Page 2 - KNOW YOUR UNIT
-- 2 -- KEY TO SYMBOLS Approved protective goggles or visor, ear protection, and face mask in dusty environments must be worn. The blower operator must make sure that no bystanders or animals come nearer than 15 meters. Whenever several operators are working in the same work area, they should mainta...
Page 4 - ASSEMBLY; CARTON CONTENTS; BLOWER ASSEMBLY; BLOWER TUBE ASSEMBLY
-- 4 -- WHAT IS WHAT? 1. Throttle trigger 10. Lower blower tube 2. STOP switch 11. High-- speed nozzle 3. Primer button 12. Elbow tube 4. Start lever 13. Vacuum bag 5. Fuel cap 14. Upper vacuum tube 6. Starter rope 15. Lower vacuum tube 7. Vacuum handle 16. Throttle position lever 8. Spark plug 17. ...
Page 5 - VACUUM ASSEMBLY; VACUUM BAG ASSEMBLY
-- 5 -- Blower Outlet Rib Groove 2. Secure the tube by turning the bolt clock- wise. 3. Align the slots on the lower blower tube with the tabs on the upper blower tube. Upper Blower Tube Tab Lower Blower Tube Slot Tube clampbolt and nut 4. Slide the lower blower tube onto the upper blower tube. 5. T...
Page 6 - SHOULDER STRAP ADJUSTMENT
-- 6 -- 3. Hold the vacuum inlet cover open until up- per vacuum tube is installed. Vacuum Inlet Cover Vacuum Inlet 4. Align the tabs on the inside of the vacuum in- let with the slots on the upper vacuum tube. Tab Slot 5. Push the upper vacuum tube into the vac- uum inlet. Turn the tube countercloc...
Page 7 - OPERATION
-- 7 -- OPERATION OPERATING POSITION Blower Vacuum Hearing Protection Eye Protection Hearing Protection OPERATING TIPS S While vacuuming or blowing debris, holdthe unit with the muffler side facing awayfrom your body and clothes (see OPERAT-ING POSITION). S To reduce the risk of hearing loss associa...
Page 9 - MAINTENANCE; INSPECT AND CLEAN UNIT & LABELS
-- 9 -- MAINTENANCE WARNING: Avoid touching muffler unless engine and muffler are cold. A hotmuffler can cause serious burns. WARNING: Disconnect the spark plug before performing maintenance exceptfor carburetor adjustments. CHECK FOR LOOSEFASTENERS AND PARTS S Muffler S Spark Plug Boot S Air Filter...
Page 10 - STORAGE; EXTERNAL SURFACES
-- 10 -- Hood Screws SparkArrestingScreen Muffler Cover Replace the spark arresting screen every 50hours of operation or if any damage or breaksin the screen are noted. NOTE: Do not attempt to clean the spark arresting screen.1. Remove 3 screws from muffler cover. Remove muffler cover. 2. Loosen and...
Page 11 - TROUBLESHOOTING TABLE
-- 11 -- 1. See “Fueling Your Unit.”2. Replace with correct spark plug.3. Contact an authorized service dealer.4. Contact an authorized service dealer. TROUBLE CAUSE REMEDY Engine will notstart. 1. Engine flooded.2. Fuel tank empty.3. Spark plug not firing.4. Fuel not reaching carburetor. 5. Compres...
Page 12 - DECLARATION OF CONFORMITY; TECHNICAL DATA
-- 12 -- DECLARATION OF CONFORMITY EC Declaration of Conformity (Only applies to Europe) We, Husqvarna AB, SE-- 561 82 Huskvarna, Sweden, Tel: +46-- 36-- 146000, as authorisedrepresentative in the Community, declare that the leaf blower model McCulloch Mac GBV 345from serial numbers 2009-- 031N00001...