MicroLux 80463 - Manuals

model-name

MicroLux 80463 Table Saw – User Manual in PDF format online.

Manuals:

User Manual MicroLux 80463

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - OPERATING INSTRUCTIONS; #80463 MICROLUX TILTING ARBOR TABLE SAW; PRODUCT LIABILITY DISCLAIMER; T H E S M A L L T O O L S P E C I A L I S T S; NOTICE

OPERATING INSTRUCTIONS #80463 MICROLUX TILTING ARBOR TABLE SAW GENERAL SAFETY INSTRUCTIONS Table saws can be dangerous tools if not used properly. For your own safety and the safety of others, please read and understand operating instructions completely before using your new saw. 1. Always wear safe...

Page 3 - B. BLADE CHANGING INSTRUCTIONS; Always unplug saw before changing blades.

B. BLADE CHANGING INSTRUCTIONS Always unplug saw before changing blades. IMPORTANT NOTE: BLADE INSTALLED ON SAW IS FOR CUTTING WOOD ONLY. 1. For your safety, mount your saw in a location that does notrequire you or an observer to stand in line with the saw blade.Your saw must be securely mounted to ...

Page 4 - Never change angle of blade with saw running.; F. SAW BLADES AND CUTTING SPEEDS; Refer to chart on page 4

E. SAW OPERATION D. DUST COLLECTOR ATTACHMENT 1. CROSS CUTTING Cross cutting is a cut across the short dimensionof a piece of wood (usually across the grain).Remove rip fence and ALWAYS USE MITERGAUGE WHEN CROSS CUTTING. Adjust bladeheight so it is approximately 1/16" above thewood. Hold the woo...