Page 2 - SAFETY PRECAUTIONS; TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT; CAUTION; RISK OF ELECTRIC SHOCK; DANGEROUS VOLTAGE; ATTENTION
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGEROUS VOLTAGE The lightning fl ash with arrowhead symbol, within an equil...
Page 3 - This unit should not be operated or stored near children or pets.; PLEASE SAVE THESE INSTRUCTIONS; TO GET THE MOST OUT OF YOUR SHREDDER:
To guard against injury, the following basic safety precautions must beobserved in the installation and use of this shredder. For your own safety,DO NOT ATTEMPT TO INSTALL OR OPERATE THE SHREDDER UNTILYOU READ ALL THESE INSTRUCTIONS.• Make sure the power is off when the shredder is not used. • Do no...
Page 4 - AC USAGE; The AC plug supplied with the; AC Plug
3 LOCATION OF CONTROLS POWER SOURCE 1 23 1. Function (ON/AUTO,FWD,REV) Switch2. Shredder3. Adjustable Arm AC USAGE Use the AC polarized line cord includedwith the unit for operation on AC power.Insert the plug into a convenientlylocated AC outlet having 120V, 60 Hz. NOTE: The AC plug supplied with t...
Page 5 - OPERATION
4 OPERATION Slide the Function switch to theON/AUTO or the FWD position. 1 Insert up to 5 pages of 20lb paperinto the shredder, and the unit willautomatically shred them. 2 Follow the instructions below to operate your new shredder.After unpacking the shredder, place it securely on the supplied wast...
Page 6 - PAPER TIP SOLUTION
5 OPERATION If a paper jam occurs, slide theFunction switch to the REV(Reverse) position to withdraw thenon-shredded paper. 1 REMOVING PAPER JAMS: SPECIFICATIONS On occasion, paper strips get stuckin the shredder. In this case, slidethe Function switch to the REVposition for 2 to 3 seconds. Then,sli...
Page 7 - TROUBLESHOOTING GUIDE; SYMPTOM
6 TROUBLESHOOTING GUIDE FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASEVISIT OUR WEBSITE AT WWW.MEMCORPINC.COM OR CONTACTCUSTOMER SERVICE AT 1-800-919-3647 FOR PARTS & ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993. SYMPTOM SOLUTION Shredder does not run. Power cord is not plugged in.The...
Page 8 - Printed in Hong Kong
Memcorp, Inc. Weston, FL 33331 Printed in Hong Kong Visit our website at www.memcorpinc.com MPS1440.O/M.QXD 8/12/02 11:33 AM Page 7