Memorex MT1091 - Manuals

– 5 – CHANNEL VOLUME MUTE MENU RECALL SLEEP TV/VIDEO POWER Q.REV. Remote Control Number Buttons Press to select a channel. For channels 1-9, press 0, then the channel you want to watch. For example, for channel 6, press 0, 6. For channels 100-125, press the 100 button, then press the last two digits...

– 6 – ANTENNA CONNECTIONS If you are using an indoor antenna (included) or an outdoor antenna (not included) followthe instructions below that correspond to your antenna system. If you are using a cabletelevision service (CATV), refer to CATV connections. Combination VHF/UHF Antenna (Single 75 ohm c...

– 7 – A—Allows viewing of scrambled channels through converter/descrambler box.B—Allows full use of TV tuner and Remote Control.NOTE: For other cable connections, consult your cable company. Some cable companies offer “premium pay” channels in which the signal is scrambled.Descrambling these signals...

– 8 – You can connect the TV to a household outlet or to the cigarette lighter of your car. AC Power Connect the polarized AC cord plug to a 120V AC 60Hz household outlet. NOTES 1. NEVER CONNECT THE AC LINE CORD PLUG TO OTHER THAN THE SPECIFIED VOLTAGE. USE THE ATTACHED POWER CORD ONLY. 2. IF THE PO...

– 9 – SELECTING A LANGUAGE QUICK USE GUIDE If you’re already familiar with TV hookup and operation, just follow the quick steps below tomake some basic connections and adjustments before using your new TV. a Place batteries in the remote control.(See page 4). s Connect the TV to an antenna or cable....

– 10 – SETTING THE CLOCK a Press the MENU button twice to bringup the menu screen and select CLOCKSET. CLOCK SET SUN – – : – – AMEXIT [MENU] : MOVE[+] / [–] : ADJUST s Use the + or – button to select the cor-rect day of the week. CLOCK SET TUE – – : – – AMEXIT [MENU] : MOVE[+] / [–] : ADJUST d Press...

– 11 – PROGRAMMING CHANNELS With automatic programming, the TV automatically places every channel you receive in itsmemory, allowing you to scan through those channels when you press the CHANNEL(Up/Down) buttons. With manual programming, you tell the TV what channels you want toscan through when you...

– 12 – ADDING/DELETING CHANNELS Manual Programming a Press the MENU button to bring up themenu screen. MENU TUE 1:35PM CLOCK SETPROGRAM TIMERPICTURE ADJUSTCH PROGRAMLANGUAGEDEMONSTRATIONEXIT [+] / [–] : MENU SELECT[MENU] : ENTER s Use the + or – button to highlight CHPROGRAM, then press the MENU but...

– 13 – SETTING THE TIMERS You can program your TV to turn on a specific channel at a preset time once (one daytimer) or at the same time every day or every week (weekly timer). You also can programyour TV to turn itself off after a specified amount of time (sleep timer). One Day Timer a Press the ME...

– 14 – Weekly Timer a Press the MENU button to bring up themenu screen. MENU TUE 1:35PM CLOCK SETPROGRAM TIMERPICTURE ADJUSTCH PROGRAMLANGUAGEDEMONSTRATIONEXIT [+] / [–] : MENU SELECT[MENU] : ENTER s Use the + or – button to highlight PRO-GRAM TIMER, then press the MENUbutton. PROGRAM TIMER ONE DAY ...

– 15 – Sleep Timer a Press the SLEEP button to bring up thesleep timer screen. SLEEP 00 s Press the SLEEP button until the desiredsleep time (10, 20, 30, 40, 50, 60, 70,80 or 90 minutes) appears on-screen.The timer will begin counting down tozero, and the on-screen display will dis-appear. When the ...

– 16 – ADJUSTING THE PICTURE a Press the MENU button to bring up themenu screen. MENU TUE 1:35PM CLOCK SETPROGRAM TIMERPICTURE ADJUSTCH PROGRAMLANGUAGEDEMONSTRATIONEXIT [+] / [–] : MENU SELECT[MENU] : ENTER s Use the + or – button to highlight PIC-TURE ADJUST, then press the MENUbutton. PICTURE ADJU...

– 17 – USING THE AUDIO, VIDEO AND EARPHONE JACKS Audio/Video Input The AUDIO and VIDEO IN (put) jacks onthe back of the TV allow you to receive au-dio (sound) and video (picture) from exter-nal sources, such as VCR, Video Disc, etc.Follow the instructions below to play videofrom an external source. ...

– 18 – CABLE TV OPERATION a Press the MENU button to bring up the main menu screen. s Use the + or – button to highlight CH PROGRAM, then press the MENU button toselect it. d Press the MENU button until CABLE appears to the right of AIR/CABLE. On CATV (Cable Television) systems, programs are brought...

– 19 – PROBLEM SOLUTION • Make sure the unit is plugged in.• Unplug the unit from the electrical outlet for 60 seconds. Then plug it in and turn it on again. No Power • Make sure the antenna is properly connected at the back of the TV. • Make sure the antenna is not broken.• Adjust the brightness an...