Page 2 - SAFETY RULES; Safe Operation Practices for Ride-On Mowers; ways; po nents contain or emit chem; WARNING
2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand, and follow all...
Page 3 - SAFE HANDLING OF GASOLINE
3 SAFETY RULES Safe Operation Practices for Ride-On Mowers • Be sure the area is clear of bystanders before operat-ing. Stop machine if anyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary. Al ways look down and behind before and while back-ing. • Nev...
Page 4 - TABLE OF CONTENTS; CONGRATULATIONS; CUSTOMER RESPONSIBILITIES
4 TABLE OF CONTENTS SAFETY RULES ......................................................... 2-3PRODUCT SPECIFICATIONS ....................................... 4CUSTOMER RESPONSIBILITIES ................................. 4ASSEMBLY ................................................................. 5-6OPE...
Page 5 - UNASSEMBLED PARTS; Slope Sheet; ASSEMBLY; TOOLS REQUIRED FOR ASSEMBLY; UNPACK CARTON
5 UNASSEMBLED PARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Stan dard wrench sizes are listed. (1) 1/2" wrench Tire pressure gauge (2) 7/16" wrenches Utility knife Pliers When right or left hand is mentio...
Page 6 - CHECK TIRE PRESSURE; CHECKLIST
6 ASSEMBLY CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.• Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be prop-e...
Page 7 - OPERATION
7 OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) OVER TEMP LIGHT KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORW...
Page 8 - KNOW YOUR TRACTOR; READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR; POSITION
8 OPERATION KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Our tractors conform to the applicable sa...
Page 9 - HOW TO USE YOUR TRACTOR
9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spec-...
Page 10 - TO OPERATE ON HILLS; TO TRANSPORT; NOTE; TOWING CARTS AND OTHER AT TACH MENTS; Do not mow in reverse unless
10 TO OPERATE ON HILLS WARNING: Do not drive up or down hills with slopes great er than 15° and do not drive across any slope. • Choose the slowest speed before starting up or down hills.• Avoid stopping or changing speed on hills.• If stopping is absolutely necessary, push clutch/brake pedal quickl...
Page 11 - ADD GASOLINE; BEFORE STARTING THE ENGINE; CHECK ENGINE OIL LEVEL; MOWING TIPS
11 OPERATION ADD GASOLINE • Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular un lead ed gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in...
Page 12 - LUBRICATION CHART; GENERAL RECOMMENDATIONS; BEFORE EACH USE; MAINTENANCE
12 T RAC T 0 R 1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions. E N G I N E 3 2 2 2 2 3 - Replace blades more often when mowing in sandy soil. 4 - Not required if equipped with maintenance-fre...
Page 13 - TRACTOR; BRAKE OPERATION; BLADE CARE
13 MAINTENANCE BLADE BLADE BOLT (SPECIAL) CENTER HOLE STAR MANDREL ASSEMBLY TRACTOR Always observe safety rules when per form ing any main te nance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then b...
Page 15 - CLEANING; Avoid all pinch points and
15 IN-LINE FUEL FILTER (See Fig. 15) The fuel filter should be replaced once each season. If fuel filter becomes clogged, ob struct ing fuel flow to car bu re tor, re place ment is re quired.• With engine cool, remove filter and plug fuel line sec tions. • Place new fuel filter in position in fuel l...
Page 16 - SERVICE AND ADJUSTMENTS; Depress clutch/brake pedal fully and set parking brake.
16 SERVICE AND ADJUSTMENTS WARNING: TO AVOID SE RI OUS IN JU RY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift lever in neutral position. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and ...
Page 18 - TO LEVEL MOWER
18 SERVICE AND ADJUSTMENTS • If adjustment is necessary, see step in Visual Adjust-ment instructions above. • Recheck measurements, adjust if necessary until both sides are equal. FRONT-TO-BACK ADJUSTMENT (See Figs. 26 & 27) IMPORTANT: Deck must be level side-to-side. To obtain the best cutting ...
Page 19 - TO CHECK BRAKE
19 SERVICE AND ADJUSTMENTS TO REPLACE MOTION BELT DRIVE (See Fig. 29) Park the tractor on level surface. En gage parking brake. For as sis tance, there is a belt installation guide decal on bottom side of left footrest. BELT REMOVAL • Remove mower (See “TO RE MOVE MOWER” in this section of manual). ...
Page 21 - c i d e n t a l
21 02778 SERVICE AND ADJUSTMENTS TO REPLACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood. INTERLOCKS AND RELAYS Loose or damaged wirin...
Page 22 - STORAGE; BATTERY; FUEL SYSTEM; ENGINE OIL; OTHER
22 STORAGE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before stori...
Page 23 - TROUBLESHOOTING POINTS
23 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Dir...
Page 24 - PROBLEM
24 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Excessive vibration 1. Worn, bent or loose blade. 1. Replace blade. Tighten blade bolt. 2. Bent blade mandrel. 2. Replace blade mandrel. 3. Loose/damaged part(s). 3. Tighten loose part(s). Replace damaged parts. Engine continues to run when oper-ato...
Page 25 - SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
25 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL,NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mowslopes greater...
Page 26 - LIMITED WARRANTY
26 LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materi-als and work man ship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, w...