Microsoft TA61 - Manuals

■ Protect the device from dust, moisture and heat. ■ Take care to ensure that no foreign objects (e.g. paper clips) orliquids can get into the inside of the device, as this could causeelectrical shocks or short circuits. ■ Place the keyboard on a non-slip surface. Cleaning Instructions The keyboard ...

The set of keys contains:Key 1 for key position 1Key 2 for key positions 1 and 2Key 3 for key positions 1, 2 and 3Key 4 for key positions 1, 2, 3 and 4 The following items can be ordered optionally:Accessories kit 1: 20 dummy keys (1 x 1) Accessories kit 2: 6 double key caps2 quadruple key caps Acce...

Mounting keys Exchanging the Keys You can remove each of the keycaps using the key removal deviceenclosed, pulling the key upwards. Place the key removal device on theselected key until you hear a click. GB - 5

Now remove this key from the key-board by pulling upwards. If the key that has been removed hasa number or character on it, you canchange the lettering as follows: Using a thin object (e.g. paper-clipetc.), press upwards against theplastic cover through the opening onthe underside of the key. Please...

The labels are replaced as follows: ➀ Remove the key cap from the keyboard (see removing the key cap)and pull the transparent key cap upwards. ➁ The transparent key cover is then released and the label can beremoved. ➂ Replace the label and fit the transparent key cover (with the mat andconcave side...

The TA61 keyboard General The TA61 keyboard has a keypad with maximum 60 usable keys. Exceptfor the numeric keys (0 to 9), the C key and the 0.00 key, the key layout isflexible, i.e. any two contiguous keys can be combined to form a doublekey and any four keys can be combined to form a quadruple key...

TA61 keyboard without swipecard reader Keypad Keypad In the TA61 keypad, two keys can be combined to form a double key andfour keys to form a quadruple key, either horizontally or vertically. Onlyone key code is generated by each double or quadruple key. Different keycodes can be set for the multipl...

Key switch Key switch The TA61 keyboard is equipped with a key switch with 6 switch positions.Switch position 0 is the basic position; switch positions 1-4 are providedfor customer-specific applications. In positions 0 and 1, the key can be re-moved. The sixth switch position, which isdesignated on ...

Note the following precautions when handling magnetic cards: ■ Never allow magnetic cards to come into contact with liquids. ■ Never bend or fold magnetic cards. ■ Never expose magnetic cards to a magnetic field. Insert the magnetic card in the special slot provided on thereader from the right-hand ...

Releasing the Cable Connection Releasing the Cable Connection Never remove a cable from a connector socket by simply pulling on thecable. Always remove the cable by the connector housing. Please followthe instructions below when removing cables: ■ Turn off all switches to the mains and electrical eq...

Appendix Technical data Housing dimensions Footprint: 280mm x 172mm Height: 49mm Cable length Standard: 1m Optional: 2m extension cable Power supply 5V +/- 10%, max. 220mA Protocol PC AT interface, bidirectional,seriel, synchronous Connection Mini-DIN connector (6-pin.) Keyboard Keyboard with variab...

Keyboard layout Keyboard layout C 1 2 30 5 6 7 8 9 9 4 Labelled key, single (fitted at the factory) Freely assignable Key with inscription (numeric keypad) Keyboard layout GB - 14