Memorex c - Manuals - manualsarea.com

Page 2 - Table of Contents

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 1 - Table of Contents A. Introduction ........................................................................................................................ 2 B. General Description ................................................

Page 3 - Introduction; secure series of; General; Disk Free

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 2 - A. Introduction  This Memorex LOCK security application program applies to secure series of products only . Usage of this program on other products is prohibited.  This security application program – Memorex LOCK is designe...

Page 4 - D. Before Using the Security Application Program – Memorex; Partition 1 – Public Area; partition and will not affect this partition.; Public

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 3 - D. Before Using the Security Application Program – Memorex LOCK When plugged into a USB port, your operating system should recognize the device and display a “Removable Disk” icon. This is the “Public” partition. The security...

Page 5 - Partition 2 – Secure Area; password exists or has been disabled, display defaults to the; Secure

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 4 - Partition 2 – Secure Area The secure area is password protected and can be accessed by typing in the correct password only. If NO password exists or has been disabled, display defaults to the Public area. Assigning a password...

Page 6 - E. Introduction to Memorex LOCK; Screen; A new or unformatted device will display the following screen:

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 5 - E. Introduction to Memorex LOCK E1. Main Screen Move the mouse cursor over the icons, and the description of each button will appear, as shown in the above labels. E2. Set Password / Change Password A new or unformatted devic...

Page 7 - Note: You can only type in English letters and numbers.

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 6 - Setup Password : If no password exists, simply enter a password of your choice up to 16 characters in length. You may also enter a password hint (maximum 32 characters including spaces) to remind you of your password in the e...

Page 9 - Password; You will be prompted to enter your password. Press

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 8 - E3. Disable Password Press the second button on the lower left to “Disable” (remove) the password. You will be prompted to enter your password. Press (cancel) to cancel if you do not want to remove your current password and p...

Page 10 - Management; password for the fifth time.

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 9 - E4. Password Management You have six chances to enter the password correctly, before the secure partition of your device gets re-formatted. A screen displays at each unsuccessful trial. If you have forgotten your password, cl...

Page 11 - Device; or write data to the secure partition until you unlock it.

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 10 - The capacity of the secure partition will appear on the screen after successfully re-formatting. E5. Unlock Device If you have setup a password, when you remove your device from the USB port (or if there is a suspension in p...

Page 12 - write data to the partition.; E6. Configure Partition Sizes; You can change the sizes of the two partitions (public and secure).

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 11 - Once you have entered the correct password, the Secure partition 1 will be available until you remove your device from the USB port or if there is a suspension in power. When the Secure partition 1 is unlocked, you can read ...

Page 13 - plug your device in again after disabling the password.

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 12 - You need to “Disable” your password first before you can use this “Configure Size” (resizing) function if you have already setup a password. Follow section E3 of this manual to disable your password. It may be necessary to r...

Page 14 - Press

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 13 - Move the pointer to the left or right to change the size of the public and secure area (minimum capacity that can be set for public area is 2MB). Press (cancel) to cancel the operation if you do not want to change the curren...

Page 15 - Before Configure Size; F. Checking the Security Application Program – LOCK’s Version; from our technical staff.

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 14 - The change in capacity sizes of each partition can be verified by right clicking the drive icon and choosing properties. The secure Partition is shown in this example. Before Configure Size After Configure Size NB : After co...

Page 16 - G. Running the Program As Privileged User; My Windows 98 cannot detect my device, what should I do ?; Remove any devices that are related to USB

Document No.: M0-0001-4504-1 Effective: 14-Oct-2009 Version: C Page: - 15 - G. Running the Program As Privileged User Some users may see this following screen. Check and make sure that you have plugged in your device and your Windows operating system did recognise your device. Otherwise, please chec...