McCulloch MT 305 - Manuals - manualsarea.com

Page 2 - WHAT NOT TO DO; GENERAL SAFETY RULES; approached stop unit immediately.; WHAT TO DO

2 1 Meaning of symbols marked on the product Read the user manual before using the machine Whenever the machine is in use, safety glasses must be worn to safeguard against flying objects. Hearing protection must also be used in order to protect to operators hearing. If the operator is working in an ...

Page 3 - OUT; SPECIFICATIONS; the string from extending longer than necessary.

3 1 5 GENERAL IDENTIFICATION 7 7 8 6B 4 SAFETY FEATURES 3 16 MUFFLER SHIELD helps prevent hands, body and/or combustible materials from making contact with a hot muffler. 1. TRIMMER HEAD2. TRIMMER LINE3. SHIELD4. BLADE5. DRIVE SHAFT6A. “P” HANDLE (MT 305 CPS) 6B. “BIKE” HANDLE (MB 305 CBS)7. THROTTL...

Page 4 - WARNING; shut unit off before removing or installing; ASSEMBLY INSTRUCTIONS

5 1. Insert bracket into slot on shield. 2. Pivot shield to align holes in shield and bracket. 1. Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup. 2. Insert a small screwdriver into aligned holes. This will keep the shaft from turning while tightening tri...

Page 5 - FUEL AND LUBRICATION; OPERATING INSTRUCTIONS

Fig. 8B Fig. 8C 8 7 • INSTALLATION OF THE METAL BLADE FUEL AND LUBRICATION WARNING : Never use straight petrol in your unit. This will cause permanent engine damage and void the manufacturer’s warran- ty for that product. Never use a fuel mixture that has been stored for over 30 days. WARNING : If 2...

Page 6 - TRIMMER INSTRUCTIONS; Mowing

10 9 • WARM ENGINE START 1. Move switch to the “RUN” position (Fig. 10A).2. Place choke in HALF CHOKE “ ” position (Fig. 10B).3. Grasp throttle handle firmly, squeeze throttle trigger to FULL position. 4. Pull starter rope briskly until engine starts, but no more than 6 times. Keep throttle at FULL ...

Page 7 - REPLACING THE LINE; MAINTENANCE INSTRUCTIONS; OPERATING INSTRUCTIONS FOR USE WITH; Sweeping

12 11 • Blade Thrust is a reaction that only occurs when using a bladed unit. This reaction can cause serious injury. Carefully study this section. It is important that you understand what causes blade thrust, how you can reduce the chance of its occurring, and how you can remain in control of unit ...

Page 8 - CAUTION; Remove fuel from unit and store

14 13 - Turn idle speed screw clockwise to increase engine speed if engine stalls or dies. - Turn idle speed screw counterclockwise to decrease engine speed if trimmer head moves or spins at idle speed. - Engine will not idle when the throttle is released. - The trimmer head moves/spins at idle spee...

Page 9 - TROUBLE SHOOTING THE ENGINE; EC DECLARATION OF CONFORMITY; Business name of the manufacturer: Husqvarna AB

16 15 TROUBLE SHOOTING THE ENGINE PROBLEM Unit won’t start or starts but will not run. Unit starts, but engine has low power. Engine hesitates.No power under load. Runs erratically. Smokes excessively. PROBABLE CAUSE Incorrect starting procedures.Incorrect carburetor mixture adjustmentsetting.Fouled...