MGE UPS Systems EX 700 - Manuals

MGE UPS Systems EX 700 – Manual in PDF format online.

Manuals:

Manual

Manual MGE UPS Systems EX 700

Summary

Page 2 - Introduction

Page 2 - 51031604EN/AA Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The Pulsar EX range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your UPS. MG...

Page 3 - Safety; Safety of persons; Safety rules; Product safety; Special precautions

51031604EN/AA - Page 3 Safety Safety of persons Safety rules A UPS has its own internal power source (the battery). Consequently, the power outlets may be energised even if the UPSis disconnected from the AC-power source. Dangerous voltage levels are present within the UPS. It should be opened exclu...

Page 4 - Foreword; Using this document; Pictograms

Page 4 - 51031604EN/AA Foreword Using this document Important instructions that must always be followed. Information, advice, help. Visual indication. Action. Audio indication. In the illustrations on the following pages, the symbols below are used: LED off. LED on. LED flashing. Information may be ...

Page 5 - Contents; Presentation; Connection to the RS 232 or USB communications port; Operation; Operation on battery power

51031604EN/AA - Page 5 Contents 1. Presentation 1.1 Pulsar EX range .......................................................................................................................... 7 Tower model ..................................................................................................

Page 6 - Personalisation; Maintenance

Page 6 - 51031604EN/AA Contents 3.4 Personalisation (optional) ........................................................................................................... 19 Function ........................................................................................................................

Page 8 - Tower model

Page 8 - 51031604EN/AA 1 2 RS232 USB 1 2 RS232 USB 5 1. Presentation 1.2 Back Pulsar EX 1500 Pulsar EX 700 / Pulsar EX 1000 slot for communications-card option. RS232 communications port. USB communications port. four outlets for direct connection ofprotected equipment. connector for automatic detec...

Page 9 - Rack model

51031604EN/AA - Page 9 1 2 RS232 USB 1. Presentation Pulsar EX 700 Rack / Pulsar EX 1000 Rack / Pulsar EX 1500 Rack 7 6 1 4 11 8 3 9 10 Rack model slot for communications-card option. RS232 communications port. USB communications port. four outlets for direct connection ofprotected equipment. connec...

Page 11 - Unpacking and checks

51031604EN/AA - Page 11 2. Installation 2.1 Unpacking and checks two cords for connection of the protected equipment. RS 232 communications cable. USB communications cable. "UPS Driver" diskette for UPS personalisation. "Solution Pac" CD ROM. documentation. 27 28 29 25 24 25 26 27 28...

Page 13 - Installation of the rack version; Rack mounting diagram with rails.

51031604EN/AA - Page 13 2.2 Installation of the rack version 2. Installation Rack mounting diagram with rails. The rails and the necessary mounting hardware are supplied by MGE UPS SYSTEMS. 1 2 3 3 3 3 4 EX1000 Rack

Page 14 - Connection to the RS 232 or USB communications port

Page 14 - 51031604EN/AA 2. Installation 2.3 Connection to the RS 232 or USB communications port (optional) 1 - Connect the RS 232 25 or USB 26communications cable to the serial port orthe USB port on the computer. 2 - Connect the other end of thecommunications cable 25 or 26 to the RS232 2 or USB 3 ...

Page 15 - Installation of the communications-card option

51031604EN/AA - Page 15 1 2 U-Talk USB 2.4 Installation of the communications-card option It is not necessary to shut down the UPS toinstall the communications card: 1 - Remove the slot 1 cover secured bytwo screws. 2 - Insert the card in the slot. 3 - Secure the card with the two screws. Tower mode...

Page 17 - Bargraph indications; LEDs 12 to 15 provide three different indications:

51031604EN/AB - Page 17 3. Operation 3.1 Start-up 100% 80% 50% 20% test % % 1 2 bypass The protected equipment connected to the UPS can be energised, whether AC input power is available or not. 12 13 14 23 Caution: the AC input power source must be present when energising forthe first time.Press the...

Page 18 - Operation on battery power; Transfer to battery power; Threshold for the low-battery warning

Page 18 - 51031604EN/AB 3. Operation 3.3 Operation on battery power (following failure of AC input power) 1 2 bypass 1 2 bypass test % 1 2 bypass 22 Transfer to battery power The AC-power source is outside tolerances, LED 23 is ON, the buzzerbeeps three times. The equipment connected to the UPS is s...

Page 19 - Function

51031604EN/AB - Page 19 3. Operation 3.4 Personalisation (optional) Function Personalisable function Automatic start Cold start (battery power) Forced shutdown Sleep mode UPS ON / OFF via software Default setting Enabled Enabled Enabled Disabled Enabled Personalisation parameters can be set and modi...

Page 22 - Troubleshooting requiring MGE UPS SYSTEMS after-sales support

Page 22 - 51031604EN/AB Troubleshooting requiring MGE UPS SYSTEMS after-sales support Indication LED 13 flashes and thebuzzer soundscontinuously. Signification UPS electronics have detected a UPS fault.Depending on the UPS personalisation parameters(see section 3.4), there are two possibilities: ◗ t...

Page 23 - Replacement of the battery module; Removal of battery module; Reinstallation of the battery module

51031604EN/AB - Page 23 A B A F G C D E 4.2 Replacement of the battery module 4. Maintenance Removal of battery module A - Press to open door. B - Slide the door open and remove it. C D E - Procedure to remove the protective cover. F - Disconnect the battery module. G - Remove the battery module. To...

Page 25 - This product has been designed to respect the environment:; UPS recycling at the end of service life:

51031604EN/AB - Page 25 5. Environment This product has been designed to respect the environment: It does not contain CFCs or HCFCs. UPS recycling at the end of service life: MGE UPS SYSTEMS undertakes to recycle, by certified companies and in compliance with all applicable regulations, allUPS produ...

Page 26 - Technical characteristics; Operating conditions

Page 26 - 51031604EN/AB 6. Appendices 6.1 Technical characteristics Operating conditions Relative humidity: 20 to 90% without condensation.Temperature: 0 to 40 ° C. Simplified diagram