Minolta CD-10 - Manuals - manualsarea.com

Page 3 - Getting Started; Preface; Thank you very much for purchasing the Minolta PCMCIA Card

1 Getting Started Preface Thank you very much for purchasing the Minolta PCMCIA Card Drive CD-10. The Minolta PCMCIA Card Drive CD-10 can be connected to various makes of personal computers to read and write PC cards(PCMCIA/JEIDA specifications) and PC card adapter sets like theMinolta RM-2S/RM-4S S...

Page 4 - Precautions; Safety Precautions and handling; Power cord

2 Precautions Safety Precautions and handling Power cord - Do not bend the power cord excessively or place heavy objects on it. Damage to the cord may cause fire or electric shock. - Do not pull the cord itself to unplug; always hold the plug and pull. - Do not plug or unplug with wet hands. - Unplu...

Page 5 - Power source

3 Getting Started Power source Use a standard domestic household power supply (100 to 240V,50/60Hz). Proper places for use and storage - This unit is to be used at temperatures between +5 ° C and +40 ° C and at relative humidities between 20% and 80% (no condensation). - Do not use or store the unit...

Page 6 - FCC Radio Frequency Interference Warning; Notice for customers in Canada; This mark cortifies this product meet the requirements of the

4 FCC Radio Frequency Interference Warning Notice for customers in U.S.A This equipment generates and uses radio frequency energy, and if not installed and used in strict accordance with the manufacturer’sinstructions, can cause interference to radio and television reception. This equipment has been...

Page 7 - PC Cards

5 Getting Started PC Cards Most PC cards compatible with PCMCIA/JEIDA standard specifi- cations (ATA cards and SRAM cards) can be used. A variety of prod-ucts are compatible with the PCMCIA/JEIDA specification, but thespecifications are ambiguous and certain rules allow a large latitude.As a result,...

Page 8 - TABLE OF CONTENTS

6 TABLE OF CONTENTS Preface 1 Precautions 2 TABLE OF CONTENTS 6 1. Product Outline 7 Using with Macintosh computers 7 Using with IBM PC/AT compatible computers 7 2. Accessories 8 3. Names of Parts 9 4. Connecting with a Computer 11 Using without other SCSI devices 11 Using with other SCSI devices 12...

Page 9 - This PC card drive is designed to be connected to a personal com-; -1 Using with Macintosh computers; Connect the card drive to the SCSI port, the standard Macintosh in-

7 Getting Started 1. Product Outline This PC card drive is designed to be connected to a personal com- puter to read and write PC cards (ATA cards and SRAM cards). ASCSI interface is used to enable the device to be connected to a Ma-cintosh, IBM PC/AT compatible, and various other personal comput-er...

Page 10 - The PCMCIA Card Drive CD-10 package contains the following

8 2. Accessories The PCMCIA Card Drive CD-10 package contains the following items: PCMCIA Card Drive CD-10 LOCK ACCESS POWER Mac-PC Manager™ Lite Contains Mac-PC Manager Lite, asoftware driver for connection with aMacintosh computer. PCMCIA Card Drive CD-10 User's Manual (this manual) AC Adapter Scr...

Page 11 - This drive unit consists of the following parts:; Power Switch

9 Getting Started 3. Names of Parts This drive unit consists of the following parts: FRONT PANEL (1) Power Switch By sliding the switch back and forth from left to right, power isturned "on" and "off". (2) Power Indicator Lamp When power is on, light is green. (3) Access Indicator La...

Page 12 - Plug in AC adapter here.

10 REAR PANEL (7) Terminator Switch When this switch is "on", the terminator is active. When this is the lastdevice on a SCSI chain, the switch should be set to "on" (for furtherdetails see section 4 on "Connecting with a Computer"). (8) SCSI connector SCSI cable is connected...

Page 13 - Connecting; Connecting with a Computer; This drive unit connects to a computer through a SCSI ca-; -1 Using without other SCSI devices; Plug one end of the SCSI cable into the SCSI connector at

Connecting 11 4. Connecting with a Computer This drive unit connects to a computer through a SCSI ca- ble. There are two types of connection depending onwhether or not an additional SCSI device is to be used.These two cases are discussed in this section. Note: There are several physical forms of SCS...

Page 14 - -2 Using with other SCSI devices; Since the SCSI standard supports connection to one computer and

12 NOTE: The cable included in this package is a D-Sub25 to 50-pin full-pitch,intended for use with most IBM PC/AT compatible computers. Macintoshusers may require a D-Sub25 to D-Sub25 SCSI cable, available at mostcomputer stores. 4-2 Using with other SCSI devices Since the SCSI standard supports co...

Page 15 - -3 Setting the SCSI ID; The SCSI ID is a unique number assigned to each SCSI device.; To set the SCSI ID; Change the value on the ID number display window by turning the; For Macintosh computers; SCSI ID numbers 0 and 7 are used by the Macintosh hard drive

Connecting 13 SWITCH 0 1 2 3 4 5 6 7 8 9 SCSI ID 0 1 2 3 4 5 6 7 0 1 SCSI ID Switch SWITCH SCSI ID 1 0 1 0 2 3 5 4 6 7 8 9 1 0 2 3 5 4 6 7 SCSI ID 0 is assignedto the hard drive. SCSI ID 3 is assigned to the internal CD-ROM drive. SCSI ID 7 is assigned to the Macintosh system. 4-3 Setting the SCSI I...

