsubishi 3D adapter or other source devices that support chec...

14 1. Setup and Operation For assistance call 1(800) 332-2119 3 D Video, continued 3D Safety Requirements 3D Glasses are NOT designed as sunglasses or • safety glasses and do not provide protection. 3D glasses should be worn only when viewing 3D material. Do not wear the wireless glasses in any situ...

15 For assistance call 1(800) 332-2119 2 TV C onnections 1 2 3 HDMI HDMI Pb Pr INPUT 2 INPUT 1 (480i / 480p / 720p / 1080i) Y/ VIDEO Pb Pr Y/ VIDEO 3D GLASSES EMITTER ANT AUDIO L R DIGITAL AUDIO OUTPUT DVI/PC AUDIO INPUT HDMI ( page 17 ) DVI/PC AUDIO INPUT ( page 17 ) DIGITAL AUDIO OUTPUT ( page 18 ...

16 2. TV Connections For assistance call 1(800) 332-2119 The HDMI inputs can also accept digital DVI video signals. To connect a device’s DVI output to the TV’s HDMI input, use an HDMI-to-DVI adapter or cable plus an analog audio cable. Connect the analog audio cables to the DVI/PC AUDIO INPUT jacks...

2. TV Connections 17 For assistance call 1(800) 332-2119 HD MI Device Mitsubishi recommends using high-speed HDMI cables to connect newer devices incorporating HDMI technology. HDMI Pb Pr INPUT 2 INPUT 1 (480i / 480p / 720p / 1080i) Y/ VIDEO Pb Pr Y/ VIDEO 3D GLASSES EMITTER ANT AUDIO L R DIGITAL AU...

18 2. TV Connections For assistance call 1(800) 332-2119 Ante nna or Cable TV Service Connect the incoming cable to the T V’s ANT input. VCR or DVD Recorder to an Antenna or Wall Outlet Cable Required: 1. Video cables 1a. Component video cables (red/blue/ green) or 1b. Composite video cable (usually...

2. TV Connections 19 For assistance call 1(800) 332-2119 A/ V Receiver with HDMI Output Required: One HDMI-to-HDMI cable This option allows you to view content from devices connected to an A / V receiver. The A / V receiver can send audio and video to the T V over a single HDMI cable. You can use an...

20 For assistance call 1(800) 332-2119 3 TV Menus Press MENU on the remote control to open the m ain menu. Press • ENTER or to see sub-menus. Press • MENU or to back up one menu level. Press • EXIT to close all menus. Pi cture Main menu Picture Settings Picture settings are saved for the current inp...

3. TV Menus 21 For assistance call 1(800) 332-2119 S ound Sound menu Audio Settings Audio settings are saved for the current input only. Using the Audio Settings menu Highlight the slider you want to change and press 1. to make adjustments. Press 2. ENTER when done. Level Sound Smooths and levels so...

3. TV Menus 23 For assistance call 1(800) 332-2119 Use the T V’s channel menus to: Save a list of favorite channels (see • page 10 ). Define the source for the antenna input • Perform a channel scan • Limit • CH / CH tuning to only the channels you want Selectively scan for new channels • Add a sing...

24 3. TV Menus For assistance call 1(800) 332-2119 Channels, continued Additive Scan The additive scan adds only new channels. Unlike the full channel scan, custom channel settings are pre-served. Highlight 1. Additive Scan and press ENTER to select either ON or OFF . Highlight 2. Scan Channels and ...

3. TV Menus 25 For assistance call 1(800) 332-2119 Important Notes on Rating Locks • Rating locks apply only to channels and signals received on the ANT and composite VIDEO jacks. • When viewing a cable box, satellite receiver, or other device connected to the component Y Pb Pr or HDMI inputs, check...

26 3. TV Menus For assistance call 1(800) 332-2119 Locks, continued Chann el Locks Block access to the channels you specify. Highlight the control box next to the channel • number and press ENTER to lock or unlock the channel. Use the • Lock All and Unlock All options if working with many channel nu...

Appendices 27 For assistance call 1(800) 332-2119 CAUTION BURN DANGER! HOT SURFACES INSIDE! Touch lamp cartridge handle only. Do not touch lamp or lamp car- tridge housing. Keep lamp cartridge horizontal during removal. Do not tilt as glass may come out and cause injury. Replace lamp car- tridge onl...

28 Appendices For assistance call 1(800) 332-2119 Lamp-Cartridge Replacement Removing the Old Lamp Cartridge Turn off T V power and unplug the T V. Allow the 1. lamp to cool for at least one hour before proceed-ing. After the lamp has cooled, remove the cover of the 2. lamp compartment, located on t...

Appendices 29 For assistance call 1(800) 332-2119 Cl eaning Recommendations Normally, light dusting with a dry, non-scratching duster will keep your T V clean. If cleaning beyond this is needed, please use the following guidelines: First, turn off the T V and unplug the power cord from the power out...

30 Appendices For assistance call 1(800) 332-2119 Reset Name When to Use How to Use Resulting Action Format If the picture shape seems incorrect, use the FORMAT key to change the picture shape. Press FORMAT to cycle through the available picture shapes for the signal. The last-used format for a sign...

Appendices 31 For assistance call 1(800) 332-2119 Reset Name When to Use How to Use Resulting Action System Reset If the T V does not turn on or off, does not respond to the remote control or control-panel buttons, or has audio but no video. Press and hold the POWER button on the control panel for t...

Appendices 33 For assistance call 1(800) 332-2119 Appendix B: Troubleshooting, continued Sound Symptom Remarks 1. There is no sound even when the volume is turned up. • Check if the MUTE key is on. • The TV’s Sound > Analog Listen To setting may be set to SAP (analog program from the ANT input) b...

34 Trademark and License Information For assistance call 1(800) 332-2119 Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics ...

Trademark and License Information 35 For assistance call 1(800) 332-2119 If you are interested in obtaining open source code for this product, please contact Mitsubishi at (800) 332-2119. A nominal handling and mailing charge may apply. GNU General Public License Version 2, June 1991 Copyright (C) 1...

36 Trademark and License Information For assistance call 1(800) 332-2119 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundat...

38 Warranty For assistance call 1(800) 332-2119 Mi tsubishi Home-Theater Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/ Video Dealer, should it prove defective by ...

Website: www.mitsubishi-tv.com E-mail: [email protected] Call Consumer Relations for operational or connection assistance at 800-332-2119 To order replacement or additional remote controls or lamp cartridges Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the T V does no...