MicroBoards Flash Duplicator - Manual

Page 3 - Table of Contents

3 Table of Contents Introduction......................................................................................................................... 5 What’s Included .............................................................................................................. 5 Installation......

Page 5 - Introduction; What’s Included; Installation; USB Flash

5 Introduction The Copywriter Flash Duplicator allows you to make fast copies of USB flash cards. This series is available in 3, 7, or 11 copy configuration. What’s Included When unpacking your Copywriter Flash Duplicator system, the following items should be included: • Copywriter Flash Duplicator ...

Page 6 - Hardware Description; Reader; Copywriter USB

6 Hardware Description The Copywriter Flash Duplicator consists of a reader port, 3, 7, or 11 flash drive ports and Controller module. The master card will always be inserted into the TOP LEFT port, which is outlined. The blank cards will always be inserted into the remaining ports. The green LEDs a...

Page 8 - Main Menu; Copy; Asyn Hold Time Setting

8 Pass: 27 Working Fail: 0 12 USB(3747M) 219M Reading: 124M Wait Too Long Exit? Main Menu There are 6 different Main Menu items for the Copywriter Flash Duplicator: Copy, Compare, Copy & Compare, Information, Utility, and Setup. For the Setup options, please refer to page 9. These instructions r...

Page 10 - Full Erase; System Update; Setup Menu Flowchart

10 Utility The Utility function is available for erasing inserted cards and updating the Duplicator firmware. Measure Speed The Measure Speed function can be turned on to measure the exact speed of the flash read and write. Media Check This function checks the media quality, and can be set to 3 diff...

Page 11 - Setup Menu

11 Setup Menu The Setup function gives you access to some of the default settings used by the Copywriter Flash Duplicator. Startup Menu The Startup Menu selection allows you to select the main menu item that appears when the Copywriter Flash Duplicator starts up. The default setting is 1. Copy . Mai...

Page 12 - Why does the copy speed seem slow?

12 Troubleshooting and Frequently Asked Questions Is there any limitation for copy file format? You can use "Only Data Area" to copy FAT16/32, NTFS, Linux (ext3) format, it will only copy the data, and therefore the copy speed will be quicker. If you want to copy other formats, it can use &#...

Page 13 - Appendix 1: List of Functions

13 Specifications Contact Information For technical questions or support issues, please contact Microboards Technology technical support at: United States PH: 952-556-1639 FAX: 952-556-1628 [email protected] www.microboards.com Europe PH: +44 (0) 845 230 7800 www.microboards.co.uk Japan PH: 03...

MicroBoards Flash Duplicator - Manual

Table of Contents:

Summary

Other MicroBoards Models