MGE UPS Systems 2200C - Manuals

MGE UPS Systems 2200C – Manual in PDF format online.

Manuals:

Manual

Manual MGE UPS Systems 2200C

Summary

Page 2 - Introduction; Pulsar EX; Pulsar EX

Page 2 - 34007532EN/AA Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The Pulsar EX treme C range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your...

Page 3 - Pictograms; Foreword; Using this document

34007532EN/AA - Page 3 Important instructions that must always be followed. Information, advice, help. Visual indication. Action. Audio indication. In the illustrations on the following pages, the symbols below are used: LED off. LED on. LED flashing. Information may be found primarily by consulting...

Page 5 - Contents; Presentation; Installation

34007532EN/AA - Page 5 Contents 1. Presentation 1.1 Standard positions ....................................................................................................................... 7 Rack position ................................................................................................

Page 6 - Maintenance; Troubleshooting; Environment; Technical characteristics

Page 6 - 34007532EN/AA Contents 4. Maintenance 4.1 Troubleshooting .......................................................................................................................... 20 4.2 Replacement of the battery module ........................................................................

Page 7 - Standard positions; Rack position

34007532EN/AA - Page 7 1. Presentation 1.1 Standard positions Rack position Tower position Pulsar EX treme 2200C : 35.3 Kg Pulsar EX treme 3200C : 35.7 Kg 654 mm 438 mm (19") 86.5 mm(2U) www.mgeups.c om P U L S A RE X t r e m e 100% 80% 50% 20% test % 1 2 % BYPASS P U L S A RE X t re m e www.mge...

Page 9 - Alarms; battery; load

34007532EN/AA - Page 9 1.3 Control panel Alarms Hold down to displaypercent load: ◗ Lamp test or buzzer OFF. ◗ Forced transfer to bypass and back by pressing button 3 times in lessthan 5 seconds. ON / OFF. % battery remaining 100% 80% 50% 20% 1. Presentation Status of programmable outlet 1: Operatio...

Page 10 - Unpacking and parts check; UPS Driver

Page 10 - 34007532EN/AA 2. Installation 2.1 Unpacking and parts check Cord for connection to the AC-power source for Pulsar EX treme 3200C versions only (for the Pulsar EX treme 2200C version, use the power cord of the protected equipment). Two cords for connection of the protected equipment. RS232 ...

Page 11 - Installation in rack position; Follow steps 1 to 6 for rack mounting of the UPS on the rails.; tes

34007532EN/AA - Page 11 2.2 Installation in rack position 2. Installation Follow steps 1 to 6 for rack mounting of the UPS on the rails. The rails and the necessary mounting hardware are supplied by MGE UPS SYSTEMS. Note for step 3: It is possible to adjust the positions of the front brackets. 1 2 5...

Page 12 - Installation in tower position; Connect the two supports for the upright position.

Page 12 - 34007532EN/AA 2.3 Installation in tower position 2. Installation Connect the two supports for the upright position. P U L S A RE X t r e m e P U L S A R EX tr em e www .mgeups.com www.mgeups. com 1 0 0 % 8 0 % 5 0 % 2 0 % te s t % 1 2 % B Y P A S S

Page 15 - Bargraph indications; LEDs 24 to 27 provide three; Solution Pac

34007532EN/AA - Page 15 The protected equipment connected to the UPS can be energised, whether AC input power is available or not. 3. Operation 3.1 Start-up Caution : the AC input power source must be present when energising for the first time.Press the ON / OFF button 16 . The buzzer beeps and all ...

Page 16 - Operation on battery power; Transfer to battery power; The equipment connected to the UPS is supplied by the battery.; Threshold for the low-battery warning; UPS; End of backup time; The equipment is no longer supplied with power.

Page 16 - 34007532EN/AA 3. Operation 3.3 Operation on battery power (following failure of AC input power) Transfer to battery power The AC-power source is outside tolerances, LED 17 is ON, the buzzer beeps three times. The equipment connected to the UPS is supplied by the battery. Threshold for the ...

Page 17 - Function

34007532EN/AA - Page 17 3. Operation 3.4 Personalisation (optional) Function Personalisable function Automatic start Cold start (battery power) Forced shutdown Sleep mode UPS ON / OFF via software Default setting Enabled Enabled Enabled Disabled Enabled Personalisation parameters can be set and modi...

Page 19 - UPS remote power off; Installation and test of the remote power off function

34007532EN/AA - Page 19 3. Operation 3.6 UPS remote power off Pulsar EX treme C is equipped with a remote power off function (RPO) that can cut power to all the devices connected to the UPS using a remote user-operated contact.The function is implemented by opening a contact connected to the two ter...

Page 22 - Replacement of the battery module; Removal of battery module

Page 22 - 34007532EN/AA 4.2 Replacement of the battery module 4. Maintenance Safety rules: Batteries constitute a danger (electrical shock, burns). The short-circuit current may be very high. Precautionsmust be taken for all handling: ◗ remove all watches, rings, bracelets and any other metal object...

Page 23 - Reinstallation of the battery module

34007532EN/AA - Page 23 4. Maintenance E - Remove the screws for the battery cover. F - Remove the cover. Reinstallation of the battery module Carry out the above operation in reverse order. ◗ To maintain an identical level of performance and safety, use a battery module identical to that previously...

Page 24 - This product has been designed to respect the environment:; UPS recycling at the end of service life:

Page 24 - 34007532EN/AA 5. Environment This product has been designed to respect the environment: It does not contain CFCs or HCFCs. UPS recycling at the end of service life: MGE UPS SYSTEMS undertakes to recycle, by certified companies and in compliance with all applicable regulations, allUPS produ...

Page 25 - Technical characteristics

34007532EN/AA - Page 25 6. Appendices 6.1 Technical characteristics Rating AC input ◗ Voltage ◗ Frequency ◗ Power factor Output ◗ Voltage ◗ Frequency ◗ Harmonic distortion ◗ Overload capacity Battery Environment ◗ Noise level ◗ Operating temperature ◗ Relative humidity Standards and certification ◗ ...