METRObility R104-11 - Manuals

Page 2 - Metrobility Four-port Switch

This publication is protected by the copyright laws of the United States and other countries, with all rightsreserved. No part of this publication may be reproduced, stored in a retrieval system, translated,transcribed, or transmitted, in any form, or by any means manual, electric, electronic, elect...

Page 3 - Table of Contents; Metrobility 4-port Switch Installation & User Guide

Table of Contents Metrobility 4-port Switch Installation & User Guide Overview .............................................................................................................. 4 Installation Guide ........................................................................................

Page 4 - Overview

4 Overview Overview The Metrobility ® R104-11 is a four-port 10/100Mbps TX switch that provides a cost-effective solution for situations in which a simple switchingoption with few ports is required. When configured for stacking in a Metrobilitychassis, the card eliminates the need for any external e...

Page 5 - Installation Guide; Unpack the Line Card

Metrobility 4- port Switch 5 Installation Guide Follow the simple steps outlined in this section to install and start using theR104. NOTE: Electrostatic discharge precautions should be taken when handling anycircuit board. Proper grounding is recommended (i.e., wear a wrist strap). Unpack the Line C...

Page 9 - Install the Card

Metrobility 4- port Switch 9 • Insert the card into either slot in the R400 or R1000. In the R5000chassis,any slot excluding slot #17. Make sure the top and bottomedges of the board are aligned with the top and bottom card guidesin the chassis. Do not force the card into the chassis unnecessarily.It...

Page 10 - Connect to the Network

10 Installation Guide Connect to the Network To connect the R104 to the network, insert the twisted-pair cables intothe appropriate connectors. Be sure the card is secured to the chassis bytightening the thumbscrew before making network connections. The R104 provides four shielded RJ-45 connectors t...

Page 11 - User Guide; LED Indicators

Metrobility 4-port Switch 11 User Guide This section contains information regarding the operating features of theMetrobility R104. LED Indicators The R104 provides several LEDs for the visible verification of unit status andproper functionality. These LEDs can assist in troubleshooting and with over...

Page 12 - Technical Specifications; Network Connections

12 User Guide Technical Specifications Network Connections Twisted-Pair InterfaceConnector __________________________________ Shielded RJ-45, 8-pin jackImpedance ________________________________________ 100 Ohms nominalSignal Level Output (differential) ________________ 0.95 to 1.05V (100Mbps) _____...

Page 13 - USA FCC Radio Frequency Interference Statement

Metrobility 4-port Switch 13 Product Safety, EMC and ComplianceStatements This equipment complies with the following requirements: • UL• CSA• CE• CB• FCC Part 15, Class A• EN55022 Class A (emissions)• EN55024: 1998 (immunity)• ICES-003 Class A (emissions) This product shall be handled, stored and di...

Page 14 - Warranty and Servicing

14 User Guide Warranty and Servicing Telco Systems’ Product Warranty TELCO MAKES NO WARRANTIES EXCEPT AS HEREIN SET FORTH: Telcowarrants that the equipment and accessories manufactured by Telco, when used in theapplication and manner for which they are intended, will be free from defects caused byfa...

METRObility R104-11 - Manuals

Manuals:

Manual METRObility R104-11

Summary

METRObility Manuals