MicroBoards QD-DVD - Manuals

Page 3 - Table of Contents

3 Table of Contents Introduction .................................................................................................................................... 5 Unpacking your system .................................................................................................................

Page 5 - Basic Instructions; Buttons and LCD

5 Introduction The QD-DVD is a high speed, low cost one to one DVD Recordable duplication system from Microboards Technology, LLC. The QD-DVD is perfect for any user requiring easy copying of audio, video, or Data discs. Superior technology allows the QD-DVD to ship without a hard drive. LED indicat...

Page 6 - Hardware Description; Reader Drive; Copying – DVD

6 Hardware Description The QD-DVD system consists of a DVD reader, DVD Writer, USB Connection, and Controller module. The master discs always go into the TOP DVD Reader drive. The blank media will always go into the BOTTOM DVD Recorder drive. The power switch and power LED are also located on the fr...

Page 7 - Main Menu

7 Main Menu 1 .0 Copy 2.0 Test 3 .0 Test & Copy 4 . 0 Verify 5 . 0 Compare 6 .0 Prescan 7 . 0 Disc Info 8.0 Edit Track 9. Setup Source Disc Analyzing…. Copying – 52x 17% 150 .4 MB 01:15 1.0 Copy OK: 01 ESC Load Next Blank Disc ENT Source Disc Analyzing…. Testing – 52x 17% 150 .4 MB 01:15 2.0 Tes...

Page 8 - Functions; Copy

8 Functions There are 10 different functions for the QD-DVD duplicator: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Edit Track, Setup, and USB Mode. For the Setup options, please refer to pages 13-15. Copy The Copy function is used to copy your master disc to the blank media. T...

Page 9 - Verify

9 Test & Copy The Test and Copy function will perform both operations, one after the other. If the Test portion passes without errors, the system will automatically start the Copy process. To run the Test and Copy function, press the ▼▲ buttons until the display reads: Place your master disc int...

Page 10 - Compare; Prescan

10 Compare The Compare function is used to compare the master disc with the copied disc. The Compare function will only work with Data masters. If your master disc has audio or video (VCD) on it, the Compare function will not work. To use the Compare function, press the ▼▲ buttons until the display ...

Page 11 - Disc Info; Edit Track

11 Disc Info The Disc Info function displays information on the type of master disc placed in the TOP reader drive. To use the Disc Info function, press the ▼▲ buttons until the display reads: Place the master disc into the TOP reader drive. Press the ENT button. The source is analyzed. The followin...

Page 12 - Play Audio Track

12 5. Once all of your tracks are selected for that master, press the ▼ button until the display reads: This screen shows the total number of tracks selected from the master disc and the total time of those tracks. 6. Press the ENT button. The following screen appears: Note: Pressing the ▼ button an...

Page 14 - Setup

14 Setup 9 .Setup 9 -01 . Setup Language 9 -02 . Setup CD Burn Speed Language English Idioma Spanish CD Burn Speed Maximum CD Burn Speed Available speeds: 40x, 32x, 24x, 20x, 16x, 10x, 4x ENT ESC ENT ▼ ▲ ▲▼ ENT ▼ ▼ 9 -03 . Setup DVD Burn Speed DVD Burn Speed Maximum Available speeds: 16x, 12x, 8x, 6...

Page 17 - Advanced Setup Menu; Accessing the Advanced Setup Menu

17 Advanced Setup Menu Accessing the Advanced Setup Menu The Advanced Setup menu includes options for the more advanced user. Normally these functions are not used in the daily operation of the QD-DVD duplicator. If you have any questions about using these functions, please contact the Microboards t...

Page 20 - Appendix 1 List of Functions

20 Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track (for CD only) 8-1 CD to CD Edit 8-3 Play Audio Track 8-4 Close Session 9 Setup 9-1 Language (Default is English) 9-2 CD Burn Speed (Default is Maximum) 9-3 DVD Burn Speed (Default is...

Page 21 - Appendix 2 LCD Messages

Appendix 2 LCD Messages Normal Conditions: Initialize SDRAM ......................................................................Initialize the memory of the system. Detect Drives ....................................................Detect what drives are connected with the system. User Abort! ........