Milwaukee 6088-30 - Manuals

model-name

Milwaukee 6088-30 Angle Grinder – User Manual, Manual in PDF format online.

Manuals:

User Manual Milwaukee 6088-30

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36

Summary

Page 5 - EXTENSION CORDS; READ AND SAVE ALL INSTRUCTIONS; TOOL ASSEMBLY; WARNING

page 5 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Us-ing extension cords with inadequately sized wire causes a serious dro...

Page 7 - USING SANDING DISCS

page 7 Removing Welds or Hammer Marks When removing welds or hammer marks, limit coarse sanding to the im-mediate area. Use successively fi ner grits to smooth surface. Cross Sanding When fi nishing a surface that has been prepared by a coarse disc or wheel, sand at right angles to the strokes made ...

Page 8 - USING GRINDING AND CUT-OFF WHEELS

page 8 USING GRINDING AND CUT-OFF WHEELS Fig. 8 Spindle Grinding wheels A. Type 28 with hub B. Type 27 with hub Type 29 with hub C. Type 27 with fl ange Type 29 with fl ange D. Type 11 Disc nut Nylon washer Type 27 fl ange Type 11 fl ange B C D A Spindle lock button Guard E. Type 28 F. Type 27 G. Ty...

Manual Milwaukee 6088-30

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43

Summary

Page 3 - READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.

3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmos- pheres, such as in the presence of fl ammable liquids, gases or dust. Power tools cr...

Page 4 - SPECIFIC SAFETY RULES

4 SPECIFIC SAFETY RULES S a f e t y Wa r n i n g s C o m m o n f o r G r i n d i n g , Sanding, Wire Brushing, or Abrasive Cutting-Off Operations:• This power tool is intended to function as a grinder, sander, wire brushing or cut-off tool. Read all safety warnings, instructions, illustrations and s...

Page 5 - SPECIFICATIONS; MILWAUKEE

5 SPECIFICATIONS Cat. No. Amps No Load RPM Spindle Thread Size Wheel Size 6088-306088-316089-306089-31 120120120120 15151515 5/8"-115/8"-115/8"-115/8"-11 7"/9"7"/9"7"/9"7"/9" • Support panels or any oversized workpiece to minimize the risk of wheel pin...

Milwaukee Angle Grinders Manuals