Microsoft E800 - Manuals - manualsarea.com

Page 2 - Frequently Asked Questions; Introduction; Troubleshooting Tips and Tricks; Requirements

Tip #3. Upgrading Small Business Server 2000 from Uniprocessor HAL to Multiprocessor HAL Tip #4. Small Business Server 2000 Driver Signatures Tip #5. Upgrading D5013B NIC Drivers for Small Business Server 2000 Tip #6. Installation Fails to Boot after First Reboot Tip #7. Small Business Server 2000 R...

Page 3 - Installation Planning Sheet

· One or more hard drives. · Latest system BIOS update. (http://www.hp.com) · Two or more clients for testing purpose. (Optional) · HP Driver's diskette if installing devices that have no drivers included in the Small Business Server 2000 CD-ROM. Example: HP NetRAID-4M, HP Fiber Channel adapter (Opt...

Page 4 - Installation Methods; Automatic Installation; – boot from the HP Navigator CD and run the; Manual Installation; – do the following:; Automatic Installation – Using the HP Navigator CD; Boot the system from the HP Navigator CD.

Computer Name: ______________________ Admin Password: _____________________ Date Time Zone: ______________________ Workgroup or Domain Name: ______________ Registration Key: ____________________________ Installation Methods There are several ways of installing Small Business Server 2000. The most po...

Page 5 - Creating the Drivers Diskette; Boot the system from the Navigator CD.; Selecting the Manual Installation Method

Manual Installation Creating the Drivers Diskette Before you begin, use one of the following two methods that can be used to create the drivers diskette. One method is to create the drivers diskette using a system booted from the Navigator CD. The other method is to create the drivers diskette using...

Page 6 - Creating Setup Diskettes; Installing Small Business Server 2000; not

· If you want to start the setup by booting directly off the Small Business Server 2000 CD (supported for all NetServers), proceed to the following section "Installing Small Business Server 2000." Creating Setup Diskettes If you opt for starting the Small Business Server 2000 installation fr...

Page 8 - Hardware Status Check

15. Note: If you see a dialog box titled "Digital Signature Not Found". Please click "Yes" to continue the installation and read Tip #4 in the troubleshooting section of this guide. 16. Click Next at the regional Settings screen. 17. At the Personalize Your Software screen, enter a n...

Page 9 - Initialize Hard Drives

2. Click Properties . This brings up the "System Properties" panel. 3. Click the Hardware tab. 4. Click the Device Manager… button. 5. Verify that no devices have either a yellow band (!) or question mark (?) symbol next to it. (See following note for pointer to exceptions) Yellow ( ! ) mean...

Page 11 - Attach Clients to Network; and enter the command:

10. Open a command prompt window to verify the TCP/IP configuration. Enter the command: ipconfig /all You should get a display showing the configuration information you entered above. 11. Test the link by entering the following at the command prompt: ping computername Where computername is the serve...

Page 12 - Troubleshooting Tips

7. Click Next . The system will take a few minutes with the hour clock on the display before moving to next screen. 8. Click Next at the "NetBIOS Domain Name" dialog box to accept default "Domain NetBIOS name:" 9. Click Next to accept "Database and Log Locations" default valu...

Page 13 - Tip #1. Upgrading from SBS 4.0 to Small Business Server 2000; File

Tip #1. Upgrading from SBS 4.0 to Small Business Server 2000 It is possible to upgrade from any edition of NT 4.0 including Terminal Server to Small Business Server 2000. Please refer to the readme.doc on the Small Business Server 2000 CD and the Small Business Server 2000 Setup Guide for informatio...

Page 14 - Tip #4. Small Business Server 2000 Driver Signatures

5. Click "Display a list of known drivers for this device", and then click "Show all hardware of this device class". 6. Click the appropriate computer type (one that matches your current type, except for multiple CPUs), click Next , and then click Finish . Tip #4. Small Business Serv...

Page 15 - Select the appropriate media checkbox and click next.; Next; Tip #6. Installation Fails to Boot after First Reboot; Last known good configuration; . Provides no network services or drivers.

5. At the prompt "What do you want the wizard to do?", select the "Search for a suitable driver for my device" radio button, and click Next . 6. Select the appropriate media checkbox and click next. 7. Select the "Install one of the other drivers" check box and click Next. 8....

Page 16 - Includes networks services and drivers.; Directory services restore mode.; Brings system up with directory services disabled with the; Start RC Booting from Small Business Server 2000 CD-ROM; Type 1 and press; Enter; Type the administrator password when prompted.

2. Networking disabled. Includes networks services and drivers. 3. Directory services restore mode. Brings system up with directory services disabled with the intent of recovering active directory. Safe mode boot is guided by the registry key hklm\CurrentControlSet\Control\SafeBoot with the use of t...

Page 18 - APPENDIX; Model HP

Answer: Table 6, provided in the appendix of this document provides a list of Disk Array BIOS/Firmware versions used to test with Small Business Server 2000. HP recommends that you use the version indicated in this table or a later release. Question: Where do I get the driver's required to run Small...

Page 22 - On-Line Information and Software Sources

tc3100 No No No No Yes Yes No tc4100 No No No No Yes Yes Yes Table #6C List of NeRAID-4M, 2M and 1M adapters supported with Small Business Server 2000. Model Max 4Ms Supported Max 2Ms Supported Max 1Ms Supported Slotting preferences E60 None 3 6 N/A E800 None 3 6 N/A LC2000 2 3 6 Slots 5-6 because 5...