Memorex MILLENNIUM 4 - Manuals

Key Charts (continued) Use cursor keys to move the cursor inthe program guide and menu screens. Use SELECT/OK to choose options, PPV events, and to tune programs from theprogram guide. Use INFO to display current channel and program information. Press SETTINGS once to display your cable converter’s ...

INSTALLING BATTERIES 1. On the back of the Millennium 4, push the taband lift off the battery cover. 2. Obtain two (2) fully-charged AA alkaline bat-teries. Match the + and – marks on the batter-ies to the + and – marks in the battery case,then insert the new batteries. 3. Press the battery cover ba...

PROGRAMMING TV CONTROL NOTE: If you own a TV/VCR combination, skip this section andperform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your TV in the Setup Codes For TVs section below, and write it in the following space. TV Brand: __________________________________ The b...

PROGRAMMING VCR CONTROL NOTE: If you own a TV/VCR combination, skip this section andperform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: __________________________________ T...

PROGRAMMING TV/VCR COMBO CONTROL Locate the brand name of your TV/VCR Combo in the Setup Codes For TV/VCR Combos section below, and write it in the following space. TV/VCR Combo Brand: ________________________ The brands are listed in alphabetical order with popularcodes listed first. You will use o...

PROGRAMMING CABLE CONVERTER(OR DBS RECEIVER) CONTROL The Millennium 4 is preprogrammed at the factory tooperate the cable converter given to you by your cablecompany. However, if you have another brand or modelof cable converter or satellite receiver that you would liketo control, then you’ll need t...

4. Aim the Millennium 4 at your Cable Converteror DBS Receiver and press POWER once. The unit should turn off. If it does not respond,repeat steps 2-3, trying each code listed for yourbrand until you find one that works. If it stilldoes not work , try searching for the code (see Searching For Your C...

Setup Codes for Cable Converters (continued): Samsung 0144 Scientific Atlanta 0008, 0477, 0017, 0277, 0774, 0877Sprucer 0021 Starcom 0003 TV86 0063 Tocom 0012, 0013 Toshiba 0000 Viewstar 0063 Zenith 0000, 0525, 0899 Setup Codes for DBS Receivers: AlphaStar 0772 Echostar 0775 Expressvu 0775 General I...

PROGRAMMING CHANNEL CONTROL LOCK By activating this feature, the Millennium 4 will onlyallow access to the channel control capabilities of yourcable converter. This will guarantee that you do not inad-vertently change the channel on your TV or VCR. To Activate Channel Control Lock: 1. On the Millenn...

PROGRAMMING AUDIO CONTROL Using the Millennium 4’s Audio mode, you can also con-trol an audio component, such as CD or DVD player, astereo receiver, a stereo amplifier, or a DBS audio service. Locate the brand name of your audio component in theone of accompanying code lists (starting on the nextpag...

NOTE: Remember, to use the Millennium 4 to operate your audiocomponent, press AUDIO first. Setup Codes for CD Players: Aiwa 0157, 0124 Burmester 0420California Audio Lab 0029Carver 0157, 0179 DKK 0000 Denon 0003, 0873 Emerson 0305 Fisher 0179 Garrard 0420, 0393 Genexxa 0032, 0305 Harman/Kardon 0173H...

SEARCHING FOR YOUR CODE If your TV, VCR, Cable Converter or Audio Componentdoes not respond to the Millennium 4 after trying all ofthe codes listed for your brand, or if your brand is notlisted at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2....

CHECKING THE CODES If you have set up the Millennium 4 using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1. Turn on your TV. 2. On the Millennium 4, press and hold SETUP u...

30 CHANGING VOLUME LOCK The Millennium 4 is set to control volume of a componentthrough your TV while in the TV, VCR, or Cable mode.However, in the Audio mode, you have separate control ofof your audio component’s volume. If your TV is not remote controllable, or if you would likethe volume to be co...

31 CHANGING VOLUME LOCK To change Volume Lock to the AUDIO mode: NOTE: Performing these steps will allow you to access the volumecontrol of your audio component in all modes. 1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP . 2. Enter 9 - 9 - 3 and then pre...

32 TROUBLESHOOTING PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: LED blinks when you press a key, but homeentertainment component does not respond. SOLUTION: Make sure you are aiming the Millennium 4 at...

33 ADDITIONAL INFORMATION The Millennium 4 does not have any user-serviceableparts. Opening the case, except for the battery cover, maycause permanent damage to your Millennium 4. For help via the Internet, visit us at: cable.rcinfo.com(do not type in http:// or www before the address) For help via ...

34 NOTES Millennium 4 Mnl M4094 2/29/00 6:21 PM Page 34