Page 16 - For IBM PC/AT compatible computers; SCSI IDs 0 and 1 may have been previously assigned to the built-; -4 Turning on the power; To connect the AC adapter, plug the end of the power cord includ-

14 than 3 may be assigned.The SCSI ID for the built-in hard disk drive and the computer cannot bechanged. Also, notice the SCSI IDs for Macintosh computers range from 0to 7, the numbers on the SCSI switch are 0 through 9. If 8 and 9 on theswitch are selected, IDs 0 and 1 are assigned, respectively. ...

Page 17 - Operating; This section describes the operation relating to PC cards; -1 Inserting the PC card set

Operating 15 5. Basic Operations This section describes the operation relating to PC cards and PC card sets. SmartMedia SSFDC cards (like Minolta's Image Memory Card RM-2S and RM-4S) can be used in the CD-10 carddrive when used with an adapter, such as the PC CardAdapter CA-1S. When used together, t...

Page 18 - The time required between card insertion and mounting depends on

16 first and then the PC card icon appears on the monitor. This isthe “mounted” state, which enables read and write operationsfor the PC card set. The time required between card insertion and mounting depends on the card. Usually, the PC card set can be mounted within several sec-onds. (3) If the PC...

Page 19 - -2 Removing the PC card set; When the access indicator is lit

Operating 17 5-2 Removing the PC card set Make sure that the access indicator and lock indicator are not lit, then press the eject button to release the PC card set. When the access indicator is lit In this case, the data is being read or written. Wait until the opera- tions complete; then remove th...

Page 20 - For IBM PC/AT compatible computers: The lock indicator does

18 NOTE: The access indicator may flash on and off even after the eject oper-ation. In this case, you can remove the PC card set. NOTE: Do not select the “Eject Disk” command from the “Special” menu toremove the card set. The CD-10 drive does not have an eject motor. Thedisk must be ejected manually...

Page 21 - Macintosh; Using with a Macintosh; Mac-PC Manager Lite is a software driver that automati-

Macintosh 19 6. Using with a Macintosh 6-1 Functions of Mac-PC Manager Lite Mac-PC Manager Lite is a software driver that automati- cally mounts Macintosh formatted and DOS (MS-DOS/V,PC-DOS/V) formatted PC cards and floppy disks. Mac-PCManager Lite provides the following functions: - Automatically m...

Page 22 - -2 Installation procedure for Mac-PC Manager Lite; Mac-PC Manager Lite is an extension and therefore it must be cop-

20 6-2 Installation procedure for Mac-PC Manager Lite Mac-PC Manager Lite is an extension and therefore it must be cop- ied into the extensions folder on the hard disk. System 7.1 or a laterversion is needed to run this extension. (1) Insert the floppy disk marked "Mac-PC Manager™ Lite". (2)...

Page 24 - Applicable environment

22 The PCMCIA Card Drive CD-10 connects to Adaptec’s SCSI board. It also uses Adaptec’s software driver EZ-SCSI.This section assumes that Adaptec’s SCSI board and EZ-SCSI software are installed. For installation of the SCSIboard and EZ-SCSI, consult the manuals for those items. When connecting the C...

Page 25 - To replace the ASPIDISK.SYS driver; The attached ASPIDISK floppy disk stores the

IBM/W indows 23 Note: The following SCSI boards and ASPI managers can beused by the CD-10 drive with IBM PC/AT compatible computers: ASPI Manager: SCSI board: ASPI2DOS.SYS AHA-1510A, AHA-1522A, APA-1460 ASPI4DOS.SYS AHA-1542CF ASP7DOS.SYS AHA-2742-AT, AHA-2840A ASPI8DOS.SYS AHA-2940 SCSI boards whic...

Page 26 - Macintosh Systems

24 8. Troubleshooting Corrective Measure Insert the power plug securely into theoutlet or computer. Use a standard SCSI cable. Use a standard SCSI cable (6m or shorter). Change the cable connections. Activate terminator. Turn off the power to the SCSI devicethen change the SCSI ID. Turn off the powe...

Page 27 - roubleshooting; Cause

T roubleshooting 25 Cause The power is not connected to an outlet orcomputer. Nonstandard SCSI cable is used. The SCSI cable is too long. The settings for the SCSI board are not ap-propriate. Loose connection in the SCSI connector. The terminator is not activated. The same SCSI ID is assigned to ano...

Page 28 - For questions regarding installation and PCMCIA card; For more information

26 For questions regarding installation and PCMCIA card compatibility, please contact your dealer or a Minolta Ser-vice Facility. Be sure to include the following informationin your correspondence: • The make and model of your computer.• System software and version number.• Information on any other ...

Page 29 - Operating temperature and humidity:

Specifications 27 9. Specifications Card type: ATA and SRAM cards that comply with PCMCIA PC Card Standard Release 2.1/JEIDA PC Card Guideline Ver.4.2, and PC Card ATA Release 1.01 PC card slot: 1 Type I, II or III Host interface: SCSI-2 SCSI connector: D-Sub25 Transfer rate: 3MB/sec (for asynchrono...