McCulloch 95390047900 - Manuals

IMPORTANT ! make sure the chainsaw is not pluggedin before performing assembly or maintenance.Assembly of bar and chain.Remove the bar fastening knob (B1 in thedrawing), remove the pinion cover (10). Install the chain on the bar as shown in the figureB3, making sure the cutting edges are facing in t...

ENGLISH - 4 tree and the angle of the upper and lower cutsshould be at least 45°. Main cut The main cut is made on the opposite side from thedirectional cut and must be perfectly horizontal, andat a height about 3 cm above the base of thedirectional cut (see illustration) Finish the cut at least 1/1...

Motor does Motor turns Chainsaw Motor turns not start with difficulty starts but does improperly and/or or loses power not cut properly at reduced speed Make sure the mains are powered · Make sure the machine is properly plugged into the wall socket · Make sure neither the power cable nor the extens...

PN. 249066 REV. 01 (10/02) EC Declaration of Conformity The undersigned, authorised by E.O.P.I., declares that the followingproduct: ES 18, manufactured by E.O.P.I., 23868 Valmadrera (LC), Via Como 72, Italy, is in accordance with the European Directives 98/37/CEE (Machinery Directive), 73/23/EEC (L...