MicroBoards QD-127 - Manuals

Page 3 - Table of Contents

3 Table of Contents Introduction ................................................................................................................................ 5 Unpacking your system ............................................................................................................. 5 In...

Page 5 - Basic Instructions; Buttons and LCD

5 Introduction The QD-MultiDrive Series includes the QD-123, QD-125, and QD-127. Each is a high speed, low cost CD Recordable duplication system from Microboards Technology, LLC. The QD-MultiDrive is perfect for any user requiring easy copying of audio, video, or Data CDs. Superior technology allows...

Page 6 - Hardware Description; Reader Drive; Copying – 52x

6 Hardware Description The QD-MultiDrive system consists of a CD reader, 3, 5, or 7 CD recorders (based on model) and Controller module. The master discs always go into the TOP CD Reader drive. The blank CD media will always go into the CD Recorder drives below the Reader. The power switch and power...

Page 7 - Main Menu

7 Main Menu 1 .0 Copy 2.0 Test 3 .0 Test & Copy 4 . 0 Verify 5 . 0 Compare 6 .0 Prescan 7 . 0 Disc Info 8.0 Edit Track 9. Setup Source Disc Analyzing…. Copying – 52x 17% 150 .4 MB 01:15 1.0 Copy OK: 07 ESC Load Next Blank Disc ENT Source Disc Analyzing…. Testing – 52x 17% 150 .4 MB 01:15 2.0 Tes...

Page 8 - Functions; Copy

8 1. Copy Copying – 52x 18% 150.4MB 01:15 2. Test 3. Test & Copy Testing – 52x 18% 150.4MB 01:15 1.0 Copy OK: 07 2.0 Test OK: 07 Functions There are 9 different functions for the QD-MultiDrive duplicator: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Edit Track and Setup. For...

Page 10 - Edit Track; CD to CD Edit

10 8. Edit Track 8-01. Edit Track CD to CD Edit Select Track: 1/16 04:53 Select Track: + 1/16 04:53 Select Track: End 1Track 04:53 End Edit Disc And burn? YES Copying – 52x Edit 1/16 → 1/1 Burn Complete! OK: 07 Place the master disc into the TOP reader drive. Press the ENT button. The source is anal...

Page 11 - Close Session

11 Continue Edit Next disc? NO Continue Edit Next disc? NO 8. Edit Track 8. Press the ESC button to take you to this screen: If you wish to continue to add more audio tracks to the disc in the recorder drive, press the ▼ button to change the NO to YES. Then press Enter. The TOP reader drive will ope...

Page 12 - Setup

12 Setup 9 .Setup 9 -01 . Setup Language Language English Idioma Spanish ENT ESC ENT ▼ ▲ 9-02. Setup CD Burn Speed CD Burn Speed Maximum CD Burn Speed Available speeds: 48x, 40x, 32x, 24x, 20x, 16x, 10x, 4x ▲▼ ENT ▼ ▼ 9-05. Setup Start Up Menu Maximum Start Up Menu 1.Copy ESC ▲▼ ESC ENT 9-06. Setup ...

Page 13 - Setup Menu

13 Setup Menu The Setup menu includes many setting the user can select to customize the use of the QD-MultiDrive duplicator. Here is a description of the options in the setup menu. Language The QD-MultiDrive duplicator has two language options, English and Spanish. English is the default setting. CD...

Page 16 - Advanced Setup Menu

16 Advanced Setup Menu To get to the Advanced Setup Menu, press and hold the ESC button for three seconds. The Advanced Setup menu includes options for the more advanced user. Normally these functions are not used in the daily operation of the QD-MultiDrive duplicator. If you have any questions abou...

Page 17 - USB Option; CD Text

17 CD+G The CD+G feature, when set to ON in the Advanced Setup Menu, will allow you to copy a CD+G Karaoke master disc. The default setting is OFF. Important Note : The CD+G value must be set to OFF to use the Track Extraction feature. To enable CD+G duplication, perform the following steps: 1. Pres...

Page 18 - Model

18 Specifications – QD-MultiDrive Series • Product Interface ATAPI/ IDE • Read Speed 52X • Write Speed 52X • System Display LED • Write Method Auto Detect (DAO, TAO ) • Operation Mode COPY, TEST, SCAN, SAFE • Data Buffer 1 MB • Firmware Upgrade Via CD-ROM • AC Input: 115/230 VAC; 8/5 AMPS MAX; 50-60...

Page 19 - Appendix 1 List of Functions

19 Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track 8-1 CD to CD Edit 8-2 Play Audio Track 8-3 Close Session 9 Setup 9-1 Language (Default is English) 9-2 CD Burn Speed (Default is Maximum) 9-3 CD Read Speed (Default is Maximum) 9-4 A...

Page 20 - Appendix 2 LCD Messages

Appendix 2 LCD Messages Normal Conditions: Initialize SDRAM ......................................................................Initialize the memory of the system. Detect Drives ....................................................Detect what drives are connected with the system. User Abort! ........