Microsoft IC693CPU364 - Manuals

Page 2 - Important Product Information; Hardware Identification; Operating Notes; User Flash Contents

2 Important Product Information GFK-1490C • The CPU364 provides network communications using SRTP (Service Request Transfer Protocol) over standardTCP/IP (Transmission Control Protocol / Internet Protocol) on an Ethernet Local Area Network (LAN). TheCPU364 supports communications with other IC693 PL...

Page 3 - Firmware Upgrade Procedure; Option Module Revision Requirements; Writing Flash Using a Serial Programmer

Important Product Information 3 GFK-1490C Firmware Upgrade Procedure The Model 364 CPU operating firmware is stored in flash memory. The firmware upgrade is provided on a diskette andmust be serially downloaded from a Personal Computer. An IBM AT personal computer or better PC with a minimum640K of ...

Page 4 - Proper IP Addressing is Always Essential

4 Important Product Information GFK-1490C 2. Connect a serial terminal to the station manager port (port 1) of the CPU364. Then use the CHSOSWcommand to enter a temporary IP address. The Ethernet Interface can then be accessed over the network (suchas by an Ethernet PLC Programmer). See TCP/IP Ether...

Page 5 - RUN Mode Program Store; Store of Large Program Blocks from Older Ethernet Programmers

Important Product Information 5 GFK-1490C When the PLC configuration is stored from an Ethernet PLC Programmer, the communications loss occurs immediatelyafter successful completion of the store. Attempts to store configuration plus logic and/or reference tables in oneoperation can fail. However, st...

Page 6 - Documentation

6 Important Product Information GFK-1490C transfers, the TCP connection is terminated. If an application is constructed so that it rapidly and repeatedly establishesa channel with only one repetition (one transfer), the available TCP connections for the Ethernet Interface may betotally exhausted. Sp...

Page 7 - Error Condition

Important Product Information 7 GFK-1490C Problems Resolved in Firmware Version 9.10 (Ethernet Version 1.10) AI & AQ Above Default Values Release 9.00 provided support for configuring %AI and %AQ above their default values. These new references wouldpreviously only work as extra program memory, ...

Page 8 - Problems Resolved in Firmware Version 9.01

8 Important Product Information GFK-1490C Problems Resolved in Firmware Version 9.01 SNP Master mode on CPU Ports With some very large configurations and version 9.00 firmware, after a power-cycle, CPU ports set up for SNP Masterwould need to have their configuration re-stored for the protocol to ac...

Page 9 - Intermittent SNTP Loss Of Synchronization

Important Product Information 9 GFK-1490C Intermittent SNTP Loss Of Synchronization Under moderately heavy EGD traffic load, the Ethernet Interface may occasionally lose synchronization with its SNTPtime server and generate exception log event 29, entry 2=bH. Timing Issue With ALG220/221 Modules May...